What I did was to set up an Ethernet connection and use winSCP for file
transfer.
https://files.ettus.com/manual/page_usrp_e3x0.html - setting up ethernet
https://winscp.net/eng/index.php - winSCP
-Mike
On Tue, Aug 1, 2017 at 2:31 PM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via U
USRPs can do Tx and Rx at the same time. I did an experiment where I
modified the FPGA image of Node 2 to send the Rx samples directly to Tx on
a different freq., and measured the phase difference of the echo from Node
2 at Node 1. I didn't measure the phase difference of the carrier, rather
the
I've build and installed UHD 3.10.1.1 on a Tegra TX2 (ARM64 platform). The
USB 3.0 is working, but I'm getting errors with the USB 2.0 on a USRP B200.
uhd_find_devices works, but uhd_usrp_probe, and the uhd application
examples give the error below. Note that I've tried running with sudo, and
ha
ration, once I get
things working I may ask you more about it.
-Mike
On Tue, Dec 19, 2017 at 7:58 PM, Philip Balister via USRP-users <
usrp-users@lists.ettus.com> wrote:
> On 12/19/2017 06:44 PM, Marcus D. Leech via USRP-users wrote:
> > On 12/19/2017 05:09 PM, Michael Don via US
t;
>> On 12/19/2017 06:44 PM, Marcus D. Leech via USRP-users wrote:
>> > On 12/19/2017 05:09 PM, Michael Don via USRP-users wrote:
>> >>
>> >> I've build and installed UHD 3.10.1.1 on a Tegra TX2 (ARM64
>> >> platform). The USB 3.0 is wor
an see which system call returns -EPERM. Yes this is a
> hail mary operation.
>
> Philip
>
> On 12/28/2017 01:13 PM, Michael Don via USRP-users wrote:
> > I'm still getting the same error with the USB 2.0 for the B200 on my
> tegra
> > system.
> >
> > Us
I'm pretty sure you can't break the loader by changing the FPGA image. The
cypress IC handles the loading. I've played around with the FPGA image a
lot, including some broken images, and never had a problem loading a new
image.
On Mon, Aug 27, 2018 at 4:38 PM Javier Coronel (Expo Impex, S.L.) vi
I think the answers are yes and yes.
On Wed, Nov 14, 2018 at 6:46 AM Leandro EchevarrÃa via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hey folks,
>
> The Knowledge Base webpage for the SBXs daughterboards [1] mentions that
> their maximum output power is 100 mW (20 dBm), and that the trans
I have 2 E312 units. On one I have a gnuradio script that works fine.
I cloned the sd card from the first E312, and put it on the second
E12, and am getting the following error:
WARN: USRP Source Block caught rx error code: 1
Is this some sort of hardware problem, since the 2 systems have
identi
I have 2 E312 units. On one I have a gnuradio script that works fine.
I cloned the sd card from the first E312, and put it on the second
E12, and am getting the following error:
WARN: USRP Source Block caught rx error code: 1
Is this some sort of hardware problem, since the 2 systems have
identi
It looks like rx error code: 1 means UHD isn't getting samples from
the SDR. I thought it was some sort of error that the UHD sink was
configured wrong in gnuradio. I'm using a custom FPGA image that only
transmits samples on certain conditions. I discovered I had a bad
connector, so the second
11 matches
Mail list logo
