** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/16463680/Xorg.0.log
--
Laptop screen doesn't dpms off when using an external screen (Toshiba M200)
https://bugs.launchpad.net/bugs/210230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/16463682/xorg.conf
--
Laptop screen doesn't dpms off when using an external screen (Toshiba M200)
https://bugs.launchpad.net/bugs/210230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
There you go, I attached the files
--
Laptop screen doesn't dpms off when using an external screen (Toshiba M200)
https://bugs.launchpad.net/bugs/210230
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
Leann,
it's all black if i switch to vc1 after the resume. i must ssh in and
run '#vbetool post' in order to get the screen back.
--
Suspend resumes to a black screen for Intrepid on a 945GM/PM/GMS/940GML laptop
https://bugs.launchpad.net/bugs/293242
You received this bug notification because yo
I'm having the same problem on my desktop with Ubuntu 9.04, 64 bit. It
can not start after suspend. On hibernate I get a black screen, with a
blinking cursor. I can only press the reset button or power off, then
start.
I'm wondering if it even power down at all. the DVD drive is still
working
Public bug reported:
Binary package hint: postfix
postfix Preconfiguring packages ... Preconfiguring packages ...
Preconfiguring packages ... (Reading database ... 96799 files and
directories currently installed.) Preparing to replace libvolume-id1
141-1 (using .../libvolume-id1_141-1.1_i386.deb)
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/26322519/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/26322520/DpkgTerminalLog.txt
--
bug fixes,security updates fail to install
https://bugs.launchpad.net/bugs/371816
You re
Hostname is "Kub1".I will paste the etc/hosts file below:
127.0.0.1localhost
127.0.1.1
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02:
i have the same problem with intel 855GM.
also resume from sleep will result in black screen
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293242
--
[i855] Jaunty - X freezing on intel 855GM - MTRR issue (UXA/EXA)
https://bugs.launchpad.net/bugs/370292
You received this bug notification b
9.04 still have the same problem. ssh in after resume and #vbetool post
no long work in 9.04
--
Suspend resumes to a black screen for Intrepid on a 945GM/PM/GMS/940GML laptop
https://bugs.launchpad.net/bugs/293242
You received this bug notification because you are a member of Ubuntu
Bugs, which i
** Also affects: lyx
Importance: Undecided
Status: New
--
problem with accents in vym and lyx in jaunty
https://bugs.launchpad.net/bugs/333268
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
** Description changed:
Since the last update, I have a problem with accents in vym and lyx
eg lyx or vym characters éèàê gives:
à à à ª ÃÃ
- while it works perfectly in other applications and it works also when I copy
the accents of other applications
+ while it works perfectly
Person to work on this bug?
Or find a patch?
It is very easy to reproduce:
sudo apt-get install lyx vym
and try to put the keyboard with accents
then type the accents in the terminal (for example) and copied or pasted into
lyx vym ...
--
problem with accents in vym and lyx in jaunty
https://bugs
Thanks for the quick response.I edited etc/hostname but not etc/hosts[I'm a
noob at editing config files].KPackagekit kept prompting me to file a bug
report every time this happened so I did.
On Mon, May 4, 2009 at 3:36 PM, Andreas Olsson wrote:
> I suggest you edit your /etc/hosts and replace 00
Yes updates are working fine now.Guess I chose a bad hostname[]during
the install.
Thanks again for the help.My system should be ok as long as ext4 doesnt give
me any problems :-/
On Mon, May 4, 2009 at 10:29 PM, Andreas Olsson
wrote:
> Well, /etc/hostname does sound like the logical file to
i have similar problem and i can ssh in after resume. refer to #293242
--
blank screen after resuming on HP Pavilion dv9533eg
https://bugs.launchpad.net/bugs/290697
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
i've the similar problem with the latest kernel refer to #293242
--
dell xps 1330 black screen on resume for ram
https://bugs.launchpad.net/bugs/261021
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
i've the same problem too on my laptop panasonic cf-r3. i can also ssh in and
exec
#vbetool post
then switch to vc1 (ctl-alt-f1) and back to vc7(clt-alt-f7) then the screen
come back
here's my #lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to
I/O Controller
my notebook is panasonic cf-r3 and i also have this problem on 8.10 with kernel
2.6.27-7. it happens everytime after suspend and resume, even if i blacklist
the video module.
it works fine if i boot with kernel 2.6.24-21(the old kernel of 8.04)
note: i am using third-party pcc-acpi driver from h
i just tried without loading the pcc-acpi driver(it used to adjust my
laptop's brightness).
brightness still at minimum after resume with kernel 2.6.27-7. normal
with kernel 2.6.24-21
--
toshiba laptop brightness not adjustable after hibernation
https://bugs.launchpad.net/bugs/102099
You receive
+1 for me
the workaround is good and we can use a script ...
But when i do enable Recent Documents, all documents that i accessed when it
was disabled, are visible. So i must clear them out again…. this is a big bug
for me...
--
Request to add option to disable 'Recent Documents' lists.
https:
Ditto, +1 intrepid amd64bit
--
package libamdxvba1 None [modified: /var/lib/dpkg/info/libamdxvba1.list] failed
to install/upgrade: trying to overwrite `/usr/lib32/libAMDXvBA.so.1.0', which
is also in package xorg-driver-fglrx
https://bugs.launchpad.net/bugs/287159
You received this bug notifica
I have the same problem as this. Who do I contact if it's not a major
security risk as mentioned?
--
Home Huser Restore donot open on Ubuntu 8.04 Hardy Heron 64 bit
https://bugs.launchpad.net/bugs/231294
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct
Martin Bergner wrote:
> It was a bad decision to promote hubackup (which works in most cases)
> and hurestore as a main backup tool since they are not finished. I tried
> to help Sivan getting hurestore to work, but didn't succed.
>
> Maybe someone else has a better idea, so I will create some back
Public bug reported:
Binary package hint: msttcorefonts
Attempt to install as part of ubuntu restricted package -- everything
else installed alright
ProblemType: Package
Architecture: amd64
DistroRelease: Ubuntu 8.10
ErrorMessage: subprocess post-installation script returned error exit status 1
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18356981/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/18356982/DpkgTerminalLog.txt
--
package msttcorefonts 2.5 failed to install/upgrade: subprocess
post-installation scrip
The same bug for me with my geforce 4
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/16894037/lspci-vvnn.log
--
Monitor stuck in low resolution (nvidia issue probably)
https://bugs.launchpad.net/bugs/252033
You received this bug notification because you are a member of U
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/16894046/xorg.conf
--
Monitor stuck in low resolution (nvidia issue probably)
https://bugs.launchpad.net/bugs/252033
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/16894064/Xorg.0.log
--
Monitor stuck in low resolution (nvidia issue probably)
https://bugs.launchpad.net/bugs/252033
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Does that mean the bug will not be fixed for ubuntu 8.04.1 ?
--
Serial Wacom tablet fails to return from ACPI suspend to RAM
https://bugs.launchpad.net/bugs/152187
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing l
Public bug reported:
Binary package hint: vinagre
When a password content accent (éàè) we can't login on vnc host
(login failed)
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 8.10
ExecutablePath: /usr/bin/vinagre
NonfreeKernelModules: fglrx
Package: vinagre 2.24.1-0ubuntu1.1
Proc
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/20813295/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/20813296/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/20813297/ProcStatus.txt
--
accent
Same problem on a T61p with a Quadro FX 570 M. The nvidia-glx-173 driver
works fine.
--
[G86GL] Latest NVIDIA drivers: X hangs with blank screen after logout.
https://bugs.launchpad.net/bugs/258357
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
Binary package hint: fast-user-switch-applet
$ lsb_release -rd
Description:Ubuntu jaunty (development branch)
Release:9.04
$ apt-cache policy fast-user-switch-applet
fast-user-switch-applet:
Installé : 2.24.0-0ubuntu7
Candidat : 2.24.0-0ubuntu7
Table de ver
I've nothing specific, I do connect on host , prompt for pasword, I put pwd
tataié and authentication failed!, but i can connect with TightVNC Viewer
version 1.3.9
I've the same problem with ssh on console
my locale:
> locale
LANG=fr_FR.UTF-8
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC
It still exists in the 64-bit version of 2.6.27-11 on my Latitude D630
(NVidia). Same exact symptoms, clean install, except for the use of the
NVidia 177 (tried 173) drivers. It sounds from what I'm reading here
that the system doesn't even get to the point where the video driver
would matter muc
i've trying to figure out why my laptop can only sleep after 9 minutes and i
finally got to this bug report
i am using 8.10
even i didn't enable the gnome-screensaver "off" Activate screensaver when
computer is idle
but i have 8 minutes on Regard the coputer as idle after 8 minute
then all t
The Last update solved the problem
--
problem with accents in vym and lyx in jaunty
https://bugs.launchpad.net/bugs/333268
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Impossible de faire la mise a jour de linux-image-2.6.27-7-generic ^^ En
ayant installer ubuntu a partir de windows... En passant par une
installation normale aucun problème sur cette mise à jour.
I cannot make update of linux-image-2.6.27-7-generic . I setup ubuntu
directly with windows maybe it
Public bug reported:
Since the last update, I have a problem with accents in vym and lyx
eg lyx or vym characters éèàê gives:
à à à ª ÃÃ
while it works perfectly in other applications and it works also when I copy
the accents of other applications
Description:Ubuntu jaunty (develo
*** This bug is a duplicate of bug 356157 ***
https://bugs.launchpad.net/bugs/356157
unsubscribe
On Wed, Apr 8, 2009 at 1:18 AM, Michael Vogt
wrote:
> *** This bug is a duplicate of bug 356157 ***
>https://bugs.launchpad.net/bugs/356157
>
> etting up hotkey-setup (0.1-23ubuntu10) ...
> I
I encountered the same problem.
After some analysis, this is triggered by the package uno-libs3 :
apt-listchanges correctly infers that the package has source-package
"openoffice.org" but unfortunately the version of uno-libs3 (currently
1.4.1+OOo3.0.1-9ubuntu2) doesn't match the version from th
Reproduced + basic analysis of the bad behaviour.
** Changed in: apt-listchanges (Ubuntu)
Status: New => Confirmed
** Summary changed:
- keeps showing openoffice.org entries
+ keeps showing openoffice.org entries (from uno-libs3)
--
keeps showing openoffice.org entries (from uno-libs3)
The debian BTS (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=51) has a
proposed patch for this problem.
Please consider applying the same fix to the ubuntu version.
--
keeps showing openoffice.org entries (from uno-libs3)
https://bugs.launchpad.net/bugs/342889
You received this bug notif
** Bug watch added: Debian Bug tracker #51
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=51
** Also affects: apt-listchanges (Debian) via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=51
Importance: Unknown
Status: Unknown
--
keeps showing openoffice.org entries
i can confirm this bug
release :
---
Description:Ubuntu karmic (development branch)
Release:9.10
kernel : 2.6.31-5-genericx86_64 GNU/Linux
version of cheese
--
cheese:
Installé : 2.27.90-0ubuntu1
Candidat : 2.27.90-0ubuntu1
Table de version :
***
Public bug reported:
Binary package hint: ubuntuone-client
lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
apt-cache policy ubuntuone-client
ubuntuone-client:
Installé : 0.92.0-0ubuntu1
Candidat : 0.92.0-0ubuntu1
Table de version :
*** 0.92.0-0ubun
** Attachment added: ".home.vince..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/30389660/.home.vince..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added: ".home.vince..cache.ubuntuone.log.syncdaemon.log.txt"
http://launchpadlibrarian.net/30389661/.home.v
Public bug reported:
I upgrade to karmic from jaunty and since i can't restore my xorg by the
command :
sudo dpkg-reconfigure -phigh xserver-xorg
if i use this command nothing change in my xorg.conf
Besides, the "xfix" option has disappeared from the recovery-mode
** Affects: xorg
ok so normally, now there is no need to have a xorg.conf. So now, where
are the default configuration file of xorg?? where i can found
documentation about it?
--
impossible to restore xorg
https://bugs.launchpad.net/bugs/414427
You received this bug notification because you are a member of Ubuntu
ok so normally, now there is no need to have a xorg.conf. So now, where
are the default configuration file of xorg?? where i can found
documentation about it?
--
impossible to restore xorg
https://bugs.launchpad.net/bugs/414427
You received this bug notification because you are a member of Ubuntu
Same problem with an U10. Upgrading OBP to 3.31 does not solve the
problem
--
SPARC boot failed: Illegal Instruction
https://launchpad.net/bugs/40119
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
forget my previous update. powering off / powering on the u10 make the problem
diseappeard up to the message
"booting linux..."
Since system is hanged on this message
--
SPARC boot failed: Illegal Instruction
https://launchpad.net/bugs/40119
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubunt
Public bug reported:
I own a Toshiba Portégé M200 tablet PC, when upgrading from dapper to
edgy, tablet input stopped working.
The touchscreen is recognised as a wacom tablet on a serial port.
The xorg output log contains these errors :
(**) Option "Device" "/dev/wacom"
usbDetect
initializing I
Just noticed I got a bunch of those in dmesg
[17179921.648000] ttyS0: LSR safety check engaged!
[17179924.896000] ttyS0: LSR safety check engaged!
[17179931.104000] ttyS0: LSR safety check engaged!
--
Tablet PC Pen input stopped working from dapper to edgy
https://launchpad.net/bugs/66646
--
u
I join a strace of running monodevelop an it crashing
** Attachment added: "strace of the crash"
http://librarian.launchpad.net/4888154/monodevelop_strace.txt
--
Crash of Mono with MonoDevelop
https://launchpad.net/bugs/59406
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
Hello Chris,
I add the same problem.
boot was stuck with Booting Linux...
I actually also removed the 2 old PGX32 i had in my U10.
After this, the installation goes on, without any problem
HTH,
Vincent.
--
sparc64.Installation fails at "Booting Linux..."
https://launchpad.net/bugs/50236
--
I do have the exact same problem (same error in the terminal).
I run edgy x86.
Other mono software (fspot, tomboy, monodoc) seem to run flawlessly.
--
monodevelop crashes on startup
https://launchpad.net/bugs/61125
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.c
Public bug reported:
Binary package hint: konqueror
There is a bug in the CSS parser.
The first style of the CSS is ignored if the css file starts with
---
@charset "utf-8";
...
---
while the bug disappears if there is no line return before the @charset
directive
---
@charset "utf-8";
---
I
Attached : Sample
** Attachment added: "Testcase for the reported bug."
http://librarian.launchpad.net/5077037/bug_testcase_konqueror.tar.bz2
--
CSS Parsing has a bug
https://launchpad.net/bugs/71926
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
I am also experiencing the same problem with an up to date edgy.
--
Cannot start eclipse: libswt-mozilla-gtk-3139.so: undefined symbol:
NS_InitEmbedding
https://launchpad.net/bugs/31889
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bu
I am experiencing the same problem at startup, as stated in other
similar/duplicate bug reports, other mono apps work fine.
This happens with both monodevelop packaged with edgy and a monodevelop
compiled myself, it seems the problem is mono related rather than
monodevelop related.
--
Crash of M
*** This bug is a duplicate of bug 43961 ***
It didn't exist any more on dapper final, then it appeared again in
edgy, but now it works fine.
--
System doesn't completely shutdown
https://launchpad.net/bugs/33775
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com
I am also unable to install/uninstall tor.
--
tor installation error
https://launchpad.net/bugs/66069
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
When starting up and shutting down, usplash is not fullscreen, it is
displayed in a brown box on a black background. It's particularly ugly
(the usplash doesn't adapt to my LCD native resolution).
My LCD screen has a native resolution of 1400x1050 . It is a Toshiba
Portégé M2
---Lock Screen---
Appuyez sur une touche (le programme s'arrêtera ensuite au bout de 10 sec)...
Nothing (except return key release which I deleted)
---Battery State---
Appuyez sur une touche (le programme s'arrêtera ensuite au bout de 2 sec)...
Nothing
---Suspend to RAM---
Appuyez sur une touch
and dmesg gives not special output for any of those which don't work.
--
Special Laptop Keys don't work anymore (Toshiba M200)
https://bugs.launchpad.net/bugs/210222
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
And, by the way:
$ sudo dmidecode -s system-manufacturer
TOSHIBA
$ sudo dmidecode -s system-product-name
PORTEGE M200
$ sudo dmidecode -s system-version
PPM21E-0260Z-GR
--
Serial Wacom tablet fails to return from ACPI suspend to RAM
https://bugs.launchpad.net/bugs/152187
You received this bug no
Public bug reported:
Binary package hint: firefox-3.0
on this site http://www.vk.tv/video the videoś won't start. When i select a
video, the 'player'icon is displayed. after clicking on it, the movie don't
start. Nothing happens
I use ubuntu 8.04
ProblemType: Bug
Architecture: i386
Date: Thu
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/14062698/Dependencies.txt
** Attachment added: "pluginreg.dat.txt"
http://launchpadlibrarian.net/14062700/pluginreg.dat.txt
** Attachment added: "profiles.ini.txt"
http://launchpadlibrarian.net/14062701/profiles.ini.t
Public bug reported:
Binary package hint: firefox-3.0
after 1 or 2 minutes watching firefox shut down.
ProblemType: Bug
Architecture: i386
Date: Sun May 4 07:53:14 2008
DistroRelease: Ubuntu 8.04
NonfreeKernelModules: fglrx
Package: firefox-3.0 3.0~b5+nobinonly-0ubuntu3
PackageArchitecture: i38
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/14188384/Dependencies.txt
** Attachment added: "pluginreg.dat.txt"
http://launchpadlibrarian.net/14188385/pluginreg.dat.txt
** Attachment added: "profiles.ini.txt"
http://launchpadlibrarian.net/14188386/profiles.ini.t
I have this on the computer bug from my father and I do not use
"NetworkManager" the connection is done automatically without the support of
"network manager" so i think it's a firefox bug...
Usb modem sagem fast 800 installed using the forum french
(http://doc.ubuntu-fr.org/modem_sagem_fast_800
see question #9205 for full range of comments
--
no support for nVidia mx 420 videa card
https://bugs.launchpad.net/bugs/139734
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.c
Public bug reported:
This is probably hal/pmount related, but I'm really not sure.
There seems to be a problem mounting partitions.
my /etc/fstab.conf contains those line
/dev/sda1 /media/hda1 ntfs-3g
exec,noauto,defaults,user,uid=vince,locale=en_US.utf8 0 0
/dev/sda3 /media/storage vfat
This might solve "Problem A" (at a first glance, it really seems to
solve it, I'll confirm next time I boot).
it still doens't solve "problem B" though (which doens't seem to be a
mount related problem but rather a lack of configuration capability for
removable ext3 storage).
--
partitions get m
It has been more than 5 hours and still no fix ;)
--
MASTER: Computer will not boot after 2.6.20-14.23 kernel upgrade
https://bugs.launchpad.net/bugs/106063
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing li
Public bug reported:
I'm trying to install Ubuntu 7.10 for your PC. I'm stuck on the Welcome
screen. I can change the language, but no button to proceed to any
further. My screen resolution is 800x600.
ProblemType: Bug
Architecture: i386
Date: Sat Nov 24 22:30:36 2007
DistroRelease: Ubuntu 7.10
E
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/10548199/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/10548200/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/10548201/ProcStatus.txt
--
Instal
** Attachment added: "Screenshot on my 17" LCD"
http://launchpadlibrarian.net/11030216/C%3A%5CUsers%5CPublic%5CPictures%5C2007%5C12%5C2007_12_09%5CIMG_3503.JPG
--
Install stuck on Welcome screen
https://bugs.launchpad.net/bugs/164927
You received this bug notification because you are a membe
Public bug reported:
Previously, by using commands such as
/usr/X11R6/bin/xinput set-button-map stylus 1 3 2 4 5 6
and
/usr/X11R6/bin/xinput set-button-map stylus 1 2 3 4 5 6
It was possible to switch a wacom tablet pen buttons (so that you could get
either middle click or right click, very usefu
Public bug reported:
Most special Keys of my laptop don't work anymore since I switched to hardy
(Clean install) (All of these worked previously)
What works:
Fn-F3 : Suspend to RAM
Fn-F4 : Suspend to Disk
Fn-F6 : Brightness +
Fn-F7 : Brightness -
Numlock and stuff
What doesn't work
Fn-F1 : Loc
Public bug reported:
On hardy
$ lsb_release -rd
Description:Ubuntu hardy (development branch)
Release:8.04
On my laptop, when using an external screen, the laptop screen doesn't
turn off (It's black, but the backlight is still on, and it flickers
from time to time). Even closing the l
Public bug reported:
Binary package hint: nautilus
source-package: nautilus-actions 1.4.1-1 and nautilus 2.22.0(1:2.22.0-0ubuntu3)
nautilus:
Installé : 1:2.22.0-0ubuntu3
Candidat : 1:2.22.0-0ubuntu3
Table de version :
*** 1:2.22.0-0ubuntu3 0
500 http://archive.ubuntu.com hardy/main
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/12822854/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/12822855/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/12822856/ProcStatus.txt
--
nautil
I confirm this bug, it happened when i work on open office writer
--
nautilus crashed with SIGSEGV in IA__g_object_remove_weak_pointer()
https://bugs.launchpad.net/bugs/191114
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
I don't know if it's really the same bug, so i posted here :
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/207370
--
nautilus crashed with SIGSEGV in IA__g_object_remove_weak_pointer()
https://bugs.launchpad.net/bugs/191114
You received this bug notification because you are a member of
Alright, so, to resume what can be found in the Xorg.0.log (because I'd say the
problem is not from X) :
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Modu
Also I forgot to mention, I run feisty now, situation hasn't changed, it
still doesn't work. I'm unable to test it under edgy anymore.
--
Tablet PC Pen input stopped working from dapper to edgy
https://bugs.launchpad.net/bugs/66646
You received this bug notification because you are a member of Ub
Actually, with sufficient permission :
[EMAIL PROTECTED]:/dev# cat ttyS0
cat: ttyS0: Erreur d'entrée/sortie (mean : IO Error)
[EMAIL PROTECTED]:/dev# cat wacom
cat: wacom: Erreur d'entrée/sortie
[EMAIL PROTECTED]:/dev# setserial ttyS0
ttyS0, UART: 16550A, Port: 0x0338, IRQ: 4
[EMAIL PROTECTED]:
Public bug reported:
Binary package hint: nautilus
Nautilus won't allow scrolling with mousewheel while dragging a file.
(on feisty and probably previous versions
Quite easy to reproduce,
take a big folder and open it with nautilus (icon view),
test the mousewheel by scrolling around
select o
** Attachment added: "Dependencies.txt"
http://librarian.launchpad.net/7217589/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://librarian.launchpad.net/7217590/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://librarian.launchpad.net/7217591/ProcStatus.txt
--
Nautil
dupe of
https://launchpad.net/distros/ubuntu/+source/monodevelop/+bug/61125
--
Crash of Mono with MonoDevelop
https://launchpad.net/bugs/59406
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
dupe of
https://launchpad.net/distros/ubuntu/+source/monodevelop/+bug/61125
--
monodevelop won't start
https://launchpad.net/bugs/63212
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I found out what the problem was.
Actually, the problem is that there is a major monodevelop update in
edgy (-> 0.12), but the update doesn't seem to delete the old plugins,
and the old XML plugin doesn't get deleted nor overwritten. Thus causing
the crash.
Solution : Delete the XML plugin manual
~/.config/monodevelop
(it seems that it is being installed by the user, not by root, in fact
it is installed automatically from the software when requested).
--
monodevelop crashes on startup
https://launchpad.net/bugs/61125
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://list
It doesn't work for me either (while it worked in dapper).
Toshiba Portégé M200
nvidia drivers
--
[regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43
https://launchpad.net/bugs/50031
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listi
Public bug reported:
I just updated from edgy to feisty.
The CPU monitor applet reports the following frequencies :
600 Mhz
800 Mhz
1 Ghz
1.2 Ghz
1.4 Ghz
1.6 Ghz (which is the max freq of my CPU)
65.53 Ghz (Well obviously, this one has a little problem).
The problem is probably not with the apple
Public bug reported:
I own a Toshiba Portégé M200 (Intel Centrino, nvidia graphics)
It won't hibernate
# hibernate-disk
Some modules failed to unload: nvidia
hibernate-disk: Aborting suspend due to errors in ModulesUnloadBlacklist (use
--force to override).
# hibernate-disk --force
Some module
1) It happens on my laptop, which is Intel Centrino.
2) There is no overclocking at all, max speed was reported correctly in edgy
prior to change.
3) No, I never twiddled with that.
4) I use the latest ubuntu feisty kernel.
5) Provided
6) I don't have any /etc/default/powernowd
As for the command
1 - 100 of 650 matches
Mail list logo
