On 04/17/2018 09:04 AM, ALEJANDRO BLANCO PIZARRO wrote:
Hi all, Marcus,
Finally, I've fed one USRP with the clock that I generated. But I
would like to check if it is working properly, besides, I explicitly
enabled the external clock using set_clock_source("external").
To do this, I've check
Hi all, Marcus,
Finally, I've fed one USRP with the clock that I generated. But I would
like to check if it is working properly, besides, I explicitly enabled the
external clock using set_clock_source("external").
To do this, I've checked the REF LED in the front panel.
--> Without adding the ex
On 04/10/2018 06:49 AM, ALEJANDRO BLANCO PIZARRO wrote:
Hi all, Marcus,
I continue trying to generate the square signal as a clock but now by
means of a FPGA.
The square signal, that I generated, has *a period of 100 ns and a Vpp
of 0.65 V (in attached). *These values are correct in order to
Hi all, Marcus,
I continue trying to generate the square signal as a clock but now by means
of a FPGA.
The square signal, that I generated, has *a period of 100 ns and a Vpp of
0.65 V (in attached). *These values are correct in order to feed a USRP?
Thanks in advance. Best regards,
Alejandro
20
On 04/06/2018 10:16 AM, ALEJANDRO BLANCO PIZARRO wrote:
Hi Marcus,
Thanks a lot! What GPSDO do you recommend? We need to buy one.
Best regards,
Alejandro
Most Ettus customers with more than a single USRP tend to use the
Octoclock-G:
https://www.ettus.com/product/details/OctoClock-G
2018-
Hi Marcus,
Thanks a lot! What GPSDO do you recommend? We need to buy one.
Best regards,
Alejandro
2018-04-06 16:00 GMT+02:00 Marcus D. Leech :
> On 04/06/2018 08:29 AM, ALEJANDRO BLANCO PIZARRO wrote:
>
> Hi all, Marcus,
>
> Thanks for the answer, it was really useful. Now, I am trying to gener
On 04/06/2018 08:29 AM, ALEJANDRO BLANCO PIZARRO wrote:
Hi all, Marcus,
Thanks for the answer, it was really useful. Now, I am trying to
generate the 10Mhz signal using a vector signal generator, but the
signal is nor really pure because the signal generator bandwidth is
only 60MHz. Also, the
Hi all, Marcus,
Thanks for the answer, it was really useful. Now, I am trying to generate
the 10Mhz signal using a vector signal generator, but the signal is nor
really pure because the signal generator bandwidth is only 60MHz. Also, the
Vpp of the signal is 1.4 V, is it correct?
If someone can s
On 04/05/2018 06:20 AM, ALEJANDRO BLANCO PIZARRO via USRP-users wrote:
Dear community,
I would like to add an external clock to two USRP in order to have the
same clock discarding possible synchronization issues. The desirable
frequency of the clock would be 184 MHz (compatible with LTE).
An
Dear community,
I would like to add an external clock to two USRP in order to have the same
clock discarding possible synchronization issues. The desirable frequency
of the clock would be 184 MHz (compatible with LTE).
And I was wondering about what will be the possible solutions:
--> It is poss
10 matches
Mail list logo
