Dear "Wolfgang Denk"
OK, just two questions.
All the boards I am using use the same link script, shall I copy
it to its specific directory? Do you really want this? It is not
better to do it like the MODE B (cp common_script to board dir)?
I want to create two different targets: ml507 and ml507_flash.
Could you write an example of how to do this without writing the
TEXT_BASE in the Makefile? I did it in this way because I didn't found
any other method in the main Makefile
Thank you very much for your help
Regards
On Fri, Aug 29, 2008 at 18:24, Wolfgang Denk <[EMAIL PROTECTED]> wrote:
> Dear "Ricardo Ribalda Delgado",
>
> In message <[EMAIL PROTECTED]> you wrote:
>>
>> Before this "unification" patch I send another path that did treat
>> the avnet board as a new board (a lot of code replication). This is
>> what I call the old way.
>>
>> Let me be more clear. What do we want:
>>
>> MODE A
>> =========
>>
>> ml507_config: unconfig
>> BOARD_DIR=$(obj)board/xilinx/ml507 \
>> TEXT_BASE=0x3000000 \
>> LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-ram.lds \
>> CONFIG_SCRIPT="ml507 ppc ppc4xx ml507 xilinx" \
>> $(MAKE) xilinx_ppc440
>
> BOARD_DIR, TEXT_BASE, LINK_SCRIPT and CONFIG_SCRIPT have no place in
> the top level Makefile. Please move this to board specific
> directories.
>
> The normal entry for a board should consist of not more than
>
> <name>_config: unconfig
> @$(MKCONFIG) <name> ppc4xx xilinx <name>
>
> or similar.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
> "Most people would like to be delivered from temptation but would
> like it to keep in touch." - Robert Orben
>
--
Ricardo Ribalda
http://www.eps.uam.es/~rribalda/
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
