Hi Kunal,
How did you install UHD? is there a chance you've got conflicting uhd
installations, or updated parts of your system since you've built UHD yourself
(if you did that)?
Best regards,
Marcus
On 17 May 2018 17:08:43 GMT+02:00, kunal sankhe via USRP-users
wrote:
>Hi,
>
>I am trying to
Hi,
Where is the reference to the contents of the ‘gps_servo’ status message as
supported by CDA-2990? I would expect to be able to detect warm-up and perhaps
hold-over.
Kind Regards,
John
---
This email has been checked for viruses by Avast an
On 05/18/2018 06:46 PM, John Shields via USRP-users wrote:
Hi,
Where is the reference to the contents of the ‘gps_servo’ status
message as supported by CDA-2990? I would expect to be able to detect
warm-up and perhaps hold-over.
Kind Regards,
J
Thanks very much, as always, Marcus – this is what I was looking for.
Slainte,
John
From: Marcus D. Leech via USRP-users
Sent: Saturday, May 19, 2018 11:39 AM
To: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Octoclock-G gps_servo sentence
On 05/18/2018 06:46 PM,
Were you able to make any further progress building the B210 FPGA code on
Windows with Cygwin?
While it should be possible to build the FPGA under Windows, you should
probably try it under Ubuntu 16.04, which should just work out-of-the-box.
--Neel Pandeya
On 8 April 2018 at 21:17, Yeo Jin K
Yes, the E320 will have SMA connectors, not SMB connectors.
Please keep in mind that the E320 is not yet released, so this information
is subject to change, but realistically it will almost certainly have SMA
connectors.
--Neel Pandeya
On 9 April 2018 at 06:21, Martin via USRP-users
wrote:
Based on your error message, it looks like your Cygwin environment doesn't
have a Bash shell or Make installed. You'll need to go back to the Cygwin
installer and install these items. The link below might be helpful.
https://stackoverflow.com/questions/4828388/cygwin-make-bash-command-not-found
A
Hi All,
I have question related to two function in UHD. There is a function to
choose subdev (set_tx/rx_subdev_spec) and set antenna (set_tx/rx_antenna).
What is the difference between these two function? If i choose for example
subdev A:0, does it automatically select antenna in the RF A daughterb
