url: http://escribe.com/health/thesilverlist/m62854.html
Re: CS>Yellow tinted CS!!
From: Jonathan B. Britten
Date: Mon, 29 Sep 2003 22:36:43

  > I have  observed  the  lunar  influence  on  CS  color  on several
  > occasions. I   hypothesize   that   the   increased  particle size
  > producing the higher TE and the yellowish color is a gravitational
  > influence, but that is merely conjectural. All the same,  my hunch
  > is that  some   research   would   probably   reveal  a  number of
  > manufacturing processes that take moon phase into account.

  > If anyone can educate me on this topic, I am willing to learn.

  > JBB

  If you take two process that have a high probability  of occurrence,
  you will  inevitably  find a correlation between  them,  even though
  they have no connection.

  I use  a  high-compliance  current  source  (ascii  circuit recently
  posted), and Faraday's equations to time my cs.

  I find  the yellow tint starts occurring over a very small  range of
  ppm. In other words, the process saturates quickly, and is extremely
  sensitive to the ion concentration at the end of the brew time. Just
  one or  two  ppm difference is all it takes to make a  brew  that is
  clear, or one that shows color.

  Most people run with constant voltage and have no current limiting.

  This means  the  brew can easily reach the current  level  needed to
  produce silver oxide, which produces the tint. The process is out of
  control, but the moon has no influence on the outcome.

  People who  do  use current limiting generally run  at  high current
  density. This  means the regulator is saturated for a  large portion
  of the brew time.

  The production of oxide then depends on the diffusion of  silver and
  hydroxyl ions  through  the solution, which depends on  the  AC line
  voltage at  the  time,  the temperature of  the  dw,  any convection
  currents, and  probably a dozen other variables. Again,  the process
  is out of control, and the moon has no influence on these factors.

  The moon  is  too far away to influence any of  the  parameters that
  affect the  cs process. When you get unrepeatable results,  you need
  to control these parameters better.

Best Regards,

Mike Monett


--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>