round in my case was to update the nic table and edit the IP of the
secondary storage vm. After destroying the system vm, the problem was
solved. From the black box point of view, it seems like there is no
validation if the public IP is already reserved?
Mevludin
Am Freitag, 17. Oktober 2025
Dear all,
after an energy outage I am witnessing a strange behaviour: After both
vms could not start because of (what I think) the
"system.vm.management.ip.reservation.mode.strictness" flag was set on
true and after setting this to false, the vms were able to start,
However, now both VMs hav
: Mevludin Blazevic
Sent: Friday, October 17, 2025 9:08 AM
To: [email protected]
Subject: Console Proxy and Secondary Storage System VM have the same public IP
Dear all,
after an energy outage I am witnessing a strange behaviour: After both
vms could not start because of (what I
Can you destroy one of the system vms ?
Kind regards,
Wei
On Fri, Oct 17, 2025 at 10:09 AM Mevludin Blazevic
wrote:
> Dear all,
>
> after an energy outage I am witnessing a strange behaviour: After both
> vms could not start because of (what I think) the
> "system.vm.management.ip.reservation
GitHub user DaanHoogland closed the discussion with a comment: Cannot ISO to
secondary storage - likely due to system vm not working properly
check if the template for the system vms was succesfully registered. This
should happen automatically yes, but if for instance your secondary storage
GitHub user fmillah closed the discussion with a comment: Cannot ISO to
secondary storage - likely due to system vm not working properly
I am not sure I understand what that means, do you mind pointing me to the
manual, or how do i check if it is registered or not?
>From what I read that p
GitHub user fmillah closed a discussion: Cannot ISO to secondary storage -
likely due to system vm not working properly
Couldn't find a host to validate URL
http://abbabbabababa/iso/AlmaLinux-8.9-x86_64-minimal.iso
I have looked around and it might seem related to the sytem vm not ru
GitHub user DaanHoogland added a comment to the discussion: Cannot ISO to
secondary storage - likely due to system vm not working properly
Is your systemvm template registered ? Do you see new log messages?
GitHub link:
https://github.com/apache/cloudstack/discussions/11123#discussioncomment
GitHub user fmillah added a comment to the discussion: Cannot ISO to secondary
storage - likely due to system vm not working properly
[cid:587544bf-e58b-474f-8dca-3bca3626838a][cid:c3b8df13-4e84-47cb-8ccf-908d5978b27e]
Thank you! That was indeed the case, I could not mount it
I have addressed
GitHub user weizhouapache added a comment to the discussion: Cannot ISO to
secondary storage - likely due to system vm not working properly
can you check if the secondary storage can be mounted on a xen host ?
GitHub link:
https://github.com/apache/cloudstack/discussions/11123
GitHub user DaanHoogland closed the discussion with a comment: console not
working after system vm has been recreated on a different cluster
closed this for lack of interaction, please reopen or open a new item if
applicable.
GitHub link:
https://github.com/apache/cloudstack/discussions
GitHub user sbrueseke closed a discussion: console not working after system vm
has been recreated on a different cluster
# ISSUE TYPE
* Bug Report
# COMPONENT NAME
~~~
Console Proxy
~~~
# CLOUDSTACK VERSION
~~~
4.19.1.2
~~~
# CONFIGURATION
Management server on Ubuntu
GitHub user kapsch-gtanya closed a discussion: Custom System VM template
Hello,
Is it possible to have your custom System VM template in an easy way? For
example, to have another SO, or provision some files.
Thanks!
GitHub link: https://github.com/apache/cloudstack/discussions/10178
stomizing system vm template
and assign it in cloud stack so that whenever virtual router is created, it
uses this custom system vm template
Regards
Ajit Singh
On Mon, Apr 14, 2025 at 5:12 PM Jürgen Gotteswinter
mailto:[email protected]>lid> wrote:
> The template is
Hi Jürgen Gotteswinter
Thanks for the quick response, is there a link available where I can get
the steps for customizing system vm template
and assign it in cloud stack so that whenever virtual router is created, it
uses this custom system vm template
Regards
Ajit Singh
On Mon, Apr 14, 2025 at
to have a custom system vm template with required snmp
modules already installed for monitoring purposes in cloudstack v4.19.1
Regards
Ajit Singh
loud stack using snmp and zabbix and
I have installed required snmp modules and monitoring through zabbix is
working fine.
But if I do a VPC cleanup then a new virtual router is created and all snmp
related steps need to be done again.
Is there a way to have a custom system vm template with requi
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
@sbrueseke
have you fixed the issue ?
GitHub link:
https://github.com/apache/cloudstack/discussions/10521#discussioncomment-12562351
This is an
GitHub user sbrueseke added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
@weizhouapache are you able to reproduce this issue?
GitHub link:
https://github.com/apache/cloudstack/discussions/10521#discussioncomment-12415182
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
> Clusters are in the same pod.
>
> Cluster A root@pc-kvm-1:~# ip route default via 10.10.1.1 dev cloudbr0 proto
> static 10.10.1.0/24 dev cl
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
> @weizhouapache no firewall on hosts
can you also check these steps ?
- on the kvm host (another cluster), run "virsh domdisplay " or "
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
@sbrueseke
can you share some network information of the clusters ?
if possible, please share the output of "ip route" in the CPVM as well
G
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
> i-21-283-VM was created in June this year and last updated on July 16th. Are
> you able to reproduce this issue on your installation? Everything
GitHub user sbrueseke added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
root@pc-kvm-1:~$ virsh domdisplay i-21-283-VM
vnc://10.10.1.21:1
root@v-529-VM:~# ping -c1 10.10.1.21
PING 10.10.1.21 (10.10.1.21): 56 data bytes
64 bytes
GitHub user DaanHoogland added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
@sbrueseke , I converted this to an q&a item. Any updates?
GitHub link:
https://github.com/apache/cloudstack/discussions/10521#discussioncomment-1241
GitHub user sbrueseke added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
i-21-283-VM was created in June this year and last updated on July 16th. Are
you able to reproduce this issue on your installation? Everything worked fine
GitHub user weizhouapache added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
> root@pc-kvm-1:~$ virsh domdisplay i-21-283-VM vnc://10.10.1.21:1
>
> root@v-529-VM:~# ping -c1 10.10.1.21 PING 10.10.1.21 (10.10.1.21): 56 data
GitHub user sbrueseke added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
@weizhouapache no firewall on hosts
GitHub link:
https://github.com/apache/cloudstack/discussions/10521#discussioncomment-12415177
This is an
GitHub user DaanHoogland added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
@sbrueseke are the clusters in the same pod? (I don't think it relevant, but it
might)
is there a recent update involved that changed behaviour, tha
GitHub user sbrueseke added a comment to the discussion: console not working
after system vm has been recreated on a different cluster
Clusters are in the same pod.
Cluster A
root@pc-kvm-1:~# ip route
default via 10.10.1.1 dev cloudbr0 proto static
10.10.1.0/24 dev cloudbr0 proto kernel scope
GitHub user rohityadavcloud added a comment to the discussion: console not
working after system vm has been recreated on a different cluster
cc @nvazquez @weizhouapache @DaanHoogland to help review/triage if it's a
regression or some kind of limitation we should address in next 4.19.2/4
GitHub user kapsch-gtanya added a comment to the discussion: Custom System VM
template
I've tried to make a custom template adding a new script with the appliance
tools from CloudStack, to configure proxy files. It work in storage VM and K8S
nodes. But it doesn't work in Virtual
GitHub user weizhouapache added a comment to the discussion: Custom System VM
template
@kapsch-gtanya
the system template is built by packer
please refer to https://github.com/apache/cloudstack/tree/main/tools/appliance
GitHub link:
https://github.com/apache/cloudstack/discussions/10178
GitHub user kapsch-gtanya added a comment to the discussion: Custom System VM
template
We used to use Oracle Linux as our base distribution. We want to add some
custom files/scripts. We have two option: to update this files/scripts to work
on the current SystemVM or to have a SystemVM with
GitHub user DaanHoogland added a comment to the discussion: Custom System VM
template
@kapsch-gtanya , defining your own systemvms is certainly possible. This is
mainly intended to have your custom upgrades.
>From your question I reads that you want to use another OS. This will requ
June 2024 at 06:30
> To: [email protected]
> Subject: Re: System VM static IPs
> Hi Marty
>
> There is an option from the UI also that I just remembered, When you go to
> the Zones > Physical Network > network Name > Traffic Types Then Add IP
> Range for Publ
Hi Nischal,
You’re pictures are not working.
--
Jimmy
From: Nischal P
Date: Wednesday, 5 June 2024 at 06:30
To: [email protected]
Subject: Re: System VM static IPs
Hi Marty
There is an option from the UI also that I just remembered, When you go to the
Zones > Physical Netw
dicated IP range, on the surface, would just be
> more work than it is worth at this point.
>
> From: Wei ZHOU
> Date: Tuesday, June 4, 2024 at 4:48 PM
> To: [email protected]
> Subject: Re: System VM static IPs
> WARNING: This email originated from outside of t
Date: Tuesday, June 4, 2024 at 4:48 PM
To: [email protected]
Subject: Re: System VM static IPs
WARNING: This email originated from outside of the organization. Do not click
links or open attachments unless you recognize the sender and know the content
is safe.
As Nischal said, currently
to change
the system vm IPs (to a random public ip or specific public ip)
-Wei
On Tuesday, June 4, 2024, Marty Godsey wrote:
> Hello Nischal,
>
> That’s why I ask about reservations; it doesn’t. For example, I destroyed
> and recreated a console proxy yesterday, and when it was r
4.19.0.1 install. If this is not normal behavior, where can I look to
troubleshoot this?
From: Nischal P
Date: Tuesday, June 4, 2024 at 9:51 AM
To: [email protected]
Subject: Re: System VM static IPs
WARNING: This email originated from outside of the organization. Do not click
links or
87-56.domain.com.
> > > Is this able to be changed.
> > >
> > > From: Wei ZHOU
> > > Sent: Tuesday, June 4, 2024 1:29:40 AM
> > > To: [email protected]
> > > Cc: Marty Godsey
> >
I would rather not modify the database for something like this. Although I
would like to see it, it’s not worth modifying the database directly.
Thank you for the responses, everyone.
From: Wei ZHOU
Date: Tuesday, June 4, 2024 at 6:19 AM
To: [email protected]
Subject: Re: System VM
>
> On Tue, Jun 4, 2024 at 12:18 PM Marty Godsey wrote:
>
> > When the system vms boot they are given an IP like
> 22-76-87-56.domain.com.
> > Is this able to be changed.
> >
> > From: Wei ZHOU
> > Sent: Tuesday, June 4, 2024 1:29:
sday, June 4, 2024 1:29:40 AM
> To: [email protected]
> Cc: Marty Godsey
> Subject: Re: System VM static IPs
>
>
> WARNING: This email originated from outside of the organization. Do not
> click links or open attachments unless you recognize the sender and kno
When the system vms boot they are given an IP like 22-76-87-56.domain.com. Is
this able to be changed.
From: Wei ZHOU
Sent: Tuesday, June 4, 2024 1:29:40 AM
To: [email protected]
Cc: Marty Godsey
Subject: Re: System VM static IPs
WARNING: This email
When system vms are destroyed, ACS will recreate new system vms. Mostly new
vms will get the same IPs. However, if the IPs are allocated during the
period, new vms will get different IPs.
In this case, If users do not use wildcard DNS, they have to update the DNS
records.
-Wei
On Tuesday, June
Op 04/06/2024 om 06:29 schreef Marty Godsey:
Hello All,
I want the system VMs always to grab the same IP. Is this possible?
What is it that you want to achieve exactly? Why do you want/need this?
Wido
Hello All,
I want the system VMs always to grab the same IP. Is this possible?
bject: Re: Secondary storage system VM agent state and web UI wrong password
For the SSVM issue this article might help you, specifically check for the
management server IP connectivity on port 8250.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM%2C+templates%2C+Secondary+storage+troubl
rfan
Cloud Infrastructure Engineer | Nebula Systems Sdn Bhd
Email: [email protected]
Website: https://www.nebula-sys.com
-Original Message-
From: Jithin Raju
Sent: Tuesday, 30 April, 2024 12:27
To: [email protected]
Subject: Re: Secondary storage system VM agent state
cause, I have faced
this as well some times.
-Jithin
From: Hanis Irfan
Date: Tuesday, 30 April 2024 at 8:10 AM
To: [email protected]
Subject: Secondary storage system VM agent state and web UI wrong password
I’m currently learning CS and setting up a POC environment.
Two system VMs is
I'm currently learning CS and setting up a POC environment.
Two system VMs is running on the same KVM host in my 3 KVM host cluster.
However, the secondary storage VM Agent state is shown as Connecting.
I've SSH into the secondary storage VM and can assure that it can reach the
Internet and m
Hi,
sorry you didn't get any resolution so far. Did you get any further
with your issue?
Some questions;
Is there a public IP defined in ACS for the VMs?
Do the L2 switches have the same upstream subnet and v(x)lan?
I don't think you need to separate PODs. Not sure what you mean by that though.
O
Hello Community,
There are two clusters in the same zone.
Example
clusterA
clusterB
Currently, the system VMs (CPVM & SSVM) exist in clusterA for both of them.
If we migrate these two system VMs to clusterB, access to the system VMs'
public IP will become unavailable.
Although clust
Hi, Piotr
To migrate the system VMs to another storage, you'll need to stop them
and then use the "Migrate system VM to another primary storage" option
on the UI; or use the MigrateSystemVM API passing a new storage for its
volume in the storageid parameter.
To make all the
Hi,
We migrate resources from the first primary pool to the newly created one.
I'm wondering how to migrate consoleproxy and secondary storage vm between
pools?
So that the newly created ones will also be created in the new pool.
Regards,
Piotr
Hi Wei,
That was it indeed, currently my system vm's are up, and the console proxy
works.
--
Jimmy
Van: Wei ZHOU
Datum: donderdag, 2 november 2023 om 20:03
Aan: [email protected]
Onderwerp: Re: System VM network
Hi Jimmy,
Can you check the global setting "host"?
-W
Hi Jimmy,
Can you check the global setting "host"?
-Wei
在 2023年11月2日星期四，Jimmy Huybrechts 写道：
> Hi,
>
> I’ve changed it now so that my system-vm gets an internal ip as internal
> and external as external IP.
> But the agent state keeps being unknown, when logged in t
Hi,
I’ve changed it now so that my system-vm gets an internal ip as internal and
external as external IP.
But the agent state keeps being unknown, when logged in to one of them I think
I can see why.
The IP for my management server is also an external one as done when I first
created the
Subject: Re: System VM network
Hi Jithin,
Do the system vm’s actually need to communicate with the hosts?
--
Jimmy
Hi Jithin,
Do the system vm’s actually need to communicate with the hosts?
--
Jimmy
From: Jimmy Huybrechts
Date: Thursday, 2 November 2023 at 1:17 AM
To: [email protected]
Subject: Re: System VM network
So I guess yes:
In each zone, you need to configure a range of reserved IP addresses for the
management network. This network carries communication between the
management network which is already
defined on cloudbr0? Should I give the management and KVM host an IP from this
private subnet as well?
--
Jimmy
Van: Jimmy Huybrechts
Datum: woensdag, 1 november 2023 om 20:33
Aan: [email protected]
Onderwerp: System VM network
Hi Team,
I’m trying to built
Hi Team,
I’m trying to built a lab of ACS 4.18 in Ubuntu 22 but I may be looking at the
network and system vm’s the wrong way.
I have a /27 my management server host has an IP out of and my KVM host has an
IP out of lets call this range 192.168.10.0/27 (in reality this is a public
subnet).
No
1:48 AM Rohit Yadav
> wrote:
>
> > Glad it helped Pratik.
> >
> > Regards.
> >
> > Regards.
> >
> > From: Pratik Chandrakar
> > Sent: Tuesday, July 4, 2023 12:42:14 PM
> > To: [email protected]
&g
nt: Tuesday, July 4, 2023 12:42:14 PM
> To: [email protected]
> Subject: Re: Unable to ping System VM in Advanced Zone (without SG)
>
> Hi all,
> Finally, I am able to resolve the issue and especially thank Mr Rohit Yadav
> for his blog https://rohityadav.cloud/blog/clo
Glad it helped Pratik.
Regards.
Regards.
From: Pratik Chandrakar
Sent: Tuesday, July 4, 2023 12:42:14 PM
To: [email protected]
Subject: Re: Unable to ping System VM in Advanced Zone (without SG)
Hi all,
Finally, I am able to resolve the issue and
Hi all,
Finally, I am able to resolve the issue and especially thank Mr Rohit Yadav
for his blog https://rohityadav.cloud/blog/cloudstack-kvm/
I was running Ceph OSD and Cloudstack on the same host and docker was
causing the issue.
On Tue, Jun 20, 2023 at 10:35 AM Pratik Chandrakar <
chandrakarpra
Yes
On Fri, Jun 16, 2023 at 5:19 PM Wei ZHOU wrote:
> Have you configured the vlan tag of public ip range ?
>
> -Wei
>
> On Friday, 16 June 2023, Pratik Chandrakar
> wrote:
>
> > Hi,
> > I am pinging the Public IP. I tried to ping the gateway from CPVM also
> but
> > was unable to connect to th
Have you configured the vlan tag of public ip range ?
-Wei
On Friday, 16 June 2023, Pratik Chandrakar
wrote:
> Hi,
> I am pinging the Public IP. I tried to ping the gateway from CPVM also but
> was unable to connect to the gateway, whereas in the SG-enabled setup, the
> same IP and configuratio
Hi,
I am pinging the Public IP. I tried to ping the gateway from CPVM also but
was unable to connect to the gateway, whereas in the SG-enabled setup, the
same IP and configuration work. I have checked the switch as well and I am
getting the MAC of the System VMs.
Unable to identify this strange iss
Hi,
System vms have multiple IPs, which IP do you ping to?
-Wei
On Thursday, 15 June 2023, Pratik Chandrakar
wrote:
> Hi Wei,
> Switch ports are in trunk mode.
> VM on the same host is also not working even though its agent state is
> showing up.
> I think the Configuration is also correct bec
Hi Wei,
Switch ports are in trunk mode.
VM on the same host is also not working even though its agent state is
showing up.
I think the Configuration is also correct because the same configuration is
working for SG-enabled Zone.
On Thu, Jun 15, 2023 at 3:30 PM Wei ZHOU wrote:
> Hi,
>
> If VMs on
Hi,
If VMs on the same host work, but not on different hosts - this is a
typical issue of network misconfiguration.
Please check if switch ports are trunk mode, hosts and cloudstack network
configurations are correct.
-Wei
On Thu, 15 Jun 2023 at 11:46, Pratik Chandrakar
wrote:
> Hi all,
> In t
Hi all,
In the Advanced Zone-SG Enabled deployment there is no issue but on the
same setup when I deploy Advanced Zone-Without SG, I am not able to ping
System VMs from other client machines/CS hosts. Both Console Proxy and
Secondary storage are UP and agent states are also UP in case Management
Se
re any reason why the /usr/local/cloud/systemvm directory would be
>> missing from the SSVM one one zone but not on an other?
>>
>> Is the directory added during the systemvm creation or is it part of the
>> base system VM template?
>>
>> Both /etc/cloudst
the /usr/local/cloud/systemvm directory would be
> missing from the SSVM one one zone but not on an other?
>
> Is the directory added during the systemvm creation or is it part of the
> base system VM template?
>
> Both /etc/cloudstack-release show: Cloudstack Release 4.17.2 Fri 09 D
Is there any reason why the /usr/local/cloud/systemvm directory would be
missing from the SSVM one one zone but not on an other?
Is the directory added during the systemvm creation or is it part of the base
system VM template?
Both /etc/cloudstack-release show: Cloudstack Release 4.17.2 Fri 09
the issue prevails.
>>>
>>> Antoine Boucher
>>> [email protected] <mailto:[email protected]>
>>> [o] +1-226-505-9734
>>> www.haltondc.com <http://www.haltondc.com/>
>>>
>>> “Data security made simple and affordable”
>>>
>
altondc.com
> [o] +1-226-505-9734
> www.haltondc.com
>
> “Data security made simple and affordable”
>
>
> On Feb 21, 2023, at 00:24, Rohit Yadav wrote:
>
>
> You can destroy these old systemvms or do a stop and start on them.
>
> Regards.
>
>
>
>
&g
de simple and affordable”
>
>
> On Feb 21, 2023, at 00:24, Rohit Yadav wrote:
>
>
> You can destroy these old systemvms or do a stop and start on them.
>
> Regards.
>
>
>
>
> From: Antoine Boucher
> Sent: Tuesday, February 21, 2023 10:40:46 AM
them.
Regards.
From: Antoine Boucher
Sent: Tuesday, February 21, 2023 10:40:46 AM
To: users
Subject: Failed to setup certificates for system vm error on 2nd Zone after
upgrading to 4.17.2
After upgrading my two zone ACS from 4.16.2 to 4.17.2, the system VM (and VRs)
of the first
You can destroy these old systemvms or do a stop and start on them.
Regards.
From: Antoine Boucher
Sent: Tuesday, February 21, 2023 10:40:46 AM
To: users
Subject: Failed to setup certificates for system vm error on 2nd Zone after
upgrading to 4.17.2
After
After upgrading my two zone ACS from 4.16.2 to 4.17.2, the system VM (and VRs)
of the first zone upgraded without issues but the system VMs (s-318-VM and
v-317-VM) of the second zone (Kitchener1) are no longer able to establish
connection with the management server. I have rebooted the host
@Fariborz Navidan , this is VMware...
On Wed, 12 May 2021 at 20:51, Fariborz Navidan
wrote:
> Hello Mike
>
> It is likely that the agent cannot communicate with libvirt. Please check
> the agent log. Also check to see if the libvirt service is active.
>
> On Wed, May 12, 2021, 10:59 PM Corey, M
Hello Mike
It is likely that the agent cannot communicate with libvirt. Please check
the agent log. Also check to see if the libvirt service is active.
On Wed, May 12, 2021, 10:59 PM Corey, Mike
wrote:
> Hi again,
>
>
>
> When I enable the zone my system vms just continue to cycle through a
> d
Yes, the message is self-explanatory:
Unable to find distributed vSwitch dvSwitch0
and you said you are not having dvSwitch0 in your DC- so this does indeed
comes from some TRAFFIC LABEL - so please check your traffic labels for
management and storage and public traffic (guest not being important
Hi again,
When I enable the zone my system vms just continue to cycle through a
deployment and expunge. Only thing I can find in the logs to hint at an issue
is the line below regarding capacity. I don't understand how I can have
insufficient resources...these are 2 Gen 10 blades with (2) 24
Thank you Евгений!
We made it work just as per your proposal.
Regards,
Jordan
-Original Message-
From: Дикевич Евгений Александрович
Sent: Wednesday, April 21, 2021 5:31 PM
To: [email protected]
Subject: RE: [!!Mass Mail]system VM cannot connect to cloudstack?
[X] This
I think you should add both servers (comma separated) and check
management.network.cidr in global parameters.
-Original Message-
From: Yordan Kostov [mailto:[email protected]]
Sent: Wednesday, April 21, 2021 12:55 PM
To: [email protected]
Subject: RE: [!!Mass Mail]system VM
: [email protected]
Subject: RE: [!!Mass Mail]system VM cannot connect to cloudstack?
[X] This message came from outside your organization
Hi.
What do you have in global setting in host variable?
-Original Message-
From: Yordan Kostov [mailto:[email protected]]
Sent: Wednesday
Hi.
What do you have in global setting in host variable?
-Original Message-
From: Yordan Kostov [mailto:[email protected]]
Sent: Wednesday, April 21, 2021 12:13 PM
To: [email protected]
Subject: [!!Mass Mail]system VM cannot connect to cloudstack?
Dear all
: system VM cannot connect to cloudstack?
[X] This message came from outside your organization
Dear all,
I have the following setup:
- 2 x Cloustack MGM servers 4.15 (firewall and selinux disabled) -
10.10.38.13 and 10.10.38.14; (SSVM is 4.15)
- Hypervisor
Dear all,
I have the following setup:
- 2 x Cloustack MGM servers 4.15 (firewall and selinux disabled) -
10.10.38.13 and 10.10.38.14; (SSVM is 4.15)
- Hypervisor XCPNG 8.2
- NFS secondary storage
I brought up a zone and secondary VMs are created just
olks,
>>
>> I am using CloudStack 4.13 with KVM. We are having 2-3 KVM Zones ( Both
>> Basic and Advance Zone ). Somehow systemvm got destroyed for KVM Zones. I
>> tried to re-register the system template.
>>
>> 1- I tried to upload the system VM template via GUI
ate.
>
> 1- I tried to upload the system VM template via GUI and change the same
> name in “router.template.kvm” in global setting but it’s did’t work.
> 2- I tried to register the system VM template using the command on ACS -
>
> /usr/share/cloudstack-common/scripts/stor
Hello Folks,
I am using CloudStack 4.13 with KVM. We are having 2-3 KVM Zones ( Both Basic
and Advance Zone ). Somehow systemvm got destroyed for KVM Zones. I tried to
re-register the system template.
1- I tried to upload the system VM template via GUI and change the same name in
he VMware resources (advanced
> configuration) you have to enable the Zone. If your storage, mounts, and
> networking are all correctly configured the two system VM instances will
> deploy into vCenter automatically by CloudStack.
>
> Make sure that your systemVM Template (vSphere) h
Ajit,
Once you create your Zone with the VMware resources (advanced configuration)
you have to enable the Zone. If your storage, mounts, and networking are all
correctly configured the two system VM instances will deploy into vCenter
automatically by CloudStack.
Make sure that your systemVM
1 - 100 of 315 matches
Mail list logo
