>>>>> "Doug" == Doug Hughes <d...@will.to> writes:
Doug> On 3/14/2013 11:43 PM, John Stoffel wrote: >> Oliver> On 2013-03-14 17:02, Matt Lawrence wrote: >>>> Do you have any particular brans or suppliers to recommend? >> >> Just to chime in here. I ended up getting a bunch of laser printer >> cable label sheets, and using 'glabels' to setup and print up a bunch >> of them. But it hasn't worked out as well as I hoped. >> >> Basically, they start to unwind after a time, and I'm now afraid I'm >> going to lose the labels off some of my cables. We ordered then from >> cablelabelsusa.com and I think we got the LS 10 877S sheets from them >> and with a little fiddling they printed out just fine. >> >> Would I do them again... not sure. But it was cheap at around $60 to >> get 50 sheets which is a bunch of labels, printed in pairs. >> >> I can provide a template for glabel too I think, assuming I can find >> it again. :-) >> Doug> John, did you try it with the self laminating sheets? Doug> http://www.cabletiesandmore.com/label-sheets.php Doug> (that would solve your peel off problem, if glabels will support Doug> it) Yup, those are the exact labels I used, sorry I didn't confirm that before, I was going off old email from home. Anyway, while they do work, and do self-laminate, they also do seem to peel up after a while. The lamination that is. So while I'm generally happy with them, I worry for their durability. But I do like being able to just quickly label a cable with matching numbers and let it go at that. John _______________________________________________ Tech mailing list Tech@lists.lopsa.org https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech This list provided by the League of Professional System Administrators http://lopsa.org/
