the VDR community.
Disclaimer:
The VDR User Counter is an attempt to find out how many people are actually
using VDR, so please register only if you are actually using VDR!
Note that there is absolutely no obligation to register yourself in order to
use VDR. VDR is free, open source software,
On Thu, 21 Sep 2023 08:28:51 +0200
Torsten Duwe wrote:
> On Wed, 20 Sep 2023 10:09:29 +0200
> Harald Milz wrote:
>
> > In fact I tried to boot satip-axe from a USB stick but for unknown
> > reasons the box stuck to the original FW. :-(
>
> You must not partition the medium, but use it in "USB
On Wed, 20 Sep 2023 10:09:29 +0200
Harald Milz wrote:
> In fact I tried to boot satip-axe from a USB stick but for unknown
> reasons the box stuck to the original FW. :-(
You must not partition the medium, but use it in "USB floppy disk mode".
Put a fat32 on it, with idl4k.scr in the root dir,
Hi Torsten,
long time no hear! Good you're still around!
On Tue, Sep 19, 2023 at 10:43:01AM +0200, Torsten Duwe wrote:
> There is an alternative firmware for this box
In fact I tried to boot satip-axe from a USB stick but for unknown reasons the
box stuck to the original FW. :-(
After diggin
Hi Harald!
On Sun, 17 Sep 2023 19:49:39 +0200
Harald Milz wrote:
> Hi all,
>
> I recently got a stone-aged Digibit R1 to replace an even older PCI-E card.
[...]
There is an alternative firmware for this box
https://github.com/perexg/satip-axe/blob/master/dist/README
https://github.com/Jalle19
Hi all,
I recently got a stone-aged Digibit R1 to replace an even older PCI-E card. My
satellite antenna points at Astra S19.2E and Hotbird S13E, 2 Dual LNBs in Quad
configuration. However, the Digibit device seems not to find anything on S13E.
Not sure if I need DiSeQC with SATIP but I set:
in
On 28/11/2022 18:17, Marko Mäkelä wrote:
Mon, Nov 28, 2022 at 12:27:08PM +, Richard F wrote:
FYI I'm using the powersaving patch on a system with an Astrometa USB
stick + an old Winfast PCI receiver, and I see 2-3W reduction when
the Astrometa frontend is shut down:
I only tested with a s
Mon, Nov 28, 2022 at 12:27:08PM +, Richard F wrote:
FYI I'm using the powersaving patch on a system with an Astrometa USB
stick + an old Winfast PCI receiver, and I see 2-3W reduction when the
Astrometa frontend is shut down:
I only tested with a single receiver. Your patch may very well s
I conducted this test without applying the patch
https://github.com/glenvt18/vdr/commit/b368f67d00d0b466ae36028efb9336e81f77dba8
As far as I can tell, even with that patch the EPG parser could keep
running, because the patch does not set the variable InhibitEpgScan.
That would explain why
Sun, Oct 17, 2021 at 10:52:11PM +0300, Marko Mäkelä wrote:
I noticed that VDR is consuming about 5% of the CPU power according to
"top". Could it not be made more event-based? It might be interesting
to check with "powertop" how many wakeups per second there are, and
with "perf record" and "per
Thank you Klaus for the new 2.6 version!
What is currently the best ( most updated? ) plugin to use with vdpau or cuvid.
Trying to install vdr on an unused vivobook with NVIDIA Corporation GP108M
[GeForce MX150]
Josce
___
vdr mailing list
vdr@lin
Many thanks to Klaus for version 2.6.0!
For the state of the Debian packages see:
https://qa.debian.org/developer.php?email=pkg-vdr-dvb-devel%40lists.alioth.debian.org
Besides this I have in my private repository:
deb https://packages.e-tobi.net/vdr-experimental bullseye base
vdr-multipatch add
Sat, Jan 01, 2022 at 06:44:52PM +0100, Narcis Garcia wrote:
As Far As I Know w-scan2 is needed to tune DVB-T2
https://github.com/stefantalpalaru/w_scan2/
Another DVB-T2 compatible solution (which also supports DVB-T) is
t2scan.
This is how I built and invoked it on my Raspberry Pi 2 (using
ist
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______
vdr mailing list
vdr@linuxtv.org
https://www.li
Wed, Dec 29, 2021 at 04:56:54PM +0200, René wrote:
Klaus just released 2.6.0. Any chance if we could get that version too?
:-)
For me, git://projects.vdr-developer.org/vdr-plugin-rpihddevice.git
would be a must-have feature.
Today I made an attempt of installing Debian Sid from the scratch o
Hi,
* Tobi [2021-12-06 22:45]:
> To my shame, I have rather neglected the maintenance of the VDR and VDR
> plugin packages for Debian and e-tobi.net over the last 2 years.
> I am in the process of catching up. However, I would like to get rid of
> some plugins where nothing is happening upstream
Heroic work - thanks, and Merry Xmas
Richard
On 22/12/2021 12:00, vdr-requ...@linuxtv.org wrote:
Today's Topics:
1. Re: VDR packages in Debian and e-tobi.net (Tobi)
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/li
So far, I've updated the following packages in debian/sid, which soon will
migrate to debian/testing:
∙ vdr 2.4.7
∙ vdr-plugin-dvd 0.3.6~b03+git20211216
∙ vdr-plugin-dvbhddevice 2.2.0
∙ vdr-plugin-dvbsddevice 2.2.0
∙ vdr-plugin-epgsearch 2.4.1
∙ vdr-plugin-epgsync 1.0.1
∙ vdr-plugin-femon 2.4.0
∙
On 13.12.21 00:28, Tobi wrote:
I hope to have at least have the top 20 plugin packages updated by the end
of the year.
If you need help with any of my old plugins or patches, let me know.
Cheers,
Udo
___
vdr mailing list
vdr@linuxtv.org
https://ww
Thanks for your suggesstions!
I hope to have at least have the top 20 plugin packages updated by the end
of the year.
Packages will be updated in debian/unstable first.
BR,
Tobias
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/m
> I am in the process of catching up.
That sounds great.
> Which plugins do you consider indispensable and would like to see them
> continue in the official Debian and/or e-tobi.net Debian repositories?
I'd really like to see undelete again
(Or any other plugin with that functionality)
Thank you
ever, I would like to get rid
>> > of
>> > some plugins where nothing is happening upstream anymore.
>> > Which plugins do you consider indispensable and would like to see
>> > them
>> > continue in the official Debian and/or e-tobi.net Debian
>> &g
ould like to see
> > them
> > continue in the official Debian and/or e-tobi.net Debian
> > repositories?
> >
> > BR,
> >
> > Tobias
> >
> > _______
> > vdr mailing list
> > vdr@linuxtv.org
> > https://www.linuxtv
list
> vdr@linuxtv.org
> https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi Tobi,
I'm using
vdr
vdr-plugin-epgsearch
vdr-plugin-extrecmenung (from https://gitlab.com/kamel5/extrecmenung)
vdr-plugin-femon
vdr-plugin-live
vdr-plugin-osdteletext
vdr-plugin-streamdev-server
vdr-plugin-xineliboutput (from deb-multimedia.org)
vdradmin-am
on my vdr running as hea
ial Debian and/or e-tobi.net Debian repositories?
BR,
Tobias
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______
vdr mailing list
vdr@linuxtv.org
https://www.linux
Hello Tobi,
I use the following plugins on my Debian based VDR systems:
vdr-plugin-epgsearch
vdr-plugin-extrecmenu
vdr-plugin-graphlcd
vdr-plugin-markad-ng
vdr-plugin-menuorg
vdr-plugin-skinflatplus
vdr-plugin-xineliboutput
vdr-plugin-streamdev-*
Thanks for maintaining the packages!
Be
Hi!
To my shame, I have rather neglected the maintenance of the VDR and VDR
plugin packages for Debian and e-tobi.net over the last 2 years.
I am in the process of catching up. However, I would like to get rid of
some plugins where nothing is happening upstream anymore.
Which plugins do you consid
__
I'm using this dedicated address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should fix this against automated addresses collectors.
El 29/11/20 a les 14:11, Helmut Binder ha escrit:
>> $ ls -la /dev/dvb/adapter0/
>> total 0
El 29/11/20 a les 22:13, Helmut Binder ha escrit:
>
> Can you receive any DVB-T2 Channels ? These would use frontend 0/1 with the
> CXD2837ER demodulator and you could compare the tuning.
> If not, rename frontend1 to frontend0, similar as in Timo's proposal:
>
> - stop vdr
> > mv /dev/dvb/adap
;>>>> I've installed vdr from Raspbian packages, to use it with Kodi.
>>>>>>>> I've updated channels.conf by using w_scan2 for a DVB-T2 dongle. TV
>>>>>>>> channels are found.
>>>>>>>>
>>>>&
I cloned it and built it from that source on OpenSuSe 15.2, no problem
(well quite a few warnings...!)
On 1/12/2020 7:50 am, Narcis Garcia wrote:
> The project sources repository (sadly in a proprietary platform):
>
> https://github.com/stefantalpalaru/w_scan2
>
>
> Narcis Garcia
>
> El 30/11/20 a
gt;>>>>>
>>>>>>> I've installed vdr from Raspbian packages, to use it with Kodi.
>>>>>>> I've updated channels.conf by using w_scan2 for a DVB-T2 dongle. TV
>>>>>>> channels are found.
>>>>>>>
Thanks by the way for the heads-up on w_scan2 - the fork of w_scan I
didn't know about. As an external tool, that now tunes DVB-T2 HD
channels for me at last - the only thing outside VDR itself that works
so far :-)
Richard
On 29/11/2020 2:16 pm, Timo Helkiö wrote:
> Timo Helkiö kirjoitti 29.11
gt;>>>
>>>>
>>>> Helmut
>>
>> I've done this like a backport from next Raspbian version:
>>
>> $ sudo apt -t bullseye install vdr
>>
>> /[installing new] gcc-10-base libcbor0 libcrypt-dev libcrypt1 libffi7
>> libfido
www.vdr-portal.de/forum/index.php?thread/132190-patch-f%C3%BCr-multi-frontend-devices/&postID=1308966#post1308966
> >>
> >>
> >> Helmut
>
> I've done this like a backport from next Raspbian version:
>
> $ sudo apt -t bullseye install vdr
>
> /
installing new] gcc-10-base libcbor0 libcrypt-dev libcrypt1 libffi7
libfido2-1 libgcc-s1 libnsl-dev libnsl2 libnss-nis libnss-nisplus
libreadline8 libtirpc-dev runit-helper/
/[upgrading] libc-bin libc-dev-bin libc-l10n libc6 libc6-dbg libc6-dev
libpython3.7 libpython3.7-dev libpython3.7-minimal
oot video 212, 3 de nov. 28 15:57 frontend0
>>> crw-rw+ 1 root video 212, 19 de nov. 28 15:57 frontend1
>>> crw-rw+ 1 root video 212, 7 de nov. 28 15:57 net0
>>>
>>
>> This is a multi-frontend device. You need VDR-2.4.1 or newer - or at
>>
El 29/11/20 a les 14:16, André Weidemann ha escrit:
>
>
> On 29.11.2020 11:33, Narcis Garcia wrote:
>> de nov. 29 11:29:53 raspberrypi vdr[11391]: [11391] ERROR
>> (dvbdevice.c,1650): /dev/dvb/adapter0/frontend1: El dispositiu o recurs
>> es troba ocupat
>
> Looks like the dvb-adapter is already in
El 29/11/20 a les 11:44, Klaus Schmidinger ha escrit:
> On 29.11.20 11:33, Narcis Garcia wrote:
>> ...
>> de nov. 29 11:29:53 raspberrypi vdr[11391]: [11391] ERROR
>> (dvbdevice.c,1650): /dev/dvb/adapter0/frontend1: El dispositiu o
>> recurs es troba ocupat
>
> If this error message was given in E
El 29/11/20 a les 9:42, Narcis Garcia ha escrit:
> El 28/11/20 a les 23:01, Klaus Schmidinger ha escrit:
>> On 28.11.20 17:55, Narcis Garcia wrote:
>>> ...
>>> de nov. 28 17:33:12 raspberrypi vdr[30508]: [30514] frontend 0/0 lost
>>> lock on channel 23 (Telecinco), tp 586
>>> de nov. 28 17:33:13 ra
i+ vdradmi+ vdradmind
pi pi grep --color=auto -ie vdr
vdr vdr /usr/bin/vdr
$ groups vdr
vdr : vdr video
I'm trying now with vdr-plugin-live : Same unsuccess result.
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org
ou need VDR-2.4.1 or newer - or at least this
patch from here:
https://www.vdr-portal.de/forum/index.php?thread/132190-patch-f%C3%BCr-multi-frontend-devices/&postID=1308966#post1308966
Helmut
$ ps -A -o user,group,cmd | grep -ie vdr
vdradmi+ vdradmi+ vdradmind
pi pi grep --color=a
read/132190-patch-f%C3%BCr-multi-frontend-devices/&postID=1308966#post1308966
Helmut
> $ ps -A -o user,group,cmd | grep -ie vdr
> vdradmi+ vdradmi+ vdradmind
> pi pi grep --color=auto -ie vdr
> vdr vdr /usr/bin/vdr
>
> $ groups vdr
> vdr : vdr video
El 28/11/20 a les 23:01, Klaus Schmidinger ha escrit:
> On 28.11.20 17:55, Narcis Garcia wrote:
>> ...
>> de nov. 28 17:33:12 raspberrypi vdr[30508]: [30514] frontend 0/0 lost
>> lock on channel 23 (Telecinco), tp 586
>> de nov. 28 17:33:13 raspberrypi vdr[30508]: [30514] frontend 0/0
>> regained l
On 29.11.20 11:33, Narcis Garcia wrote:
...
de nov. 29 11:29:53 raspberrypi vdr[11391]: [11391] ERROR (dvbdevice.c,1650):
/dev/dvb/adapter0/frontend1: El dispositiu o recurs es troba ocupat
If this error message was given in English I might be able to interpret it.
Klaus
On 28.11.20 17:55, Narcis Garcia wrote:
...
de nov. 28 17:33:12 raspberrypi vdr[30508]: [30514] frontend 0/0 lost
lock on channel 23 (Telecinco), tp 586
de nov. 28 17:33:13 raspberrypi vdr[30508]: [30514] frontend 0/0
regained lock on channel 23 (Telecinco), tp 586
Maybe a bad cable/connector?
w+ 1 root video 212, 19 de nov. 28 15:57 frontend1
> crw-rw+ 1 root video 212, 7 de nov. 28 15:57 net0
>
> $ ps -A -o user,group,cmd | grep -ie vdr
> vdradmi+ vdradmi+ vdradmind
> pi pi grep --color=auto -ie vdr
> vdr vdr /usr/bin/vdr
>
> $ group
15:57 demux0
crw-rw+ 1 root video 212, 5 de nov. 28 15:57 dvr0
crw-rw+ 1 root video 212, 3 de nov. 28 15:57 frontend0
crw-rw+ 1 root video 212, 19 de nov. 28 15:57 frontend1
crw-rw+ 1 root video 212, 7 de nov. 28 15:57 net0
$ ps -A -o user,group,cmd | grep -ie vdr
vdradmi+ vd
Hello,
I've installed vdr from Raspbian packages, to use it with Kodi.
I've updated channels.conf by using w_scan2 for a DVB-T2 dongle. TV
channels are found.
But I try to watch some channel and I get no data.
Tried with two clients Kodi software with its VDR plugin (screen
interface) and with vd
On 28.11.20 17:30, Narcis Garcia wrote:
Hello,
I've installed vdr from Raspbian packages, to use it with Kodi.
I've updated channels.conf by using w_scan2 for a DVB-T2 dongle. TV
channels are found.
But I try to watch some channel and I get no data.
Does the user id under which you run VDR ha
On 22.11.20 13:42, Richard F wrote:
...
I'll see if I can rebuild with latest. I already can't rebuild a couple of
plugins on SuSe 15.2/gcc 7 (bug logged for smartvweb a long time back), I'm
concerned more things might break, which is why I'm still on 2.20. But I'll try.
You don't need any p
On 21/11/2020 4:24 pm, Klaus Schmidinger wrote:
On 21.11.20 17:11, Richard F wrote:
Klaus - thanks for your reply. 2 problems - the first is my own -
I don't like all the rubbish shopping channels filling up my channel
list and I sort it manually to keep the channels in a sensible order
ins
______
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
___
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Klaus - thanks for your reply. 2 problems - the first is my own - I
don't like all the rubbish shopping channels filling up my channel list
and I sort it manually to keep the channels in a sensible order instead
of the random order the broadcasters have ended up with - so I have the
'updatec
I have several DVB-T2 channels in my list, for instance:
Das Erste
HD;BR:554000:B8D0G19128M2P0Q111S1T16X0Y0:T:27500:4113=36:4114=deu@17,4115=mis@17:4116:0:769:8468:12291:0
arte
HD;BR:554000:B8D0G19128M2P0Q111S1T16X0Y0:T:27500:4129=36:4130=deu@17,4131=fra@17,4132=mis@17,4133=mul@17:4134:0:770:84
I'm using DVB-T2 with a PC-TV 290E USB nanostick in UK. I'm also still
on V2.20.
My notes on tuning confirm that "... this (setting VDR to find new
transponders) doesn't seem to be able to config HD channels - can check
TS-ID, ON-ID Srv-ID with Sony TV"
Basically I have to hand-edit the para
Hello and thx for this great VDR software.
Could someone help me at the start as I cannot get dvb-t2 channels
visible in VDR?
If I add HD channels manually in channels.conf then VDR mark those as
OBSOLETE. Yesterday I even clean my channels.conf totally and just left
one channel on it and put
eeds to be local recording, be able to
> use local guide data and when needed setup blind recordings as done on
> VCRs, and would be nice if you could plug and remove USB drives/sticks
> for longer term storing recordings. From what I've seen, these ready
> made systems don't
My mom (82 years old) is still using a VCR with a tuner box. We are
concerned about it wearing out, the tapes no longer being sold, etc..
She just spent $65 on a 9 pack of tapes from Amazon that could have gone
to a new setup and she is saying she wants to get another VCR for
backup. But they h
Hello,
On my vdr-box, I cannot watch some channels. For example when switching
to France 2, the image stutters and then freezes after some seconds. And
the audio output stops too.
I have 2 outputs with some messages:
1.) From stdout/stderr (only some samples, because there are a lot of lines):
Hi all,
On Thu, Apr 30, 2020 at 05:46:44PM +0200, Harald Milz wrote:
> Möglicherweise habe ich verpasst, weil ich sehr lange nicht danach geschaut
> habe, dass sich an den diesbezüglichen Configs von vdr-2.2.0 nach -2.4.0 was
> geändert hat.
[Background: since my upgrade from 2.2.0 to yavdr-2.4.
On 30.04.20 17:46, Harald Milz wrote:
Nach längerem habe ich mich endlich aufgerafft,
Wenn man plötzlich Zeit hat, und never-touch-a-running-system neu
aufsetzt... woher kenn ich das? ^^
Ich hätte erwartet, dass er dafür frontend 2/0 oder 3/0 verwendet. Auf denen
wirft er aber ständig Timeout
immer
prima funktioniert hat.
Aber jetzt nicht mehr: Kanäle auf Astra werden ohne weiteres gefunden, aber
der VDR versucht nun S13E-Kanäle mit Tuner 1 oder 2 zu finden, was natürlich
scheitert:
Apr 30 17:41:47 vdr vdr: [16550] switching to channel 1 S19.2E-1-1019-10301
(Das Erste HD)
Apr 30 17
Hello,
I continue to buid my new vdrbox :
Mint 19.3 / Desktop Cinnamon 3840x2160 @ 60 Hz / intel gpu / vaapi
plugin / vdr-2.4.1
Driver seems to be OK :
vainfo
libva info: VA-API version 1.1.0
libva info: va_getDriverName() returns 0
libva info: Trying to open
/usr/lib/x86_64-
Hi
My vdr recordings are stored on an openmediavault server. The vdr box
(rpi 2) is given access to them by nfs.
# df -ah /mnt/mmcblk0p3/tv
FilesystemSize Used Available Use% Mounted on
192.168.0.40:/export/vdrrecords
3.6T 1.2T 2.5T 32
eid0
vnsiserver
vdrmanager
dummydevice
smarttvweb
+ vdradmin-AM, VDR-zapper, xmltv2vdr
Thanks for any feedback
On 3/06/2019 13:00, vdr-requ...@linuxtv.org wrote:
> Subject:
> Re: [vdr] VDR 2.20 skincurses build error GCC7
> From:
> Klaus Schmidinger
> Date:
> 3/06/2019, 09:36
&
On 03.06.19 10:30, Richard F wrote:
Hi,
I'm not sure how relevant the skincurses plugin is, but I can no longer
build it under GCC7 (Opensuse 15.1)
Please try this patch:
http://ftp.tvdr.de/Developer/Patches/vdr-2.4/vdr-2.4.0-15-fix-skincurses.diff
Klaus
__
Hi,
I'm not sure how relevant the skincurses plugin is, but I can no longer
build it under GCC7 (Opensuse 15.1)
skincurses.c:133:52: error: invalid use of incomplete type ?WINDOW {aka
struct _win_st}?
copywin(savedRegion, window, 0, 0, savedRegion->_begy,
savedRegion->_begx, savedRegion->_m
vdr-convert is a tool to accurately transcode VDR1.x and VDR2.x
recordings, including all valid streams - video, audio (including
AC3/DTS 5.1), Audio Description (AD), and DVB subtitles - into more
compressed and accessible formats, while maintaining perceived quality
with good compatibility.
See
VDR User kirjoitti 2018-10-31 16:07:
Intel/VAAPI has been very smooth &
stable here. Not a single problem and no bugs that I've experienced.
As you have working system, could you also list HW what you use and
related SW's with version inffo's? This way we can go forward with this
question a
> you can have a look at the nvidia gt 1030 cards. there are lowprofile and
> fanless versions,
> but pay attention to card size.
> and you may need to install correct drivers manually.
> but, half the price then an intel nuc with luck.
If all you need is a video card, that's a decent option. If
On 31/10/2018 11:50, master.of.brainless.thi...@gmx.net wrote:
> you can have a look at the nvidia gt 1030 cards. there are lowprofile
> and fanless versions,
> but pay attention to card size. and you may need to install correct
> drivers manually. but, half the price then an intel nuc with luck. i
Am Tue, 30 Oct 2018 12:00:01 +
schrieb vdr-requ...@linuxtv.org:
> > I plan to upgrade my VDR box, with these two important features :
> > - reading mkv files => I am using xineliboutput and vdpau.
>
> MKV is just a container for data streams and support is wide-spread.
> Any half-decent pla
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
rking
perfectly deployed as a docker container:
https://registry.hub.docker.com/u/chrodriguez/vdr
Thanks for this wonderfull project!
--
Lic. Christian A. Rodriguez
@car_unlp
___
vdr mailing list
vdr@linuxtv.
/vdr-convert is a tool to accurately transcode VDR1.x and VDR2.x TV
recordings, including all valid streams - video, audio (including
AC3/DTS 5.1), Audio Description (AD), and DVB subtitles - into more
compressed and accessible formats, while maintaining perceived quality
with good compatibility. /
Hi,
i lost my password for vdr portal, but i can't reset it because captcha
doesn't work anymore.
If someone who can login to vdr-protal would be so kind to inform the
site admin about it.
kind regards
gerald
___
vdr mailing list
vdr@linuxtv.org
https:
VDR version 2.3.9 is about to be released as stable 2.4.0 on April 15!
The archive can be found here:
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.3.9.tar.bz2
(this is still the same as in my announcement dated March 18).
I have posted a few last minute fixes at
https://www.vdr-portal.de/forum/in
Am Montag, den 02.04.2018, 18:40 +0200 schrieb Klaus Schmidinger:
> On 02.04.2018 14:20, Oliver Endriss wrote:
> > Am Montag, den 02.04.2018, 12:28 +0200 schrieb Klaus Schmidinger:
> >> On 01.04.2018 19:01, Oliver Endriss wrote:
> >> > ...
> >> >> >> >> Does it make a difference whether the progres
On 02.04.2018 14:22, Torgeir Veimo wrote:
Do you have any plans for more integrated means of running a client server
setup like the streamdev setup? I like the raspberry pi since it's low power,
and does hdmi-cec, but without sata I'm concerned with disk bandwidth with
multiple recordings.
T
On 02.04.2018 14:20, Oliver Endriss wrote:
Am Montag, den 02.04.2018, 12:28 +0200 schrieb Klaus Schmidinger:
On 01.04.2018 19:01, Oliver Endriss wrote:
> ...
>> >> >> Does it make a difference whether the progress display is active or not
>> >> >> when you set the mark?
>> >
>> > If the progres
Do you have any plans for more integrated means of running a client server
setup like the streamdev setup? I like the raspberry pi since it's low
power, and does hdmi-cec, but without sata I'm concerned with disk
bandwidth with multiple recordings.
On 2 April 2018 at 21:27, Klaus Schmidinger
wrot
Am Montag, den 02.04.2018, 12:28 +0200 schrieb Klaus Schmidinger:
> On 01.04.2018 19:01, Oliver Endriss wrote:
> > ...
> >> >> >> Does it make a difference whether the progress display is active or
> >> >> >> not
> >> >> >> when you set the mark?
> >> >
> >> > If the progress bar is off, and you
On 02.04.2018 12:35, Torgeir Veimo wrote:
Am Samstag, den 24.03.2018, 15:05 +0100 schrieb Klaus Schmidinger:
At the time this was done, I was still using the TT S2-6400 as output device.
Jut curious, what are you using now? A raspberry pi?
Currently a Raspberry Pi, but I'm planning to use m
Am Samstag, den 24.03.2018, 15:05 +0100 schrieb Klaus Schmidinger:
> At the time this was done, I was still using the TT S2-6400 as output
device.
Jut curious, what are you using now? A raspberry pi?
--
-Tor
___
vdr mailing list
vdr@linuxtv.org
https:
On 01.04.2018 19:01, Oliver Endriss wrote:
...
>> >> Does it make a difference whether the progress display is active or not
>> >> when you set the mark?
>
> If the progress bar is off, and you set a mark, progress bar and
> mark show up immediately. -> No problem.
...
> Could it be that this
Am Samstag, den 24.03.2018, 15:05 +0100 schrieb Klaus Schmidinger:
> On 19.03.2018 18:01, Oliver Endriss wrote:
> > Am Montag, den 19.03.2018, 14:45 +0100 schrieb Klaus Schmidinger:
> >> On 19.03.2018 01:33, Oliver Endriss wrote:
> >> > Am Sonntag, den 18.03.2018, 23:29 +0100 schrieb Klaus Schmidin
On 19.03.2018 18:01, Oliver Endriss wrote:
Am Montag, den 19.03.2018, 14:45 +0100 schrieb Klaus Schmidinger:
On 19.03.2018 01:33, Oliver Endriss wrote:
> Am Sonntag, den 18.03.2018, 23:29 +0100 schrieb Klaus Schmidinger:
>> On 18.03.2018 20:39, Oliver Endriss wrote:
>> > Am Sonntag, den 18.03.20
Am Montag, den 19.03.2018, 14:45 +0100 schrieb Klaus Schmidinger:
> On 19.03.2018 01:33, Oliver Endriss wrote:
> > Am Sonntag, den 18.03.2018, 23:29 +0100 schrieb Klaus Schmidinger:
> >> On 18.03.2018 20:39, Oliver Endriss wrote:
> >> > Am Sonntag, den 18.03.2018, 19:15 +0100 schrieb Klaus Schmidin
On 19.03.2018 01:33, Oliver Endriss wrote:
Am Sonntag, den 18.03.2018, 23:29 +0100 schrieb Klaus Schmidinger:
On 18.03.2018 20:39, Oliver Endriss wrote:
> Am Sonntag, den 18.03.2018, 19:15 +0100 schrieb Klaus Schmidinger:
>> On 18.03.2018 18:55, Oliver Endriss wrote:
>> > Hi,
>> >
>> > just ins
Am Sonntag, den 18.03.2018, 23:29 +0100 schrieb Klaus Schmidinger:
> On 18.03.2018 20:39, Oliver Endriss wrote:
> > Am Sonntag, den 18.03.2018, 19:15 +0100 schrieb Klaus Schmidinger:
> >> On 18.03.2018 18:55, Oliver Endriss wrote:
> >> > Hi,
> >> >
> >> > just installed vdr 2.3.9 and noticed that
On 18.03.2018 20:39, Oliver Endriss wrote:
Am Sonntag, den 18.03.2018, 19:15 +0100 schrieb Klaus Schmidinger:
On 18.03.2018 18:55, Oliver Endriss wrote:
> Hi,
>
> just installed vdr 2.3.9 and noticed that there is a delay
> when I try to set a recording mark, compared with vdr 2.2.0.
>
> Step
Am Sonntag, den 18.03.2018, 19:15 +0100 schrieb Klaus Schmidinger:
> On 18.03.2018 18:55, Oliver Endriss wrote:
> > Hi,
> >
> > just installed vdr 2.3.9 and noticed that there is a delay
> > when I try to set a recording mark, compared with vdr 2.2.0.
> >
> > Steps to reproduce:
> > - Play a reco
On 18.03.2018 18:55, Oliver Endriss wrote:
Hi,
just installed vdr 2.3.9 and noticed that there is a delay
when I try to set a recording mark, compared with vdr 2.2.0.
Steps to reproduce:
- Play a recording.
- Press ok to display the progress bar.
- Press 0 to set a mark.
There is a notable del
Hi,
just installed vdr 2.3.9 and noticed that there is a delay
when I try to set a recording mark, compared with vdr 2.2.0.
Steps to reproduce:
- Play a recording.
- Press ok to display the progress bar.
- Press 0 to set a mark.
There is a notable delay between the keypress
and the mark showing
2018-01-21 15:46 GMT+02:00 Klaus Schmidinger :
> As long as a cPlayer (or a cReceiver, for that matter) is attached to
> a cDevice, VDR will not perform its housekeeping tasks. This is to
> avoid any problems during replay or recording, possibly caused by
> heavy disk access.
Ah, I see.. I think s
On 19.01.2018 18:48, Teemu Suikki wrote:
I'm starting to think that maybe my problem IS caused entirely by this
softhddevice bug. Because my softhddevice keep freezing quite
frequently, I have added a shutdown command that detaches softhddevice
and leaves vdr running. And then when I watch someth
I remember
right, housekeeping tasks are not handled (by design) when you have a
player open.
I think I had to work around similar issues when I wrote suspendoutput
plugin. It was quite a while ago (2005-09-20: Added vdr idle actions)
so I don't remember all the details anymore ...
Any
I'm starting to think that maybe my problem IS caused entirely by this
softhddevice bug. Because my softhddevice keep freezing quite
frequently, I have added a shutdown command that detaches softhddevice
and leaves vdr running. And then when I watch something, I'm pressing
buttons and using menus a
1 - 100 of 2977 matches
Mail list logo
