Re: OT: systemctl staus lines that show failed? How to clean?

On 8/3/25 5:57 PM, Michael D. Setzer II wrote: On 3 Aug 2025 at 16:12, Samuel Sieb wrote: Date sent: Sun, 3 Aug 2025 16:12:59 -0700 Subject: Re: OT: systemctl staus lines that show failed? How to clean? To: users@lists.fedoraproject.org From: Samuel Sieb Send reply to: Community support for

Re: OT: systemctl staus lines that show failed? How to clean?

On 8/3/25 4:06 PM, Michael D. Setzer II via users wrote: Got (There is no /opt/VirtualBox directory?) # journalctl -b 0 -g fail Aug 04 00:44:09 setzcodell.dyndns.org systemd-vconsole-setup[320]: /usr/ bin/setfont failed with a "system error" (EX_OSERR), ignoring. Aug 04 00:44:09 setzcodell.dyndn

Re: help raid 1 message

On 7/29/25 2:34 AM, François Patte wrote: Le 29/07/2025 à 00:23, Samuel Sieb a écrit : On 7/28/25 11:18 AM, François Patte wrote: Error: The primary GPT table is corrupt, but the backup appears OK, so that will be used. OK/Cancel? ^C Model: QNAP TR-002 DISK00 (scsi) Disk /dev/sdc: 8002GB

Re: help raid 1 message

On 7/28/25 11:18 AM, François Patte wrote: Error: The primary GPT table is corrupt, but the backup appears OK, so that will be used. OK/Cancel? ^C Model: QNAP TR-002 DISK00 (scsi) Disk /dev/sdc: 8002GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags: Number  Start   E

Re: multiboot 2 HD

On 7/16/25 2:55 PM, Patrick Dupre via users wrote: On 7/15/25 2:45 PM, Patrick Dupre via users wrote: Sent: Sunday, July 13, 2025 at 1:06 PM From: "Steven I Usdansky via users" To: "users@lists.fedoraproject.org" Cc: "Steven I Usdansky" Subject: Re: multiboot 2 HD Each of my three drive

Re: Emergency mode - maybe OT

On 7/16/25 10:07 AM, Paolo Galtieri wrote:  during the night there was a power failure. When I powered up one of my systems it booted into emergency mode.  I'm not sure what to do to get it out of this.  Nothing I've tried works. Both root and home are mounted.  The default target is graphical

Re: multiboot 2 HD

On 7/15/25 2:45 PM, Patrick Dupre via users wrote: Sent: Sunday, July 13, 2025 at 1:06 PM From: "Steven I Usdansky via users" To: "users@lists.fedoraproject.org" Cc: "Steven I Usdansky" Subject: Re: multiboot 2 HD Each of my three drives is bootable has its own EFI partition and multiple L

Re: Problem accessing lvm on nvme drive

On 7/13/25 1:31 PM, Robert McBroom via users wrote: During boot I get the message block nvme0n1: No UUID available providing old NGUID When I try to mount the lvm I get the message ~# mount /dev/mapper/fedora /sd1 mount: /sd1: fsconfig system call failed: /dev/mapper/fedora Can't lookup block

Re: Dell Latitude 7420's camera not working on new F42 install

On 7/14/25 11:27 AM, Ranjan Maitra via users wrote: I installed F42 from scratch on a Dell Latitude 7420 about a month ago, and only now have I noticed that the in-built camera does not appear to be working. I just get a black screen. Perhaps it is missing a driver or something else. I am stil

Re: multiboot 2 HD

On 7/12/25 3:25 PM, George N. White III wrote: On Sat, Jul 12, 2025 at 6:08 PM Samuel Sieb <mailto:sam...@sieb.net>> wrote: On 7/12/25 1:57 PM, Patrick Dupre via users wrote: >> Booting multiple Fedora installs from the same grub can be tricky.  I >> thi

Re: multiboot 2 HD

On 7/12/25 1:57 PM, Patrick Dupre via users wrote: Booting multiple Fedora installs from the same grub can be tricky. I think the easiest way is for one of the grub configs to have an entry to chain to the other config. Yes, How I could chain 2 /boot ? I think you just add an entry to the pr

Re: multiboot 2 HD

On 7/12/25 12:18 PM, Patrick Dupre via users wrote: Sent: Saturday, July 12, 2025 at 8:41 PM From: "Samuel Sieb" To: users@lists.fedoraproject.org Subject: Re: multiboot 2 HD On 7/12/25 5:53 AM, Patrick Dupre via users wrote: I wanted to install manually a "small" distr

Re: multiboot 2 HD

On 7/12/25 5:53 AM, Patrick Dupre via users wrote: I wanted to install manually a "small" distribution on /dev/sdb3 Under the install, I can select the mount point / (required) Then I have an issue for /boot It says recommended, but it seems that it is required I cannot to go to next step till

Re: multiple spaces in bash strings. [SOLVED]

On 7/12/25 12:18 AM, Francis Montagnac via users wrote: Hi. home user wrote: Here's the real code fragment: # 220 lines of code above here constructs string variables # line1, line2, line3, begchars, and endchars. line1="${begchars}${line1}" line2="${begchars} ${line2}" line3="${begchars}

Re: using rsync for backups - want to run only if changes from last backup

On 7/11/25 1:59 PM, Go Canes wrote: On Fri, Jul 11, 2025 at 4:29 PM Robert Moskowitz via users wrote: rsync -tvz rsync.ietf.org::id-archive/*.txt /home/common/ietf/drafts So you are rsyncing off the internet? In that case I think your main option is the suggestion to use rsync with --dry-run

Re: touchegg.desktop

On 7/5/25 3:58 AM, Patrick Dupre via users wrote: On 7/5/25 1:00 AM, Patrick Dupre via users wrote: I do not understand this: Jul 05 09:37:08 Sappho touchegg.desktop[4301]: Error connecting to Touchégg daemon: Could not connect: Connection refused Jul 05 09:37:03 Sappho touchegg.desktop[430

Re: touchegg.desktop

On 7/5/25 1:00 AM, Patrick Dupre via users wrote: I do not understand this: Jul 05 09:37:08 Sappho touchegg.desktop[4301]: Error connecting to Touchégg daemon: Could not connect: Connection refused Jul 05 09:37:03 Sappho touchegg.desktop[4301]: Reconnecting in 5 seconds... You already asked a

Re: F42: instructions on setting up hibernate

On 7/4/25 9:41 PM, Ranjan Maitra via users wrote: On Fri Jul04'25 07:15:54PM, Samuel Sieb wrote: From: Samuel Sieb Date: Fri, 4 Jul 2025 19:15:54 -0700 To: users@lists.fedoraproject.org Reply-To: Community support for Fedora users Subject: Re: F42: instructions on setting up hibernate O

Re: firefox fonts problem since upgrade to F42

On 7/4/25 11:31 AM, home user via users wrote: On 7/4/2025 10:32 AM, Ranjan Maitra via users wrote: On Fri Jul04'25 10:29:06AM, Community Support for Fedora Users wrote: snip Thank you! I don't however understand why I can see the characters all right (from what I can tell) on chromium-browse

Re: firefox fonts problem since upgrade to F42

On 7/4/25 1:33 PM, home user via users wrote: On 7/4/2025 1:20 PM, Jeffrey Walton wrote: On Fri, Jul 4, 2025 at 2:31 PM home user via users wrote: On 7/4/2025 10:32 AM, Ranjan Maitra via users wrote: Thank you! I don't however understand why I can see the characters all right (from what I c

Re: F42: instructions on setting up hibernate

On 7/4/25 7:08 PM, Ranjan Maitra via users wrote: This appears to be a common issue with Dell laptops, although it seems that usually it doesn't even work the first time. Try running "modprobe -r intel_hid" before hibernating and see what happens. It goes down reliably and comes back only when

Re: F42: instructions on setting up hibernate

On 7/4/25 4:45 PM, Ranjan Maitra via users wrote: And here is one entire cycle after a reboot: so hibernate, wake it back up (using the power button), hibernate with the refusal to hibernate. So, basically, includes a case where we have a successful hibernate after reboot, but an unsuccessful

Re: F42: instructions on setting up hibernate

On 7/4/25 3:30 PM, Ranjan Maitra via users wrote: On Fri Jul04'25 03:06:01PM, Samuel Sieb wrote: The first hibernate works, but then it won't hibernate again? Check the journal, it will tell you why. "journalctl -r" might help. It gives you the log in reverse order, st

Re: F42: instructions on setting up hibernate

On 7/4/25 3:02 PM, Ranjan Maitra via users wrote: Thanks! I thought I got it working, pretty much out of the box, but it only works once per reboot. Here is what happens: Boot the system. Hibernate (systemctl hibernate), system goes down. Press power button, system comes back up. Hibernate,

Re: F42: instructions on setting up hibernate

On 7/4/25 2:33 PM, Patrick Dupre via users wrote: About my issue. I do not want to hibernate, but just suspend. It has been working on my laptop, but not anymore! Then why are you replying on this thread which is about hibernating? -- ___ users maili

Re: F42: instructions on setting up hibernate

On 7/4/25 11:50 AM, Ranjan Maitra via users wrote: Btw, should secureboot be disabled for hibernate to work? Most likely. The kernel won't allow hibernating to (at least unencrypted) swap when it's in secure mode. -- ___ users mailing list -- user

Re: updating grub

On 7/3/25 2:34 PM, Bill Cunningham wrote: OK I see. Sorry to get back so late. The server was not letting me post. REST error or something. I manually erased the rescue entry but now I have no rescue entry. Not even for the new kernel You can reinstall the current kernel or wait until the nex

Re: multiple spaces in bash strings.

On 7/3/25 3:11 PM, home user via users wrote: (replying to several) Thank-you everyone that replied. This is the first bash script I've tried to write in about 8 years. The '$' in front of the variable in the left side of the assignment was definitely an error.  Removing it eliminated an erro

Re: Error connecting to Touchégg daemo

On 7/1/25 12:24 AM, Patrick Dupre via users wrote: Why do I get Jul 1 09:22:39 Sappho touchegg.desktop[3975]: Error connecting to Touchégg daemon: Could not connect: Connection refused Jul 1 09:22:39 Sappho touchegg.desktop[3975]: Reconnecting in 5 seconds... Jul 1 09:22:44 Sappho touchegg.de

Re: suspend

On 7/2/25 12:34 AM, Patrick Dupre via users wrote: What is the opposite of gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 I tired gsettings set org.gnome.settings-daemon.plugins.power sleep-active-ac-timeout 0 but it is not correct. What do you mean by "oppo

Re: teams on fedora

On 6/28/25 5:38 PM, bruce wrote: Oh, so screen sharing.  multi used edit as well?  or single edit, multi view? It's just viewing for the other people. -- ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le

Re: teams on fedora

On 6/28/25 5:11 PM, bruce wrote: Saw your post on sharing for Fedora.  If not too much trouble, could u expand in what this means, how it was handled, etc. Teams lets you share your screen with the other people in a meeting. This works in Fedora using the browser Teams even with Wayland. (I'v

Re: teams on fedora

On 6/28/25 10:34 AM, Marco Moock wrote: On Sat, 28 Jun 2025 18:25:08 +0200 François Patte wrote: It seems that Teams is available for linux. I have found some tuto to install it on fedora, but none has succeeded (no teams rpm available). Microsoft discontinued Teams on Linux. You can use th

Re: postfix setup challenges

On 6/26/25 4:44 PM, Robert Moskowitz via users wrote: I have been working on configuring postfix for local delivery. I tired both: mailx -s "Subject" rgm < testit.txt mailx -s "Subject" rgm@localhost < testit.txt /var/log/maillog shows Jun 26 19:36:52 LX140e-3 postfix/pickup[365674]: 73AF7383

Re: Getting crontab to send an email

On 6/26/25 3:22 PM, Robert Moskowitz wrote: On 6/26/25 6:20 PM, Samuel Sieb wrote: On 6/26/25 3:15 PM, Robert Moskowitz via users wrote: On 6/26/25 6:09 PM, Will McDonald wrote: On Thu, 26 Jun 2025 at 23:05, Will McDonald wrote:     On Thu, 26 Jun 2025 at 22:50, Robert Moskowitz via

Re: Getting crontab to send an email

On 6/26/25 3:15 PM, Robert Moskowitz via users wrote: On 6/26/25 6:09 PM, Will McDonald wrote: On Thu, 26 Jun 2025 at 23:05, Will McDonald wrote: On Thu, 26 Jun 2025 at 22:50, Robert Moskowitz via users wrote: I want to get emails from my Fedora notebook for crontab

Re: Bash: how do I read a file into a variable and keep the line feeds?

On 6/24/25 11:35 PM, ToddAndMargo via users wrote: Bingo!  Thank you! $ x=$(cat abc.txt); echo $x a b c d $ x=$(cat abc.txt); echo "$x" a b c d But your original post had the quotes in the command, so it's a different issue there. -- ___ users m

Re: Bash: how do I read a file into a variable and keep the line feeds?

On 6/24/25 11:22 PM, ToddAndMargo via users wrote: On 6/24/25 11:12 PM, Samuel Sieb wrote: When I tested it, echo wrote out the text exactly as it was in the original file, so I don't know what's going on with yours.  Are you using bash? On this customer's machine $ rp

Re: Bash: how do I read a file into a variable and keep the line feeds?

On 6/24/25 11:14 PM, ToddAndMargo via users wrote: On 6/24/25 11:06 PM, Michael D. Setzer II via users wrote: On 24 Jun 2025 at 22:23, ToddAndMargo via users wrote: Date sent:  Tue, 24 Jun 2025 22:23:49 -0700 To: Community support for Fedora users Subject:    Ba

Re: Bash: how do I read a file into a variable and keep the line feeds?

On 6/24/25 11:10 PM, ToddAndMargo via users wrote: On 6/24/25 10:46 PM, Samuel Sieb wrote: On 6/24/25 10:23 PM, ToddAndMargo via users wrote: Hi All, In my bash script, I want to load a file into a variable and keep the line feeds.     x=$(cat filename) remove all the line feeds. I want $x

Re: Bash: how do I read a file into a variable and keep the line feeds?

On 6/24/25 10:23 PM, ToddAndMargo via users wrote: Hi All, In my bash script, I want to load a file into a variable and keep the line feeds.    x=$(cat filename) remove all the line feeds. I want $x to be exactly the same as filename. This is where I would be using this:     echo "$x" | ma

Re: invalid or incomplete multibyte or wide character

On 6/24/25 8:53 AM, Bob Marčan via users wrote: Same environment, upgrade from 41 to 42. [~]$ fr Error in startup script: couldn't read file "/bin/fr": invalid or incomplete multibyte or wide character [~]$ file /bin/fr /bin/fr: symbolic link to ../share/filerunner/fr [~]$ /usr/share/filerunn

Re: creating install media for Fedora server (42)

On 6/23/25 1:15 AM, Tim via users wrote: Tim: And it can't be mounted. Samuel Sieb: How are you trying to mount it? Plugging it in and trying to mount it like any other USB stick. How exactly and what happened? I ended up burning a DVD and installing from that. So, now, it'

Re: creating install media for Fedora server (42)

On 6/23/25 12:01 AM, Barry wrote: On 23 Jun 2025, at 03:13, Tim via users wrote: Marvel at the blistering write speed!! The speed is because the dd copied the data into kernel buffers and does not wait for those buffers to flush to the USB stick. Seems like people didn't actually look a

Re: creating install media for Fedora server (42)

On 6/22/25 7:00 PM, Tim via users wrote: Is it no-longer possible to use dd to write an install ISO to a flashdrive, or is there something wrong with the ISO (which passes the checksum tests)? If I do this command: [root@rocky fedora42]# dd if=Fedora-Server-dvd-x86_64-42-1.1.iso of=/dev/sdb s

Re: F421notebook stopped recognizing USB drives

On 6/22/25 1:56 PM, Robert Moskowitz wrote: On 6/22/25 4:22 PM, Samuel Sieb wrote: On 6/22/25 1:17 PM, Robert Moskowitz via users wrote: On 6/22/25 3:38 PM, Marco Moock wrote: What does dmesg show? Too much for me to figure out what to look for. Run "sudo journalctl -fa" in

Re: F421notebook stopped recognizing USB drives

On 6/22/25 1:17 PM, Robert Moskowitz via users wrote: On 6/22/25 3:38 PM, Marco Moock wrote: On 22 Jun 2025 15:01 Robert Moskowitz wrote: What may be wrong?  How might I troubleshoot this without rebooting? Did you change something at the kernel? All I was doing was inserting a USB drive, m

Re: Community support?

On 6/17/25 12:30 PM, Marco Moock wrote: Am 17.06.2025 um 12:24:06 Uhr schrieb ToddAndMargo via users: Thank you for the explanation. I will ask zoho tech support about it. They can't do anything about that because the message is being altered by the fedora mailing list system. This behavior

Re: local network

On 6/17/25 12:51 AM, Patrick Dupre via users wrote: If you've set B and C to static addresses in the 10.40.0.0 subnet, then obviously you have to change one or the other. The bridge doesn't have a gateway or DNS, that's a setting for the clients. The bizarre thing is that I cannot switch the b

Re: local network

On 6/17/25 12:27 AM, Patrick Dupre via users wrote: On 6/16/25 2:38 PM, Patrick Dupre via users wrote: On 6/16/25 2:11 PM, Patrick Dupre via users wrote: OK, Now it is working with Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.

Re: local network

On 6/16/25 11:44 PM, Patrick Dupre via users wrote: I don't understand what you mean about the ports. Whatever those are, they shouldn't be configured. Maybe, but I dod not configure any thing on that side. It is done automatically by fedora The only option that I se is to disable the interfac

Re: local network

On 6/16/25 7:37 PM, ToddAndMargo via users wrote: Although the network manager is "suppose" to do this (or something similar), I discovered the following corrected the problem:     "#" means as "root"     # systemctl restart NetworkManager.service If you run it as a user, systemctl will promp

Re: local network

On 6/16/25 2:11 PM, Patrick Dupre via users wrote: OK, Now it is working with Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 0 0 enp0s20f0u11 0.0.0.0 192.168.1.1

Re: local network

On 6/16/25 2:38 PM, Patrick Dupre via users wrote: On 6/16/25 2:11 PM, Patrick Dupre via users wrote: OK, Now it is working with Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 0

Re: local network

On 6/16/25 12:25 PM, Patrick Dupre via users wrote: On 6/14/25 11:28 AM, Patrick Dupre via users wrote: Hello, I tried to fix a small issue that I have. PC A is connected to internet through a USB port. This PC A has 2 RJ45 cards, connected to 2 PC: B and C. Both interface are in shared to o

Re: local network

On 6/15/25 4:27 PM, Patrick Dupre via users wrote: 1) I cannot configure properly manually my interfaces on PC A, ie. enp1s0 and enp2s0 I do not know why. I tried 10.42.0.1 and 10.42.0.2 They can't be in the same subnet unless they are bridged somewhere. And you won't have the forwarding and

Re: local network

On 6/15/25 12:32 PM, Samuel Sieb wrote: On 6/15/25 1:42 AM, Patrick Dupre via users wrote: PC A is connected to internet and it is fine. device enp0s20f0u11 It is in automatic setting. This PC has 2 ethernet cards By default   enp1s0 (connected to PC B) and enp2s0 (connected to PC C) If I

Re: local network

On 6/15/25 1:42 AM, Patrick Dupre via users wrote: PC A is connected to internet and it is fine. device enp0s20f0u11 It is in automatic setting. This PC has 2 ethernet cards By default enp1s0 (connected to PC B) and enp2s0 (connected to PC C) If I understand PC A run as a router. By default (sh

Re: local network

three quads PC-B PC-C match each other, & don't match the top half). Samuel Sieb: You misunderstood the situation. Well, I wouldn't be surprised, but his first paragraph seems to describe what I thought it did (though

Re: local network

On 6/14/25 10:04 PM, Tim via users wrote: USB device 10.42.0.254 | <-- Top half in same IP range | as themselves (first three 10.42.0.1 quads match each other).

Re: local network

On 6/14/25 11:28 AM, Patrick Dupre via users wrote: How can I solve this issue? On PC A: Do I need to switch from shared to other computers to Manual? If Yes how should I configure ? 10.42.1.0 255.255.255.0 Gateway? DNS ? Use "nm-connection-editor" to set the IP address range for each interf

Re: Fedora upgrade to F42

On 6/9/25 2:11 PM, Michael Eager via users wrote: On 6/9/25 1:18 PM, Samuel Sieb wrote: On 6/9/25 12:24 PM, Michael Eager wrote: I followed the standard process to upgrade from F40 to F41:    # dnf system-upgrade download --releasever=41    # dnf system-upgrade reboot System restarted and

Re: Fedora upgrade to F42

On 6/9/25 12:24 PM, Michael Eager wrote: I followed the standard process to upgrade from F40 to F41:   # dnf system-upgrade download --releasever=41   # dnf system-upgrade reboot System restarted and installed new RPMs as expected, upgraded to F41. When I tried to do the same for F42, this did

Re: gparted

On 6/8/25 2:36 PM, Patrick Dupre via users wrote: Subject: Re: gparted On 6/8/25 1:28 AM, Patrick Dupre via users wrote: Thank for the feedback. I did not try because Todd gave an easier option. However, I also have an issue with gnome-terminal For example,it does not "wrok" between 2 fedora

Re: gparted

On 6/8/25 1:28 AM, Patrick Dupre via users wrote: Thank for the feedback. I did not try because Todd gave an easier option. However, I also have an issue with gnome-terminal For example,it does not "wrok" between 2 fedora machines. /usr/bin/gnome-terminal does not open a new terminal (not complai

Re: After f40->f42 upgrade, NAT is not set up.

On 6/6/25 3:45 AM, fed...@eyal.emu.id.au wrote: I recently upgraded f40->f42. Had issues (see my earlier thread) which I "fixed"... While dealing with that other issue I found that while the server was working just fine, other machines (on a wired connection) still cannot access the internet.

Re: After moving to F41, I still cannot use Wayland

On 6/6/25 12:35 PM, Frédéric wrote: I moved to F41 and I still cannot use Plasma with wayland because Gimp and VirtualBox are unusable, in particular because of the mouse. What issues are you having? I've never had a problem with GIMP in the years I've been using Wayland. Although I've been

Re: iso from usb stick

On 5/30/25 7:33 PM, Tim via users wrote: On Fri, 2025-05-30 at 06:52 -0700, ToddAndMargo via users wrote: I have a functioning/bootable USB drive. I want to make an ISO out of it but do not want the extra space included that dd gives I think you'd have to play with sizing: Shrink the partiti

Re: How to setup certs for https access for Fedora 42?

On 5/30/25 3:19 AM, Tim via users wrote: On Thu, 2025-05-29 at 20:05 -0400, Jeffrey Walton wrote: Also see and the section, "Configure a Virtual Host for the domain". When following such instructions, you have to

Re: How to setup certs for https access for Fedora 42?

On 5/27/25 5:10 AM, J.Witvliet--- via users wrote: So, for hobby / home websites, certificates with a short lifespan is ok. For anything else, a decent certificate provider should be used… There is no problem for any site to have a short certificate lifespan and that is going to be required w

Re: iso from usb stick

On 5/26/25 10:07 PM, ToddAndMargo via users wrote: On 5/26/25 9:45 PM, Samuel Sieb wrote: On 5/26/25 9:42 PM, ToddAndMargo via users wrote: On 5/26/25 8:55 PM, ToddAndMargo via users wrote: mkisofs -o /home/kvm/myImage.iso -R -J -input-charset utf-8 ./ CCCOMA_X64FRE_EN-US_DV9 File

Re: iso from usb stick

On 5/26/25 9:42 PM, ToddAndMargo via users wrote: On 5/26/25 8:55 PM, ToddAndMargo via users wrote: mkisofs -o /home/kvm/myImage.iso -R -J -input-charset utf-8 ./ CCCOMA_X64FRE_EN-US_DV9 File ./CCCOMA_X64FRE_EN-US_DV9/sources/install.wim is larger than 4GiB-1. # mkisofs -V "W11 24H2 Rufus" -

Re: How to setup certs for https access for Fedora 42?

On 5/26/25 9:44 AM, Michael D. Setzer II via users wrote: But running certbot run Saving debug log to /var/log/letsencrypt/letsencrypt.log Please enter the domain name(s) you would like on your certificate (comma and/or space separated) (Enter 'c' to cancel): setzco.dyndns.org Requesting a certif

Re: How to setup certs for https access for Fedora 42?

t.org Date sent: Mon, 26 May 2025 11:49:40 +0100 Send reply to: Community support for Fedora users On Mon, 2025-05-26 at 00:23 -0700, Samuel Sieb wrote: If you want a recognized certificate, you either have to buy one or you can use certbot to get a free one from https://letse

Re: I try to install f42....

On 5/26/25 12:28 PM, Peter Boy Uni wrote: On a UEFI boot system you need a dedicated EFI partition with a EFI file system (it has a dedicated partition id) because the system firmware looks for that id and the specific file system. even if there was enough space. Fedora currently needs grub2 to

Re: How to setup certs for https access for Fedora 42?

On 5/26/25 12:41 AM, J.Witvliet--- via users wrote: Or, add the Certificates from the CA (and subCAs) to the webserver. For testing purposes that should be enough. What CA? You need a signed certificate to avoid big browser warnings. -- ___ users ma

Re: How to setup certs for https access for Fedora 42?

On 5/26/25 12:18 AM, Michael D. Setzer II via users wrote: Have been running http on port 8081 for long time with no problem. Tried to do similar with 8443 for https, but would never get connection. ISP blocks port 80 and 443 to regular home machine. ISP did some changes, and I can now connect u

Re: wifi interface not up at boot

On 5/15/25 11:10 PM, Jon LaBadie wrote: $ rfkill list 0: asus-wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blo

Re: Audio not working after updates F42

On 5/14/25 10:10 PM, Frederic Muller wrote: On 15/05/2025 10:39, Eyal Lebedinsky wrote: When this happens to me I used "pulse Audio Volume Control" (pavucontrol) to confirm the correct Configuration and Output Device is set and the volume is reasonable. Eyal pulse Audio Volume Control bash

Re: F42 live hangs at boot

On 5/10/25 12:05 PM, Michael Hennebry wrote: I downloaded Fedora-Workstation-Live-42-1.1.x86_64.iso and followed directions to check the checksum. dd'ed the file to /dev/sdf . At the time, that was a USB adapter for an SD card. cp'ed /dev/sdf to f1.iso . cp copied more than was dd'ed, so I interu

Re: is xroach safe?

On 5/10/25 1:18 AM, Tim via users wrote: Another desktop toy I remember was Meko. It was a kitten that'd chase your mouse pointer around. Then sit down and clean itself when the mouse was idle, and fall asleep. "oneko". That one is in Fedora. -- _

Re: is xroach safe?

On 5/10/25 12:09 AM, ToddAndMargo via users wrote: Hi All, Yes, I am or was 12 years old at one time. Any way to tell if this is infected or just a fun game?  (I used it years ago on Solaris. Total fun.) https://fedora.pkgs.org/41/rpm-sphere-x86_64/ xroach-12.6.97-2474.1.x86_64.rpm.html I r

Re: sub for dump/restore?

On 5/9/25 3:17 AM, Patrick O'Callaghan wrote: On Fri, 2025-05-09 at 10:13 +0200, francis.montag...@inria.fr wrote: On Fri, 09 May 2025 00:50:32 -0700 ToddAndMargo via users wrote: On 5/9/25 12:47 AM, francis.montag...@inria.fr wrote: I don't think so. I made a successful test with a 100M spar

Re: du sparse vs sha256sum confusion

On 5/8/25 5:22 PM, ToddAndMargo via users wrote: On 5/8/25 4:57 PM, Samuel Sieb wrote: On 5/8/25 4:54 PM, ToddAndMargo via users wrote: Fedora 41 borgbackup-1.4.1-1.fc41.x86_64 In my testing an hot to write up I made myself of borg backup, I found something confusing. I backed up three file

Re: du sparse vs sha256sum confusion

On 5/8/25 4:54 PM, ToddAndMargo via users wrote: Fedora 41 borgbackup-1.4.1-1.fc41.x86_64 In my testing an hot to write up I made myself of borg backup, I found something confusing. I backed up three file and restored them (somewhere else). The sha256sum matched the originals but the du's did n

Re: du size question

On 5/7/25 11:37 PM, ToddAndMargo via users wrote: On 5/7/25 9:43 PM, Samuel Sieb wrote: On 5/7/25 8:55 PM, ToddAndMargo via users wrote: So bytes or KB?  If I specify --bytes on the line, I get the apparent file size.  I am after the sparse size. Apparent size defaults to KB. If you don&#

Re: du size question

On 5/7/25 8:55 PM, ToddAndMargo via users wrote: So bytes or KB?  If I specify --bytes on the line, I get the apparent file size.  I am after the sparse size. Apparent size defaults to KB. If you don't specify the units, there are various possibilities that it could be, so you should specify s

Re: recovering back-up.

On 5/6/25 5:38 PM, home user via users wrote: On 5/6/25 6:31 PM, home user via users wrote: More progress. Doing that brings up some files and one directory. There should be multiple directories. If I try to look at the properties of that directory, it says "contents unreadable", and under that

Re: recovering back-up.

On 5/6/25 5:31 PM, home user via users wrote: More progress. Doing that brings up some files and one directory. There should be multiple directories. If I try to look at the properties of that directory, it says "contents unreadable", and under that, "Unknown". I tried opening 2 JPG files; they

Re: recovering back-up.

On 5/6/25 5:13 PM, home user via users wrote: On 5/6/25 6:09 PM, Samuel Sieb wrote: On 5/6/25 5:07 PM, home user via users wrote: On 5/6/25 5:31 PM, Samuel Sieb wrote: On 5/6/25 3:57 PM, home user via users wrote: On 5/5/25 10:15 PM, Samuel Sieb wrote: Try "fdisk -l /dev/sdb". If

Re: sub for dump/restore?

On 5/6/25 2:11 PM, ToddAndMargo via users wrote: On 5/6/25 12:59 PM, Samuel Sieb wrote: If you use btrfs, you can easily do differential (but full) backups whenever you want.  And they are directly mountable and restorable. I am using ext4 everywhere. I have been converting all my ext4

Re: recovering back-up.

On 5/6/25 5:07 PM, home user via users wrote: On 5/6/25 5:31 PM, Samuel Sieb wrote: On 5/6/25 3:57 PM, home user via users wrote: On 5/5/25 10:15 PM, Samuel Sieb wrote: Try "fdisk -l /dev/sdb". If it doesn't show the partition table, then try "gpart /dev/sdb", th

Re: recovering back-up.

On 5/6/25 3:57 PM, home user via users wrote: On 5/5/25 10:15 PM, Samuel Sieb wrote: Try "fdisk -l /dev/sdb". If it doesn't show the partition table, then try "gpart /dev/sdb", then try "fdisk -l /dev/sdb" again. If it shows the partition table, then run &qu

Re: sub for dump/restore?

On 5/6/25 11:16 AM, ToddAndMargo via users wrote: On 5/6/25 2:20 AM, Patrick O'Callaghan wrote: On Mon, 2025-05-05 at 20:29 -0700, ToddAndMargo via users wrote: On 5/4/25 3:53 PM, ToddAndMargo via users wrote: Hi All, I have two servers affected by: restore: : ftruncate: Invalid argument htt

Re: recovering back-up.

On 5/5/25 8:18 PM, home user via users wrote: # gpart /dev/sdb Begin scan... Possible partition(DOS FAT), size(14782mb), offset(3mb) End scan. Checking partitions... Partition(DOS or Windows 95 with 32 bit FAT, LBA): primary Ok. Guessed primary partition table: Primary partition(1)    type: 0

Re: recovering back-up.

On 5/5/25 5:57 PM, home user via users wrote: On 5/5/25 6:31 PM, Samuel Sieb wrote: On 5/5/25 5:08 PM, home user via users wrote: On 5/5/25 5:41 PM, Samuel Sieb wrote: On 5/5/25 3:55 PM, home user via users wrote: Here's a mount attempt: - - - - - # fdisk -l /dev/sdb Disk /dev/sdb: 14.4

Re: recovering back-up.

On 5/5/25 5:08 PM, home user via users wrote: On 5/5/25 5:41 PM, Samuel Sieb wrote: On 5/5/25 3:55 PM, home user via users wrote: Here's a mount attempt: - - - - - # fdisk -l /dev/sdb Disk /dev/sdb: 14.44 GiB, 15504900096 bytes, 30283008 sectors Disk model: Units: sectors of 1 * 512

Re: recovering back-up.

On 5/5/25 3:55 PM, home user via users wrote: Here's a mount attempt: - - - - - # fdisk -l /dev/sdb Disk /dev/sdb: 14.44 GiB, 15504900096 bytes, 30283008 sectors Disk model: Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512

Re: recovering back-up.

On 5/2/25 3:58 PM, home user via users wrote: On 5/2/2025 4:40 PM, Samuel Sieb wrote: never been able to figure out how to manually (from the command line) mount something.  File browsers do that for me nicely. "sudo mount /dev/sdb1 /mnt" Thank-you, Samuel. I was expecting a fo

Re: Must remove a partially installed kernel

On 5/2/25 3:58 PM, Terry Hurlbut wrote: The worst problem I have so far discovered about Fedora 42 is that the DNF updater does not work as it once did. The "updates ready" icon no longer shows, and one attempt I made to update packages with it, ended with a kernel entry in the boot loader (GRUB?

  1   2   3   4   5   6   7   8   9   10   >