Re: [weewx-user] Problem after downgrading

Hello Pierre-Yves and thanks for the suggestion. It worked and with some more tweaks to the driver the station is functioning normally. On Monday, March 18, 2024 at 5:39:31 PM UTC+2 Pierre-Yves wrote: > Hello George, > Maybe try: > sudo usermod -aG i2c weewx > and > sudo usermod -aG gpio we

[weewx-user] Re: Cumulus MX -> weewx

And for example, when I want to view my CumulusMX Dashboard, I call for: "http://192.168.0.40:8998/"; On Tuesday, March 19, 2024 at 9:06:32 PM UTC+1 Sidney wrote: > Hi, I believe I've successfully installed weewx. The manual says: > > After about 5 minutes (the exact length of time depends on y

Re: [weewx-user] Re: Cumulus MX -> weewx

if you have a webserver installed, entering http://ip-address-of-the-weewx-server/weewx will show you the last created Seasons skin On 19.03.2024 21:06, Sidney wrote: Hi, I believe I've successfully installed weewx. The manual says: After about 5 minutes (the exact length of time depends on y

Re: [weewx-user] Re: Cumulus MX -> weewx

correct, but weewx (its Seasons skin) doesn't have a realtime dashboard (except you install the mqtt based Belchertown skin). The update interval is defined in weewx.conf and could go down to one minute instead of five minutes (in theory - in practice to be found out if the reports can complete

Re: [weewx-user] WS3500 - Only getting Station Name and Time/Date ???

Hello, Anybody facing something similar ? I'm only getting "unrecognized parameter b'mac: '" and "unrecognized parameter fields=timezone,utc_offset,dst,date_sunrise,date_sunset'", "ignored parameter stationtype=EasyWeatherV1.5.2". Thank you for your help. On Tue, Mar 12, 2024 at 10:3

Re: [weewx-user] WS3500 - Only getting Station Name and Time/Date ???

can you post your weewx.conf entries of the [Interceptor] stanza ? Also a screecopy of your WS View Plus customized server entries would be helpful. I have just run out of my crystal balls ... And a WS3500 is what ?  A Sainlogic WS3500, an Ecowitt WH2910 clone ? The more precise you are in your

Re: [weewx-user] WS3500 - Only getting Station Name and Time/Date ???

Hi, Let me have a look tomorrow evening so in approx 24h I hope... It is a Sainlogic WS3500 👍. Thank you for your help. On Tue, Mar 19, 2024, 21:23 'Rainer Lang' via weewx-user < weewx-user@googlegroups.com> wrote: > can you post your weewx.conf entries of the [Interceptor] stanza ? > Also a s

Re: [weewx-user] Re: Cumulus MX -> weewx

You didn't provide enough detail to really understand your setup. Does Cumulus MX have some software it runs that responds on port 8998 ? Did you even install a normal webserver such as nginx or apache ? If not, see the wiki (link)

Re: [weewx-user] Re: Cumulus MX -> weewx

Thank you, Vince. Seems I'm a bit lost in it and will be exploring it to find the trouble. On Tuesday, March 19, 2024 at 10:57:24 PM UTC+1 vince wrote: > You didn't provide enough detail to really understand your setup. Does > Cumulus MX have some software it runs that responds on port 8998 ?

Re: [weewx-user] Re: Cumulus MX -> weewx

And to explain... I got the Raspberry unit which was already running Cumulus MX software and now I'm trying to use weewx. But as I'm seeing for the first time, it seems a bit tough. On Tuesday, March 19, 2024 at 11:43:25 PM UTC+1 Sidney wrote: > Thank you, Vince. > Seems I'm a bit lost in it a

Re: [weewx-user] Re: Cumulus MX -> weewx

@Sidney - I think you are confusing a few things and are comparing apples with pears. You may not be aware of the functionality of and the need to have a webserver (program). CumulusMX has an inbuilt webserver, but not one which is available to users other than the CMX users. So when you can rea

Re: [weewx-user] Re: Cumulus MX -> weewx

I do follow now. Thank you for the explanation. I'm now trying to install a web server to get the page load on the local network. Let's see whats next then. Thanks again. On Tuesday, March 19, 2024 at 11:54:09 PM UTC+1 Rainer Lang wrote: > @Sidney - I think you are confusing a few things and ar

Re: [weewx-user] WS3500 - Only getting Station Name and Time/Date ???

Normally, if all the rules are followed, weewx reading data from a WH2910 console via interceptor driver is straightforward. But who knows how you have configured your console and weewx. Therefore the weewx.conf and customized server entry screenshot is needed. Apart from that, I recommend to up

Re: [weewx-user] Re: Cumulus MX -> weewx

I'm not sure if you have understood the weewx concepts ... What would be the use of changing skins - except you don't like the Seasons skin But  before you do this, you better get weewx running with the default Seasons skin. Once running, you can add or switch skins. You probably want to

Re: [weewx-user] Re: Cumulus MX -> weewx

Type: Davis Vantage Pro2/Vue Station model: WeatherDuino 4Pro DB Connection: TCP/IP IP: http://192.168.0.39 Thank you Rainer. On Wednesday, March 20, 2024 at 12:42:51 AM UTC+1 Rainer Lang wrote: > I'm not sure if you have understood the weewx concepts ... > > What would be the use of changing

Re: [weewx-user] Re: Cumulus MX -> weewx

try reading (and applying) https://weewx.com/docs/5.0/hardware/vantage/ On 20.03.2024 01:07, Sidney wrote: Type: Davis Vantage Pro2/Vue Station model: WeatherDuino 4Pro DB Connection: TCP/IP IP: http://192.168.0.39 Thank you Rainer. On Wednesday, March 20, 2024 at 12:42:51 AM UTC+1 Rainer Lang

Re: [weewx-user] Re: Cumulus MX -> weewx

in addition, look up https://weewx.com/docs/5.0/utilities/weectl-station/#create-a-new-station-data-directory there you find the example how to create a Vantage station (of course the values for altitude, longitude, latitude have to be replaced by your values) |weectl station create --no-pro

Re: [weewx-user] Re: Cumulus MX -> weewx

Thank you. I'm on it. Getting some issues error messages unfortunately. Do you please have an idea what's wrong? root@kralovice:~# weectl device --info Using configuration file */etc/weewx/weewx.conf* Using driver weewx.drivers.vantage. Using Vantage driver version 3.6.2 (weewx.drivers.vantage

Re: [weewx-user] Re: Cumulus MX -> weewx

Done. On Wednesday, March 20, 2024 at 1:33:24 AM UTC+1 Rainer Lang wrote: > in addition, look up > > > https://weewx.com/docs/5.0/utilities/weectl-station/#create-a-new-station-data-directory > > there you find the example how to create a Vantage station (of course the > values for altitude, lon