Dear Ricardo,
in message <[EMAIL PROTECTED]> you wrote:
> ml507_flash_config: unconfig
> BOARD_DIR=$(obj)board/xilinx/ml507 \
> TEXT_BASE=0xFE360000 \
> LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-rom.lds \
> CONFIG_SCRIPT="ml507 ppc ppc4xx ml507 xilinx" \
> $(MAKE) xilinx_ppc440
>
> xilinx_ppc440: unconfig
> @mkdir -p $(obj)include $(BOARD_DIR)
> @cp $(LINK_SCRIPT) $(BOARD_DIR)/u-boot.lds
> @echo "TEXT_BASE = $(TEXT_BASE)" > $(BOARD_DIR)/config.mk
> @$(MKCONFIG) $(CONFIG_SCRIPT)
The Makefile is not the right place to provide configuration
information. It shouls select a target board, and build it, nothing
more.
All board specific configuration information should be kept in the
board specific files only (please also keep in mind the next one who
has to port Linux to a new board - config information should not be
scattered over too many polaces, and especially no into common ,
central files).
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Change is the essential process of all existence.
-- Spock, "Let That Be Your Last Battlefield",
stardate 5730.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
