Hi Neel, I'm using RFNoC with X310 and I'd like to use multiple PCs to get data from CE blocks via Ethernet (e.g. PC1 get/set data for CE1 and CE2, PC2 get/set data for CE3 and CE4...). Could you help me, please?
Best regards, LTP On Tue, Jul 25, 2017 at 10:47 AM, Neel Pandeya <neel.pand...@ettus.com> wrote: > Hello LTP: > > What exactly are you trying to do? Are you trying to connect multiple host > computers to a single X310? Do you want to do this over Ethernet, PCIe, or > both? Do you want to operate the X310 simultaneously from multiple host > computers, or stream data to/from multiple host computers simultaneously? > Are you using RFNoC with your X310? > > You may want to contact Novator directly for more information about their > NC-10 USRP Channelization Toolkit. > > --​Neel Pandeya > > > > On 24 July 2017 at 20:00, L TP via USRP-users <usrp-users@lists.ettus.com> > wrote: > >> Hi lists, >> >> I've found that NC-10 USRP (http://novatorsolutions.se/wp >> -content/uploads/2017/05/Channelizer-NC-10-USRP-multiple- >> platform-with-capabilities-for-direction-find-of-up-to- >> 128-sources-and-beamforming.pdf) allow multiple PCs connect to it to get >> data via PCIe or SFP+ interfaces. >> >> Could you tell me more about can I use multiple PCs connecting with USRP >> X310 to get data from CEs via SFP+ interfaces, please? >> >> Thanks in advances. >> >> With best regards, >> LTP >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
