Normally, if all the rules are followed, weewx reading data from a
WH2910 console via interceptor driver is straightforward.
But who knows how you have configured your console and weewx.
Therefore the weewx.conf and customized server entry screenshot is needed.
Apart from that, I recommend to upgrade your WS3500 WiFi firmware to the
latest version 1.6.7 - version 1.5.2 is stone-age.
When you click on the device list entry in the WS View Plus app, a
firmware upgrade should be offered.
On 19.03.2024 21:33, Stefano wrote:
Hi,
Let me have a look tomorrow evening so in approx 24h I hope...
It is a Sainlogic WS3500 👍.
Thank you for your help.
On Tue, Mar 19, 2024, 21:23 'Rainer Lang' via weewx-user
<weewx-user@googlegroups.com> wrote:
can you post your weewx.conf entries of the [Interceptor] stanza ?
Also a screecopy of your WS View Plus customized server entries
would be helpful.
I have just run out of my crystal balls ...
And a WS3500 is what ? A Sainlogic WS3500, an Ecowitt WH2910 clone ?
The more precise you are in your statements, the better we can
understand your point.
On 19.03.2024 21:17, Stefano wrote:
Hello,
Anybody facing something similar ? I'm only getting "unrecognized
parameter b'mac: xxxxxxxxxxxx'" and "unrecognized parameter
fields=timezone,utc_offset,dst,date_sunrise,date_sunset'",
"ignored parameter stationtype=EasyWeatherV1.5.2".
Thank you for your help.
On Tue, Mar 12, 2024 at 10:33 PM silverstone777
<stefano1...@gmail.com> wrote:
I struggled a bit with the initial setup, but I finally
managed to get a custom Docker/Podman image running
(https://github.com/felddy/weewx-docker/ did NOT work for me).
After all of the struggle, I am now at a point where I am
getting *some* data, but *none* of the actual useful stuff. I
am only getting Station Name and Time/Data, but no actual
sensor data.
Basically what I'm getting is limited to this
Mar 12 20:47:25 weewx[4] DEBUG user.interceptor: POST:
b'mac=E8:DB:84:E4:92:6C&stationtype=EasyWeatherV1.5.2&fields=timezone,utc_offset,dst,date_sunrise,date_sunset'
Mar 12 20:47:25 weewx[4] DEBUG user.interceptor: raw data:
b'mac=E8:DB:84:E4:92:6C&stationtype=EasyWeatherV1.5.2&fields=timezone,utc_offset,dst,date_sunrise,date_sunset'
Mar 12 20:47:25 weewx[4] INFO user.interceptor: unrecognized
parameter b'mac=E8:DB:84:E4:92:6C
Mar 12 20:47:25 weewx[4] DEBUG user.interceptor: ignored
parameter stationtype=EasyWeatherV1.5.2
Mar 12 20:47:25 weewx[4] INFO user.interceptor: unrecognized
parameter
fields=timezone,utc_offset,dst,date_sunrise,date_sunset'
Mar 12 20:47:25 weewx[4] DEBUG user.interceptor: raw packet:
{'dateTime': 1710276445, 'usUnits': 1}
Mar 12 20:47:25 weewx[4] DEBUG user.interceptor: mapped
packet: {'dateTime': 1710276445, 'usUnits': 1}
Some of the error messages are generated while I tried to
access the built-in webserver, although the webpage always
returns:
{"errcode":"0","errmsg":"ok","UTC_offset":"-18000"}
Is this a known issue or lack of configuration ?
weewx version 4.10.2
In the WSView Plus app I setup the System to use Ecowitt
Custom Protocol, my Server IP Address as well as the Port
8080. I am NOT sure however if the PATH is correct (I left
the default value). Should I have removed everything and left
the PATH blank in the WSView Plus app ?
Thank you for your help :).
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/407d41da-fa7f-4b74-8561-86d280bfb875n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/407d41da-fa7f-4b74-8561-86d280bfb875n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CANhf2e7h9Yo%3D1EUYt8Tp8NY8a_igrrGcbcqoXsY2j1yWy6tKuQ%40mail.gmail.com
<https://groups.google.com/d/msgid/weewx-user/CANhf2e7h9Yo%3D1EUYt8Tp8NY8a_igrrGcbcqoXsY2j1yWy6tKuQ%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/24bc7c63-e5f1-4d1b-92bb-d9c1e1a079db%40gmail.com
<https://groups.google.com/d/msgid/weewx-user/24bc7c63-e5f1-4d1b-92bb-d9c1e1a079db%40gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CANhf2e5ph7suUQtbjgVQXgDYA9Yfqe8X7ecQgP8Td1NC7x4-bA%40mail.gmail.com
<https://groups.google.com/d/msgid/weewx-user/CANhf2e5ph7suUQtbjgVQXgDYA9Yfqe8X7ecQgP8Td1NC7x4-bA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/334d9041-c29e-40ec-bd5f-75aa42b9aa44%40gmail.com.
