hi Maurice, you wrote: 1. When I'm writing a text message using the Qwerty keyboard, when I press the symbols key to enter say an apostrophe or quotation marks, The phone just freezes and I have to press the Close key a few times to get the phone back to normality. Any ideas on this or is there a problem with the symbols key and the version of Talks at present. I have never had problems with symbols with say the n97 or N86.
i already answered you in the yesterday mail. current release of talks does not work properly in symbol table for S^3 phones such as N8, E7, C7 and C6-01. the only work around for this is, use the virtual keypad and tap the number 1 to select the symbol you want. 2. again using the Qerty keypad, is there a way of pressing enter say when selcting a contact or do you still have to confirm this via the touch screen. On the N97 and Mini I think I remember there was an enter key in the middle of the cursor pad. i don't really get your question. but if you are asking the "enter" key for the N8, i dont think there's such key, you must tap the zero key 3 time to perform an enter. but if you are asking the "enter" key for the E7, there's the fizical key on the slide out qwerty keyboard. it is located on the right side of the qwerty keyboard. HTH. -- Cheers, Allan (WKF) "Life is impermanent, happiness is not a necessity, a person must cherish the people around them." _______________________________________________ Talks mailing list Talks@talksusers.com http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/
