On 3/14/2013 11:43 PM, John Stoffel wrote:
Oliver> On 2013-03-14 17:02, Matt Lawrence wrote:
Do you have any particular brans or suppliers to recommend?
Just to chime in here. I ended up getting a bunch of laser printer
cable label sheets, and using 'glabels' to setup and print up a bunch
of them. But it hasn't worked out as well as I hoped.
Basically, they start to unwind after a time, and I'm now afraid I'm
going to lose the labels off some of my cables. We ordered then from
cablelabelsusa.com and I think we got the LS 10 877S sheets from them
and with a little fiddling they printed out just fine.
Would I do them again... not sure. But it was cheap at around $60 to
get 50 sheets which is a bunch of labels, printed in pairs.
I can provide a template for glabel too I think, assuming I can find
it again. :-)
John, did you try it with the self laminating sheets?
http://www.cabletiesandmore.com/label-sheets.php
(that would solve your peel off problem, if glabels will support it)
_______________________________________________
Tech mailing list
Tech@lists.lopsa.org
https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech
This list provided by the League of Professional System Administrators
http://lopsa.org/
