It looks like rx error code: 1 means UHD isn't getting samples from
the SDR. I thought it was some sort of error that the UHD sink was
configured wrong in gnuradio. I'm using a custom FPGA image that only
transmits samples on certain conditions. I discovered I had a bad
connector, so the second
I have 2 E312 units. On one I have a gnuradio script that works fine.
I cloned the sd card from the first E312, and put it on the second
E12, and am getting the following error:
WARN: USRP Source Block caught rx error code: 1
Is this some sort of hardware problem, since the 2 systems have
identi
I have 2 E312 units. On one I have a gnuradio script that works fine.
I cloned the sd card from the first E312, and put it on the second
E12, and am getting the following error:
WARN: USRP Source Block caught rx error code: 1
Is this some sort of hardware problem, since the 2 systems have
identi
I think the answers are yes and yes.
On Wed, Nov 14, 2018 at 6:46 AM Leandro EchevarrÃa via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hey folks,
>
> The Knowledge Base webpage for the SBXs daughterboards [1] mentions that
> their maximum output power is 100 mW (20 dBm), and that the trans
I'm pretty sure you can't break the loader by changing the FPGA image. The
cypress IC handles the loading. I've played around with the FPGA image a
lot, including some broken images, and never had a problem loading a new
image.
On Mon, Aug 27, 2018 at 4:38 PM Javier Coronel (Expo Impex, S.L.) vi
an see which system call returns -EPERM. Yes this is a
> hail mary operation.
>
> Philip
>
> On 12/28/2017 01:13 PM, Michael Don via USRP-users wrote:
> > I'm still getting the same error with the USB 2.0 for the B200 on my
> tegra
> > system.
> >
> > Us
t;
>> On 12/19/2017 06:44 PM, Marcus D. Leech via USRP-users wrote:
>> > On 12/19/2017 05:09 PM, Michael Don via USRP-users wrote:
>> >>
>> >> I've build and installed UHD 3.10.1.1 on a Tegra TX2 (ARM64
>> >> platform). The USB 3.0 is wor
ration, once I get
things working I may ask you more about it.
-Mike
On Tue, Dec 19, 2017 at 7:58 PM, Philip Balister via USRP-users <
usrp-users@lists.ettus.com> wrote:
> On 12/19/2017 06:44 PM, Marcus D. Leech via USRP-users wrote:
> > On 12/19/2017 05:09 PM, Michael Don via US
I've build and installed UHD 3.10.1.1 on a Tegra TX2 (ARM64 platform). The
USB 3.0 is working, but I'm getting errors with the USB 2.0 on a USRP B200.
uhd_find_devices works, but uhd_usrp_probe, and the uhd application
examples give the error below. Note that I've tried running with sudo, and
ha
USRPs can do Tx and Rx at the same time. I did an experiment where I
modified the FPGA image of Node 2 to send the Rx samples directly to Tx on
a different freq., and measured the phase difference of the echo from Node
2 at Node 1. I didn't measure the phase difference of the carrier, rather
the
What I did was to set up an Ethernet connection and use winSCP for file
transfer.
https://files.ettus.com/manual/page_usrp_e3x0.html - setting up ethernet
https://winscp.net/eng/index.php - winSCP
-Mike
On Tue, Aug 1, 2017 at 2:31 PM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via U
11 matches
Mail list logo
