It looks like rx error code: 1 means UHD isn't getting samples from the SDR. I thought it was some sort of error that the UHD sink was configured wrong in gnuradio. I'm using a custom FPGA image that only transmits samples on certain conditions. I discovered I had a bad connector, so the second E312 wasn't working.
On 7/11/19, Michael Don <miked...@gmail.com> wrote: > I have 2 E312 units. On one I have a gnuradio script that works fine. > I cloned the sd card from the first E312, and put it on the second > E12, and am getting the following error: > > WARN: USRP Source Block caught rx error code: 1 > > Is this some sort of hardware problem, since the 2 systems have > identical software? Anyone know what rx error code: 1 means? Any > suggestions on how to fix this? > > Also, while playing around to try to fix this I'm pretty sure I set > the rx gain to 50 on one of the units, and got the "rx error code: 1" > error, and reduced the gain, and the error went away. On the unit > that is currently failing, I set the gain to 0 and still get the > error. The unit that's working has the gain set to 25. I thought the > max gain of the E312 was 76, not sure what's going on here. > > -Mike > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
