Hi Neel,
I'm using RFNoC with X310 and I'd like to use multiple PCs to get data from
CE blocks via Ethernet (e.g. PC1 get/set data for CE1 and CE2, PC2 get/set
data for CE3 and CE4...).
Could you help me, please?
Best regards,
LTP
On Tue, Jul 25, 2017 at 10:47 AM, Neel Pandeya
wrote:
> Hello L
Hello LTP:
What exactly are you trying to do? Are you trying to connect multiple host
computers to a single X310? Do you want to do this over Ethernet, PCIe, or
both? Do you want to operate the X310 simultaneously from multiple host
computers, or stream data to/from multiple host computers simulta
Hi lists,
I've found that NC-10 USRP (
http://novatorsolutions.se/wp-content/uploads/2017/05/Channelizer-NC-10-USRP-multiple-platform-with-capabilities-for-direction-find-of-up-to-128-sources-and-beamforming.pdf)
allow multiple PCs connect to it to get data via PCIe or SFP+ interfaces.
Could you
Hi,
I am modifying the "txrx_loopback_to_file" example on B210 to make the TX
signal burst. The TX and RX gains are configured manually at fixed value, but
the received signal level has some oscilation the at the beginning of each
burst. Could anybody explain why this happens please? The fig
What I did was instead of creating an enable flag, I used the PKT_SIZE
value I write when I execute a flowgraph to be my enable:
assign enabled = (PKT_SIZE > 0) ? 1'b1 : 1'b0;
assign o_tvalid = enabled;
That should work, right? If not, how do I know that initialization is done?
I didn't write
In the first screenshot you captured your block sending out a command
response packet. That is normal.
In the second screenshot, I couldn't see the full value of the header /
first word, so I cannot say if it had any issues.
Did you add an explicit enable for your block that turns it on after
ini
One last piece of oddball info I've discovered.
RFNoC:dataGenerator -> RFNoC:FIFO -> throttle -> QT GUI Time Sink
1 - If I program the X310 and run it, I get timeouts streaming
immediately and nothing shows up on the timesink. If I then stop it and
run it again, I get some data through, and t
Hi Roy. The hottest components on the B200mini-i are the ADI RF Integrated
Transceiver (AD9364), the Xilinx Spartan 6 FPGA (XC6SLX75-3CSG484I), and
the Cypress FX3 USB chip (CYUSB3014-BZXI). Consult the datasheets for the
max. recommended junction temperature of these devices.
-Robin
On Mon,
What about measuring with kalibrate-uhd?
https://github.com/cryptik/kalibrate-uhd
On Mon, 24 Jul 2017 at 13:11 Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com> wrote:
> The best method for measuring a fundamental parameter like frequency drift
> would be to use a signal source of k
The best method for measuring a fundamental parameter like frequency
drift would be to use a signal source of known (and much-superior)
stability, and use something like uhd_fft with the B210 to observe drift
over time (use the peak-hold feature in the FFT display).
The problem with using the end
Hi all,
I read that the stated temperature range for the B200mini-i is 0-45degC. In my
application, the required temperature range is -20-60degC. However, I cannot
afford the use of enclosure (due to weight limitations), therefore I need to
come up with my own cooling solution. Can you please
Dear John,
at this point my recommendation is: Describe your measurement setup in
more detail, and verify it's useful for measuring the clock quality of
the B210, and not the of your CC11xx system. In fact, from what you've
described, I can't really say I understand how this measures the clock
of
I am currently having a lot of problems communicating with an x310 containing a
twin RX.
I believe it stems from the fact that centos 6.5 comes loaded with python 2.6,
while the UHD and GNU radio version required needs python 2.7 I have loaded
2.7, and tried running pybombs but without much su
HI,all,
Do you have any suggestions about this?
thank you.
best regards
John
On Mon, Jul 24, 2017 at 9:15 AM, 戚科峰(研三 福州) wrote:
> Hi,Marcus,
>
>
>
> we use The B210 as a basestation and cc1120 as the tranceiver of UE.
>
> The B210 uses the Frequency offset estimation algorithm to estimate the
>
14 matches
Mail list logo
