in addition, look up
https://weewx.com/docs/5.0/utilities/weectl-station/#create-a-new-station-data-directory
there you find the example how to create a Vantage station (of course
the values for altitude, longitude, latitude have to be replaced by your
values)
|weectl station create --no-prompt --driver=weewx.drivers.vantage \
--altitude="400,foot" --latitude=45.1 --longitude=-105.9 \
--location="My Special Station"|
the result should be a properly configured weewx.conf
On 20.03.2024 01:20, Rainer Lang wrote:
try reading (and applying) https://weewx.com/docs/5.0/hardware/vantage/
On 20.03.2024 01:07, Sidney wrote:
Type: Davis Vantage Pro2/Vue
Station model: WeatherDuino 4Pro DB
Connection: TCP/IP
IP: http://192.168.0.39
Thank you Rainer.
On Wednesday, March 20, 2024 at 12:42:51 AM UTC+1 Rainer Lang wrote:
I'm not sure if you have understood the weewx concepts ...
What would be the use of changing skins - except you don't like
the Seasons skin ....
But before you do this, you better get weewx running with the
default Seasons skin.
Once running, you can add or switch skins.
You probably want to use data from your station - then you have
to change your station, not the skin
You need to install the driver for your station ...
So you have to install the respective weewx driver for your
station which would then replace the Simulator station.
What's your station ? Brand, model ?
On 20.03.2024 00:35, Sidney wrote:
I was able to instal nginx. yay! Thanks for advising me.
Screenshot 2024-03-20 at 0.26.53.png
I'm now trying:
change the skin and get out of simulation to real data.
Unfortunately, I have no luck with it.
I'm using the following:
# Stop the daemonsudosystemctlstopweewx # Reconfigure to use
your hardwareweectlstationreconfigure # Delete the old
databaserm/var/lib/weewx/weewx.sdb # Start the
daemonsudosystemctlstartweewx
But seems it does not reflect my selected meteo station and
keeps using Simulation.
The same with skin which I try to change in*etc/weewx/weewx.conf
*but it does not reflect anything.
I'm sorry for these questions, your support is very helpful.
On Tuesday, March 19, 2024 at 11:58:18 PM UTC+1 Sidney wrote:
I do follow now. Thank you for the explanation. I'm now
trying to install a web server to get the page load on the
local network. Let's see whats next then. Thanks again.
On Tuesday, March 19, 2024 at 11:54:09 PM UTC+1 Rainer Lang
wrote:
@Sidney - I think you are confusing a few things and are
comparing apples with pears.
You may not be aware of the functionality of and the
need to have a webserver (program).
CumulusMX has an inbuilt webserver, but not one which is
available to users other than the CMX users.
So when you can reach CMX via a defined port and the URL
of your weewx server e.g. IP:8998 this doesn't mean that
a generally available webserver is installed.
So, as Vince already mentioned, a webserver like nginx
or apache2 needs to be installed for you to see the
weewx skin via a browser via the URL.
You can of course open /var/www/html/weewx/index.html in
a web browser by loading it into the browser, but to
reach it via the URL ip-address/weewx a webserver is
needed which has access to the html-root (default
/var/www/html) and subdirectories and replies to your
http request.
On 19.03.2024 23:43, Sidney wrote:
Thank you, Vince.
Seems I'm a bit lost in it and will be exploring it to
find the trouble.
On Tuesday, March 19, 2024 at 10:57:24 PM UTC+1 vince
wrote:
You didn't provide enough detail to really
understand your setup. Does Cumulus MX have some
software it runs that responds on port 8998 ?
Did you even install a normal webserver such as
nginx or apache ? If not, see the wiki (link)
<https://github.com/weewx/weewx/wiki/Configure-a-web-server-(Apache,-NGINX-or-lighttpd)>
for
how to do install one and hook it together with weewx.
On Tuesday, March 19, 2024 at 1:23:58 PM UTC-7
Sidney wrote:
Thank you for a quick response. web server is
for sure installed as I do see Cumulus web server:
Screenshot 2024-03-19 at 21.20.46.png
When I try to go to http://192.168.0.40/weewx
I'm getting This site can’t be reached. Sorry
for probably a silly question. Appreciate your
support. THank you.
On Tuesday, March 19, 2024 at 9:12:41 PM UTC+1
Rainer Lang wrote:
correct, but weewx (its Seasons skin)
doesn't have a realtime dashboard (except
you install the mqtt based Belchertown skin).
The update interval is defined in
weewx.conf and could go down to one minute
instead of five minutes (in theory - in
practice to be found out if the reports can
complete in that short time)
On 19.03.2024 21:07, Sidney wrote:
And for example, when I want to view my
CumulusMX Dashboard, I call for:
"http://192.168.0.40:8998/";
<http://192.168.0.40:8998/>
On Tuesday, March 19, 2024 at 9:06:32 PM
UTC+1 Sidney wrote:
Hi, I believe I've successfully
installed weewx. The manual says:
After about 5 minutes (the exact
length of time depends on your archive
interval), copy the following and
paste into a web browser. You should
see your station information and data.
/var/www/html/weewx/index.html
Can anyone help me how to call for
this index from another computer on
the same network? I'm connected to my
Raspberry over SSH and cannot open the
browser there. Thank you.
Screenshot 2024-03-19 at 21.03.34.png
On Sunday, March 17, 2024 at
8:09:30 PM UTC+1 Sidney wrote:
Hi, I would love to switch from
Cumulus MX template to weewx. How
can I become a tester to get the
latest installation files please?
Thank you. Sidney
--
You received this message because you are
subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/559472bb-05d0-419b-a38e-0a6d2331596dn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/559472bb-05d0-419b-a38e-0a6d2331596dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to
the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to
weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/75cbe7d3-f1e3-438a-b482-ec508129ac82n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/75cbe7d3-f1e3-438a-b482-ec508129ac82n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/17189c0b-485e-4b71-a001-a43af223e3b8n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/17189c0b-485e-4b71-a001-a43af223e3b8n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/b6c1acda-fa61-4170-9b92-eba5fdea1fcfn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/b6c1acda-fa61-4170-9b92-eba5fdea1fcfn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/f8f0406c-cda0-4838-b605-13ca39a52dec%40gmail.com.
