Hi Kunal,
How did you install UHD? is there a chance you've got conflicting uhd
installations, or updated parts of your system since you've built UHD yourself
(if you did that)?
Best regards,
Marcus
On 17 May 2018 17:08:43 GMT+02:00, kunal sankhe via USRP-users
<usrp-users@lists.ettus.com> wrote:
>Hi,
>
>I am trying to measure IQ Imbalance of USRP X310 with UBX-160
>daughtboard
>
>After running *uhd_cal_rx_iq_balance*, I got following error:
>
>
>terminate called after throwing an instance of
>'boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::lock_error>
>>'
>what(): boost: mutex lock failed in pthread_mutex_lock: Invalid
>argument
>Aborted (core dumped)
>
>
>The output of USRP Probe is following:
>
>linux; GNU C++ version 5.4.0 20160609; Boost_105800;
>UHD_003.011.000.git-106-g1b70b3e7
>
>-- X300 initialization sequence...
>-- Determining maximum frame size... 1472 bytes.
>-- Setup basic communication...
>-- Loading values from EEPROM...
>-- Setup RF frontend clocking...
>-- Radio 1x clock:200
>-- Detecting internal GPSDO.... No GPSDO found
>-- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1304.3MB/s)
>-- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1309.5MB/s)
>-- [RFNoC Radio] Performing register loopback test... pass
>-- [RFNoC Radio] Performing register loopback test... pass
>-- [RFNoC Radio] Performing register loopback test... pass
>-- [RFNoC Radio] Performing register loopback test... pass
>-- Performing timer loopback test... pass
>-- Performing timer loopback test... pass
> _____________________________________________________
> /
>| Device: X-Series Device
>| _____________________________________________________
>| /
>| | Mboard: X310
>| | revision: 11
>| | revision_compat: 7
>| | product: 30818
>| | mac-addr0: 00:80:2f:17:6e:03
>| | mac-addr1: 00:80:2f:17:6e:04
>| | gateway: 192.168.10.1
>| | ip-addr0: 192.168.10.2
>| | subnet0: 255.255.255.0
>| | ip-addr1: 192.168.20.2
>| | subnet1: 255.255.255.0
>| | ip-addr2: 192.168.30.2
>| | subnet2: 255.255.255.0
>| | ip-addr3: 192.168.40.2
>| | subnet3: 255.255.255.0
>| | serial: 3123D76
>| | FW Version: 5.1
>| | FPGA Version: 33.0
>| | RFNoC capable: Yes
>| |
>| | Time sources: internal, external, gpsdo
>| | Clock sources: internal, external, gpsdo
>| | Sensors: ref_locked
>| | _____________________________________________________
>| | /
>| | | RX Dboard: A
>| | | ID: UBX-160 v2 (0x007e)
>| | | Serial: 312289F
>| | | _____________________________________________________
>| | | /
>| | | | RX Frontend: 0
>| | | | Name: UBX RX
>| | | | Antennas: TX/RX, RX2, CAL
>| | | | Sensors: lo_locked
>| | | | Freq range: 10.000 to 6000.000 MHz
>| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
>| | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
>| | | | Connection Type: IQ
>| | | | Uses LO offset: No
>| | | _____________________________________________________
>| | | /
>| | | | RX Codec: A
>| | | | Name: ads62p48
>| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
>| | _____________________________________________________
>| | /
>| | | RX Dboard: B
>| | | _____________________________________________________
>| | | /
>| | | | RX Frontend: 0
>| | | | Name: Unknown (0xffff) - 0
>| | | | Antennas:
>| | | | Sensors:
>| | | | Freq range: 0.000 to 0.000 MHz
>| | | | Gain Elements: None
>| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
>| | | | Connection Type: IQ
>| | | | Uses LO offset: No
>| | | _____________________________________________________
>| | | /
>| | | | RX Codec: B
>| | | | Name: ads62p48
>| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
>| | _____________________________________________________
>| | /
>| | | TX Dboard: A
>| | | ID: UBX-160 v2 (0x007d)
>| | | Serial: 312289F
>| | | _____________________________________________________
>| | | /
>| | | | TX Frontend: 0
>| | | | Name: UBX TX
>| | | | Antennas: TX/RX, CAL
>| | | | Sensors: lo_locked
>| | | | Freq range: 10.000 to 6000.000 MHz
>| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
>| | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
>| | | | Connection Type: QI
>| | | | Uses LO offset: No
>| | | _____________________________________________________
>| | | /
>| | | | TX Codec: A
>| | | | Name: ad9146
>| | | | Gain Elements: None
>| | _____________________________________________________
>| | /
>| | | TX Dboard: B
>| | | _____________________________________________________
>| | | /
>| | | | TX Frontend: 0
>| | | | Name: Unknown (0xffff) - 0
>| | | | Antennas:
>| | | | Sensors:
>| | | | Freq range: 0.000 to 0.000 MHz
>| | | | Gain Elements: None
>| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz
>| | | | Connection Type: IQ
>| | | | Uses LO offset: No
>| | | _____________________________________________________
>| | | /
>| | | | TX Codec: B
>| | | | Name: ad9146
>| | | | Gain Elements: None
>| | _____________________________________________________
>| | /
>| | | RFNoC blocks on this device:
>| | |
>| | | * DmaFIFO_0
>| | | * Radio_0
>| | | * Radio_1
>| | | * OFDMEq_0
>| | | * FFT_0
>| | | * Block_0
>| | | * Block_1
>| | | * FIFO_0
>| | | * FIFO_1
>| | | * FIFO_2
>| | | * FIFO_3
>| | | * FIFO_4
>| | | * FIFO_5
>
>
>Please let me know how to resolve this issue.
>
>Thanks in advace.
>
>Regards,
>Kunal
--
This was written on my cellular phone. whilst an impressive piece of
engineering, this might not be the perfect device to write emails on - please
excuse my brevity.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
