Mmm, seems a module (driver) issue to me.
Does your other F-machines have the same wireless card? Also, can you
connect using wpa_supplicant or other DEs like GNOME?
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/m
Hi Andreas,
"SELinux has wasted too much time of my life over the years,
so I decided to no longer use it. I keep my computers up to date
and configure them properly. If that isn't enough, bad luck."
You shoudn't have any problems at all... c'on, it's GNU/Linux! Even a local
firewall is obsolete d
Hello Martin, sounds more like a mirrors issue; to confirm that please
clean your cache and try to upgrade your system again but this time using
yum.
On Sun, Aug 2, 2015, 14:33 Martin Møller Skarbiniks Pedersen <
traxpla...@gmail.com> wrote:
> Hi,
>
> After upgrading from F21 to F22 and switchi
015 at 19:46, Martin Cigorraga
> wrote:
>
>> Hello Martin, sounds more like a mirrors issue; to confirm that please
>> clean your cache and try to upgrade your system again but this time using
>> yum.
>>
> OK. yum-deprecated works very fast. A few seconds to install
That was a nice tip Ed, thanks.
As someone relatively new to SELinux, could you point me please to a
resource listing all default SELinux contexts?
On Mon, Aug 10, 2015, 11:55 Ed Greshko wrote:
> On 08/10/15 22:45, Amadren wrote:
> > I have a problem with OpenVPN in Fedora 23. When I try to conn
On Tue, Aug 11, 2015, 01:25 Ed Greshko wrote:
On 08/11/15 11:52, Martin Cigorraga wrote:
> That was a nice tip Ed, thanks.
Welcome. I discovered that the hard way a few years ago. Memory still
works. :-)
Hehe, sounds like an old tune to me.
> As someone relatively new to SELinux, cou
Hmm, I'm not sure that's the correct file; did you try with 'lxappearance'?
On Tue, Aug 11, 2015, 03:28 Jonathan Ryshpan wrote:
> Thanks. It mostly works well. Unfortunately (sub) windows in
> evolution
> which are used for displaying or composing messages are still shown in
> a small font. T
4.1.4 works fine on my HP dv7 4287cl mid2010.
However previous 4.1.x kernels were behaving odd in the sense that right
after booting up the system I had a sustained CPU load of ~1.5 - what drove
me crazy and pushed me to try the 4.1.4 kernel at that time in testing.
So far, nothing else to report
Hello,
Please let me know if I should address this question to another list.
I recently discovered Lollypop music player - a very neat one - and now I'm
intrigued if there's a way to make the top part of the window frame thinner
as shown in Lollypop's screenshots: https://gnumdk.github.io/lollypo
What I'm noticing now is that the graphic server will freeze after some
ours of continue running (i915 module).
I'm about to take a backup of / here (Btrfs) so I can safely try the kernel
currently residing in Rawhide.
On Fri, Aug 14, 2015, 17:24 Robert Moskowitz wrote:
>
>
> On 08/14/2015 04:1
NVIDIA repo: http://negativo17.org/nvidia-repository-improvements/
On Fri, Aug 14, 2015, 16:32 Pál, László wrote:
> Hi,
>
> Finally it has been found this is some kind of grub2 bug related to 16bit
> initrd thingies... :) after I've modified the script (10_linux) everything
> is fine. However be
No errors here. Could it be a mirrors problem?
On Fri, Aug 14, 2015, 15:59 Patrick O'Callaghan
wrote:
> On Fri, 2015-08-14 at 13:46 -0400, Robert P. J. Day wrote:
> > i'm sure i'm not the only one seeing this -- "dnf update" failing
> > to
> > access the packages in the subject line. workaroun
FYI folks, there's a new kernel ready for testing in the updates-testing
repo -- been using it for above an hour, so far working well.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Co
music player's website could be
> cropped as well.
>
Err... well... *caugh*
https://github.com/gnumdk/lollypop/issues/234#issuecomment-131014263
Thanks!
>
> ---- On Fri, 14 Aug 2015 04:07:17 -0400 *Martin Cigorraga
> >* wrote
>
> Hello,
>
> Please let
Hello Craig,
Could you please copy the output it produces when you launch the
application from the command line?
On Sun, Aug 16, 2015, 17:17 Craig Lanning wrote:
> Something has happened in the last couple of months that causes
> audacity to not want to start.
>
> If I type 'audacity audio-file
Lol, 'with a hammer' - so true xD
On Sun, Aug 16, 2015, 19:40 Andrew R Paterson
wrote:
> On Sunday 16 August 2015 21:14:38 Martin Cigorraga wrote:
> > Hello Craig,
> >
> > Could you please copy the output it produces when you launch the
> > application from
Hi all,
I would like to add that there's a convenient utility shipped with Fedora
(at least with the GNOME version) called 'Disks' that helps you tweak some
of your disk options as well as check its health state by showing the SMART
information.
Cheers.
On Sun, Aug 16, 2015 at 12:47 PM, Tom Hors
Why shouldn't you?
I would also add: theory comes after experience and experience does to the
master. When in doubt just go and try :)
On Thu, Aug 13, 2015 at 12:04 AM, Robert Moskowitz
wrote:
> I am setting up a 'new' F22 system. On this F21 system, I have a F21 QEMU
> vm.
>
> Can I 'simply' m
Hi,
I recently came up with this 'issue' (not really an issue in fact, please
read along) when I configured a Webmin panel on a CentOS 6.7 instance we
use at work.
Thing is that the sudo tool provides a configuration flag to deny a command
execution if it's not being invoked from a console. Origi
What!?
Is this a part of another thread or what?
On Thu, Aug 20, 2015 at 8:38 PM Sylvia Sánchez wrote:
> Because every one of them are pulling the rope in the direction of its
> own way and benefit.
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or change subscription
Try refreshing your local cache: # dnf clean metadata expire-cache. If that
doesn't work, a # dnf clean all should do it. If you still doesn't see the
packages you're looking for then you'll have to wait for your mirrors to
sync up.
On Thu, Aug 20, 2015 at 6:31 PM Kevin Fenzi wrote:
> On Thu, 20
Hello Clemens,
Adding to what Germán already said you might be interested in checking the
dnf configuration file, /etc/dnf/dnf.conf -- and look for this paramenter:
installonly_limit=2
To learn about it: $ man dnf.conf
Cheers
On Thu, Aug 20, 2015 at 4:00 PM Clemens Eisserer
wrote:
> > Because
Hi,
I'm not running F21 anymore so I'm not sure if this apply but, did you
check the updates-testing repo?
Kernel 4.1.5 has been working very nice since the last couple of weeks or
so.
Cheers
On Fri, Aug 21, 2015 at 12:41 PM, CS DBA wrote:
> Hi All;
>
> I'm running Fedora 21 on a Dell M3800 la
Hi all,
I'm a newcomer to Fedora and still learning its ways so excuse me if my
question sounds stupid.
Now, I want to remove GNOME from my install as I use i3; from what I saw
there's no gnome-group or similar goup available, how should I proceed?
Regards,
-Martin
--
users mailing list
users@li
Hi all,
@Lawrence: if the screen goes black at boot time it seems it could a video
issue, does your computer have a hybrid GPU setup? You can do "$ lspci |
grep -i vga" from your running system. Also, you might try booting the ISO
in the so-called 'safe' mode to reach the GUI.
I'm running F21 and
indow Managers)
but there's none for GNOME Desktop. Of course I believe one could go and
remove leftovers by hand, what I say is that's strange - just to say
something - that there isn't a meta-group that takes care of that.
Regards.
On Sat, Mar 7, 2015 at 8:58 PM, Sam Varshavchik
wrote:
Ahh, that's actually a nice tip Joe, thanks a lot.
On Sat, Mar 7, 2015 at 9:09 PM, Joe Zeff wrote:
> On 03/07/2015 03:58 PM, Sam Varshavchik wrote:
>
>> Of course, all of the old baggage still remains installed, after that. A
>> small waste of disk space, mostly. I should, one of these days, go
Hello, it's a GPU modules issue, by all means; I experienced the very same
the first time I booted into the live environment to install Fedora.
You need to find a workaround, maybe by adding the needed parameters in
your kernel boot line.
Regards.
On Sat, Mar 7, 2015 at 9:45 AM, wrote:
> Greetin
As for alternative terminals, rxvt-unicode-256color (actual name of the
package) is a nice starting point (you can customize it via ~/.Xdefaults).
Another good alternative and more close to what I think you are used to is
lxterminal, the terminal emulator from Xfce.
Then you have Konsole (KDE's ter
Thank you Rahul.
After doing the proper backup I will try something in the line of # yum
erase gdm $(rpm -qa | grep gnome).
On Sun, Mar 8, 2015 at 1:05 AM, Rahul Sundaram wrote:
> Hi
>
> On Sat, Mar 7, 2015 at 7:12 PM, Martin Cigorraga wrote:
>
>> Ahh, that's actually a
That was an enlightening answer, thank you very much Patrick.
-Martin
On Sun, Mar 8, 2015 at 8:17 AM, Patrick O'Callaghan
wrote:
>
> On 8 March 2015 at 00:10, Martin Cigorraga
> wrote:
>
>> Yes, it seems that some packages in Fedora pulls down more dependencies
&g
On Sun, Mar 8, 2015 at 5:00 PM, Suvayu Ali
wrote:
> On Sat, Mar 07, 2015 at 06:32:22PM -0300, Martin Cigorraga wrote:
> >
> > I'm a newcomer to Fedora and still learning its ways so excuse me if my
> > question sounds stupid.
> > Now, I want to remove GNOME from m
Hello Stan,
Just a minor clarification: when compiling, the -j flag should point to a
unit above your available cores in order to fully utilize all of them.
I'm sure you already know this, but nevertheless beware when doing
intensive compilation and using all your cores as you might end with a
non
Ah... couldn't tell, but the Gentoo wiki and Arch's one (in a lesser
extent), are excellent resources to learn everything about that!
HTH
On Mon, Mar 9, 2015 at 5:36 PM, stan wrote:
> On Mon, 9 Mar 2015 17:30:57 -0300
> Martin Cigorraga wrote:
>
> > Hello Stan,
>
Hi all, couldn't answer earlier, thanks for hooking on the thread.
@billo:
Yeah, my answer to most of these "how do I do this complex reconfiguration
Why should it be 'complex'? It's certainly complex here - or it's just me
as I'm not used to Fedora's way.
I've been using Arch & Gentoo for the la
Hey Bob,
Try cleaning the yum cache for unused packages...
On Fri, Mar 13, 2015 at 7:24 AM, Paul Cartwright
wrote:
> On 03/13/2015 06:04 AM, Bob Goodwin wrote:
> >
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/sda350G 49G 0 100% /
> >
> > Ok, there is the problem.
Oops, thank you Michael!
On Mar 13, 2015 11:04 AM, "Michael Schwendt" wrote:
> On Fri, 13 Mar 2015 08:29:57 -0300, Martin Cigorraga wrote:
>
> > Hey Bob,
> >
> > Try cleaning the yum cache for unused packages...
>
> By default, Yum does not keep inst
TL;DR (at least not the entire thread)
If you go with Rsync you may find incron an useful add-on as well as with
it you can monitor a variety of events on any given file or directory, like
OPEN_READ, CREATE, CLOSE, CLOSE_WRITE, etc - and this way backup your data
in real time whenever a condition
Hi all,
After upgrading some python packages via pip I found I left Yum in a
non-working state:
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
pycurl: libcurl link-time ssl backend (nss) is different from
compile-time ssl ba
Hey,
so far yum seems to work okay, I'm on F21.
-M.
On Sun, Mar 22, 2015 at 9:40 PM, Sylvia Sánchez wrote:
> If you use yum to install something, does it works?
> BTW, what Fedora version are you using?
>
>
> Cheers!
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or
Hello Chris,
It's been awhile since I used KDE for last time but IIRC, both Apper (which
I tried back on Arch) and Muon (Kubuntu's package manager) supports offline
updates.
However at that time none of those systems where using systemd...
I will ask to my friends and let you know.
-M.
--
users
Hello Cameron,
Exactly! I absolutely agree with you.
In the past I never experienced such issues as the package manager my
previous distribution uses is written in C - without any external
dependencies other than its own libraries.
Thank you very much for your suggestions, I will implement my own
Hello Richards,
Quite interesting to actually talk to someone who actually has his hands
dirty and can talk about this issue :)
I remember reading a Lennart's post on his blog about a future when
packages will be installing in their own spaces and all of this managed
by systemd. Now my question (
Hello Neal,
The news you talk about somehow slipped under my radar...
I use to run pdnsd (a similar software) and while it worked good for most of the
time I still had to restart it from time to time to force a cache refresh,
specially when using with dnscrypt-proxy.
I will start reading about unb
I would like to add to what @birger already said that currently Fedora
mounts /tmp as /tmpfs by default; that means that the /tmp directory
we access is in fact a sort of ram disk that is destroyed every time
we shut down our system.
You can learn more tmpfs here:
http://en.wikipedia.org/wiki/Tmpf
Hi all,
I already have installed icedtead-web and Firefox but can't make WebEx
work, after allowing the plugin it tries to connect to Cisco's and
Akamai's resources only to pop an error message seconds later saying
the installation failed, 'try again' (to no avail).
Have you folks made it run on
Hi all,
What's the list where the evolution of the beta release is being followed?
I'm specially interested in looking at how well Fedup is performing.
B.R.
-Martin
On Wed, Apr 22, 2015 at 9:02 AM, Bob Goodwin wrote:
>
>
> On 04/22/15 06:35, Paul Cartwright wrote:
>
> you know about the test list
TYVM guys!
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Ha
If simply plugging the device doesn't work you could try ADB (adb push
/ pull) or even something like AirDroid - be aware that AirDroid works
only through wifi so expect low speeds.
-Martín
On Mon, Apr 27, 2015 at 5:42 PM, Jim Lewis wrote:
>
> Hello everyone,
>
> This worked fine on my older An
Hello Ranjan,
I believe Okular (KDE's PDF reader) should do it.
-Martín
On Mon, Apr 27, 2015 at 5:07 PM, Ranjan Maitra
wrote:
> Hi,
>
> A colleague sent me annotated (using Acrobat) comments on a pdf. I can't see
> them with zathura or evince. Is there some software that can read them?
>
> Many
Hmm, one possible place to look at is the changelog on the later
kernel packages as they may include clues about wifi module updates
and related software stack.
B.R.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/m
Hello,
I would like to know if it is enough to install the 'Security Lab' group in
order to get all the goodies from that spin.
-Martin
--
-Martín
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/us
Hello guys,
Dario, did you try stopping the NetworkManager services to then try to do
your stuff?
I didn't tried this yet but I suppose it should work...
Regards.
-Martin
On Mon, Jun 8, 2015, 09:12 Dario Lesca wrote:
> Il giorno sab, 06/06/2015 alle 21.43 +0300, Alchemist ha scritto:
> > Couple
May be he could try Korora (www.kororaproject.org) which has everything
setup and all eye-candy on right OOTB for graphical users.
On Tue, Jun 9, 2015 at 9:55 AM Matthew Miller
wrote:
> On Mon, Jun 08, 2015 at 10:54:35PM +, Amadeus W.M. wrote:
> > I'm not talking about the desktop, choosing
Hi,
Try groupinstall instead 'group install'.
On Wed, Jun 10, 2015, 22:45 Derrik Walker v2.0 wrote:
> I seem to have some issues with dnf, and Dr Google isn't helping ...
>
> So I installed the "Games and Entertainment," which did exactly nothing,
> except mark it installed.
>
> So, I figured ou
systemctl --user action service
On Sun, Jun 14, 2015 at 7:02 AM Edward Quick
wrote:
> Found out I needed to install polkit. Haven't come across this before but
> looks interesting!
>
> bash-4.3$ systemctl start tomcat@instance1
> AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ===
Use stop and start then.
On Tue, Jun 16, 2015 at 4:12 AM David Highley <
dhigh...@highley-recommended.com> wrote:
> "Joe Zeff wrote:"
> >
> > On 06/15/2015 07:44 PM, David Highley wrote:
> > > We always see failures after doing; systemctl stop firewald followed by
> > > systemctl start firewalld.
Quite interesting to know Matthew, thanks.
Btw, F21 and F22 releases - alongside their new distribution scheme - have
proven to be phenomenal so far, kudos!
-Martin
On Tue, Jun 16, 2015 at 1:36 PM Matthew Miller
wrote:
> On Tue, Jun 16, 2015 at 12:12:39AM -0700, David Highley wrote:
> > Generall
Check with SELinux Troubleshooter.
On Tue, Jun 16, 2015 at 6:24 PM jd1008 wrote:
>
>
> On 06/16/2015 03:22 PM, jd1008 wrote:
> > Selinux comlained the a program "attempted write on this directory"
> >
> > but it does not say which directory.
> > I looked in /var/log but even there it does not sa
RHEL/CentOS/Fedora comes with a quite complete set of SELinux rules making
the system quite secure OOTB, however as YMWV it won't hurt to keep an eye
on SELinux alerts which you can track using the SELinux Troubleshooting
application; there are also other quite useful SELinux related tools like
the
Hi,
One of the reasons I'm using Fedora is because the exceptional support for
SELinux and auditd that so far - despite a known incompatibility with
Docker + Btrfs - is working great.
Said that, kudos to everyone who makes SELinux integration such smooth.
On Tue, Jun 23, 2015 at 1:36 AM Kevin Wi
Why not just install Fedora via the command line?
The installation should be quite straightforward:
1. Partition your remote computer's drive(s)
2. Install Fedora there - for example using systemd-nspawn
3. Generate the GRUB menu
On Mon, Jun 22, 2015 at 1:56 PM Rick Stevens wrote:
> On 06/19/201
Hello Ger,
Could you please elaborate a bit further? What kind of issues are you
having? What did you do to try to solve them?
-Martin
On Thu, Jul 9, 2015, 11:49 Ger van Dijck wrote:
>
> Hello , I have a question : My Network applet in the upper command bar
> does not fuctionate anymore. Is th
What about C^d?
On Thu, Jul 9, 2015, 13:40 Maurizio Marini wrote:
> When I use telnet inside Konsole,
> to close telnet:
> Escape character is '^]'
>
> once upon a time, pressing
> Contr and ]
> closed telnet session, now it enlarge fonts, sadly.
> I have searched into
>
> Konsole/Settings/Edit
Sometimes you simply can't ssh - like when you need to test a connection to
a web server or a DDBB.
As I see it, telnet is far from dying.
On Thu, Jul 9, 2015 at 2:24 PM Matthew Woehlke
wrote:
> On 2015-07-09 12:40, Maurizio Marini wrote:
> > When I use telnet inside Konsole,
> > to close telnet
Thank you Gordon, will try it :D
On Thu, Jul 9, 2015 at 2:42 PM Gordon Messmer
wrote:
> On 07/09/2015 10:27 AM, Martin Cigorraga wrote:
> > Sometimes you simply can't ssh - like when you need to test a
> > connection to a web server or a DDBB.
> > As I see it, telnet
In case anyone else wants to follow Gordon's advice here is an interesting
guide to get started quickly:
http://www.irongeek.com/i.php?page=videos/ncat-nmap-netcat
HTH
On Thu, Jul 9, 2015 at 2:55 PM Martin Cigorraga
wrote:
> Thank you Gordon, will try it :D
>
> On Thu, Jul 9, 2
Look Arch Linux's wiki for LUKS / dm-crypt, you will probably need to read
some documentation but in an hour or less you should be able to create an
encrypted partition, an encrypted swap, learn how to unlock it manually or
via cryptab/cryptsecrets and so on.
GL.
On Wed, Jul 15, 2015, 22:21 Chris
Thank you!
(The rsync flags that Anaconda uses is definitely a plus)
On Wed, Jul 15, 2015, 23:58 Chris Murphy wrote:
> The gist is:
>
> cryptsetup, you can use the defaults which uses aes-xts-plain64 with a
> 256 bit key. I like the -y and -v options.
>
> You'll need to create or modify the /etc
Hello folks,
It happened to me too that about a week or so ago SELinux automatically
turned to 'Permissive' with an upgrade of selinux-related packages, I had
to relabel everything to get things back to its previous state.
Although I didn't delve in the issue at that moment I will keep an eye on
el-without-rebooting-first
but before landind there I was unaware of the 'fixfiles' tool :)
HTH, let us know if not.
On Mon, Jul 20, 2015 at 3:31 PM jd1008 wrote:
>
>
> On 07/20/2015 12:23 PM, Martin Cigorraga wrote:
> > Hello folks,
> >
> > It happene
Hi,
~ getenforce
Enforcing
Please be aware that setenforce will only change the mode SELinux is
running in. For a permanent change, you have to edit the configuration file.
On Mon, Jul 20, 2015 at 4:32 PM jd1008 wrote:
>
>
> On 07/20/2015 12:38 PM, Martin Cigorraga wrote:
> >
Hello James,
I would recommend you to start with any GNU+Linux manual (as 90% of what
you will learn there will apply to Fedora) to then learn the specifics
about the RHEL family.
A good starting point would be to define some projects (like 'put together
a home server'), set some goals ('configur
Suvayu, Matthew, you rock guys, thanks!
On Tue, Jul 21, 2015, 21:33 Matthew Miller wrote:
> On Wed, Jul 22, 2015 at 02:10:10AM +0200, Suvayu Ali wrote:
> > I'm sorry but "clean all" is not necessary at all! "clean metadata" or
> > "clean expire-cache" should be sufficient.
>
> You don't even ne
Hi all,
I'm trying to install the spin on VirtualBox (4.3.20) on an F21 x86_64 host
and got stuck there, anyone else?
Regards,
-Martin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Co
Thanks Jim, will do!
On Sun, Dec 28, 2014 at 1:37 AM, Jim Lewis wrote:
>
> > Hi all,
> > I'm trying to install the spin on VirtualBox (4.3.20) on an F21 x86_64
> > host
> > and got stuck there, anyone else?
> > Regards,
> > -Martin
> > --
>
> Hi Martin,
>
> Check this: https://bugzilla.redhat.
A brief update,
You nailed it: I went with a basic install (I don't know to which group
httrack belongs to) and this time were able to finish the process as
expected.
Cheers.
On Mon, Dec 29, 2014 at 1:33 AM, Martin Cigorraga wrote:
> Thanks Jim, will do!
>
> On Sun, Dec 28, 2014 a
77 matches
Mail list logo
