> > Tap Page-Dn until '1' is reached and then like an odometer the first > > numeral rolls down to '4', the next tap rolls the first numeral down > > to '3' and so on while leaving the second numeral at '1', then tap > > Page-Up to set the second numeral. That would require a few taps of > > Page-Up until the report of 459 is reached. > > > Ok, That would only extend the functionality of CHANGE_RST. If changing > only the first two numbers are enough that would be the most easy > solution. If key auto repeat does also work for PgUp/PgDn (needs to be > tested) you need not to much key presses to sweep over the range.
One option could be to let the user configure the preferred reports (say 599,559,339) and PgUp/Dn would cycle through them. This would save a bunch of keystrokes for a user not needing too precise RST. The sequential rolling with PgUp/Dn is not too practical when it comes to give someone 338. My feeling is that with a handful configured reports one could effectively cover the requirement for sent RST. For received RST direct entry would be better. But that could be done with a wider exchange field. 73, Zoli
