Please find attached the output from smartctl -a from a (failing)
Samsung HD103SI, which does not appear to be in your database (as at
version 5.39.1)
Regards,
Keith
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD103SI
Serial Number: S1VSJ9AS716647
Firmware Version: 1AG01118
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Thu Oct 7 10:46:27 2010 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 114) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12725) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 213) minutes.
Conveyance self-test routine
recommended polling time: ( 23) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 096 051 Pre-fail Always
- 3387
3 Spin_Up_Time 0x0007 081 081 011 Pre-fail Always
- 6590
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline
- 10916
9 Power_On_Hours 0x0032 099 099 000 Old_age Always
- 6846
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 305
13 Read_Soft_Error_Rate 0x000e 099 096 000 Old_age Always
- 3386
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 8955
188 Command_Timeout 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 083 060 000 Old_age Always
- 17 (Lifetime Min/Max 12/17)
194 Temperature_Celsius 0x0022 082 057 000 Old_age Always
- 18 (Lifetime Min/Max 12/20)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 2658821
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 089 089 000 Old_age Always
- 450
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 1
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always
- 4
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 04 0b 00 00 a0 at LBA = 0x0000000b = 11
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
21 00 04 0b 00 00 a0 00 02:42:32.310 READ SECTOR(S) [OBS-5]
00 00 01 01 00 00 a0 ff 02:42:32.010 NOP [Abort queued commands]
00 00 01 01 00 00 a0 ff 02:42:21.970 NOP [Abort queued commands]
ec 00 04 00 00 00 a0 02 02:41:47.050 IDENTIFY DEVICE
00 00 01 01 00 00 a0 ff 02:41:46.670 NOP [Abort queued commands]
Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 04 0b 00 00 a0 at LBA = 0x0000000b = 11
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
21 00 04 0b 00 00 a0 00 00:06:22.090 READ SECTOR(S) [OBS-5]
ee 41 9d 3b 3e ce 43 00 00:06:22.000 IDENTIFY DEVICE DMA [OBS-4]
00 00 01 01 00 00 a0 ff 00:06:21.700 NOP [Abort queued commands]
00 00 01 01 00 00 a0 ff 00:05:46.400 NOP [Abort queued commands]
Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 53 33 11 00 00 e0 Error: ICRC, ABRT 51 sectors at LBA = 0x00000011 = 17
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 44 00 00 00 e0 00 00:04:46.570 READ DMA
c8 00 08 bf 00 22 e7 00 00:03:42.350 READ DMA
c8 00 08 bf e0 5f e7 00 00:03:25.010 READ DMA
c8 00 08 bf 00 5e e7 00 00:03:25.000 READ DMA
c8 00 08 bf e0 71 e7 00 00:03:23.210 READ DMA
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 d0 00 00 00 00 a0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 6b 9c 1c a0 e0 00 00:12:55.020 WRITE DMA
ca 00 01 b6 e5 40 e1 00 00:12:55.020 WRITE DMA
c8 00 08 4f e1 82 e1 00 00:12:55.020 READ DMA
c8 00 08 07 e1 82 e1 00 00:12:55.000 READ DMA
ea 00 00 46 8a a1 a0 00 00:12:54.970 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 20% 6846
1358010876
# 2 Short offline Completed: read failure 20% 6837
1358010876
# 3 Short offline Completed: read failure 20% 6820
1358010876
# 4 Short offline Completed: read failure 20% 6804
1358010876
# 5 Short offline Completed: read failure 20% 6782
1358010876
# 6 Short offline Completed: read failure 20% 6780
1358010876
# 7 Extended offline Completed without error 00% 6772 -
# 8 Short offline Completed without error 00% 6766 -
# 9 Short offline Completed without error 00% 6745 -
#10 Short offline Completed without error 00% 6721 -
#11 Short offline Completed without error 00% 6704 -
#12 Short offline Completed without error 00% 6689 -
#13 Extended offline Completed without error 00% 6677 -
#14 Short offline Completed without error 00% 6671 -
#15 Short offline Completed: read failure 20% 6669
1193483063
#16 Short offline Completed: read failure 20% 6668
1193483063
#17 Short offline Completed: read failure 20% 6665
1193483582
#18 Extended offline Completed: read failure 30% 6661
1193482933
#19 Short offline Completed without error 00% 6641 -
#20 Extended offline Completed: read failure 30% 6621
1193482933
#21 Short offline Completed without error 00% 6617 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
