I've attached a .tar.gz of the USRP-related wiki pages from the original
wiki. Does not include images, though.
-- M
On Mon, Oct 23, 2017 at 10:06:54PM +, Angilberto Muniz Sb via USRP-users
wrote:
>Hi Kyeong,
>Thanks for the info.. I'll try to find the article..
>Regards,
>
>
Thankx Marcus -- I´ll try that too...
Here is the link for the article, John..
http://gnuradio.microembedded.com/usrpserialbelow500
Angilberto. ___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_l
Hi Kyeong,Thanks for the info.. I'll try to find the article..
Regards,
Angilberto.
Em segunda-feira, outubro 23, 2017, 5:08 PM, Kyeong Su Shin
escreveu:
Hello Angilberto Muniz:
An alternative to this is to modify the USRP 1 motherboard (instead of the
dauthgerboard). There used to be a G
If anyone has that wiki page archived, I'd love to see it as I have a
very early USRP1 that I meant to modify but never got around to it.
IIRC, it was to add a missing clock signal to the daughterboard
connector. In the meantime, I'll dig for the resources that Kyeong
mentioned.
On 10/23/201
Hello Angilberto Muniz:
An alternative to this is to modify the USRP 1 motherboard (instead of the
dauthgerboard). There used to be a GNURadio wiki page about this
("USRPSerialBelow500"), but it is apparently gone. You can still find some
old e-mail archives and Chinese articles (with images) rega
On 10/23/2017 02:16 PM, Angilberto Muniz Sb via USRP-users wrote:
Hi,
I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine
with USRP1 Rev4.5, but wont work with USRP1 Rev2.
I read somewhere that I shoud modify the flex900 to make it work with
USRP1 Rev2.
The problem is I r
Hi,I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine with
USRP1 Rev4.5, but wont work with USRP1 Rev2.
I read somewhere that I shoud modify the flex900 to make it work with USRP1
Rev2.
The problem is I read two different tips...
in "https://files.ettus.com/manual/page_dboard
