Assuming that your current increases in a linear manner from .040 ma at start to 1.3 ma after 1 hour (avg of .67 ma over 1 hour), and 750ml water volume, the Faraday Calculator shows that you should have a maximum concentration of 3.6 ppm of silver. Not concentrated enough to dilute, barely adequate for use as it is. You should probably run this for another hour to get a higher concentration.
Dan On Wed, Apr 25, 2012 at 8:10 AM, Thomas Soares <[email protected]> wrote: > 2012/4/24 Dan Nave <[email protected]> >> >> How much water is in your vessel? > > > About 750 ml > >> >> What is the average current during the one hour? (Average it out.) > > > With no "seed solution" it starts about 40 mA and after one hour 1.3 mA. The > current is maintained always below 2 mA by solution agitation. > > TTS. -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: <mailto:[email protected]?subject=unsubscribe> Archives: http://www.mail-archive.com/[email protected]/maillist.html Off-Topic discussions: <mailto:[email protected]> List Owner: Mike Devour <mailto:[email protected]>
