Intrepid Ibex Alpha 1 (http://www.ubuntu.com/testing/intrepid/alpha1) appears
to work fine on my hardware (Ubuntu Server install).
12 hours of uptime so far with no crashes.
--
hardy random freeze
https://bugs.launchpad.net/bugs/227882
You received this bug notification because you are a membe
Same boat, I wasn't able to boot beyond whats described. I've attached
the two files though from the following release:
Linux archon 2.6.22-14-server #1 SMP Tue Feb 12 08:27:05 UTC 2008 i686
GNU/Linux
For whats its worth.
Cheers
Joe
** Attachment added: "dme
Second attachment now.
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/16380180/lspci-vvnn.log
--
Kernel panic on install on amd64
https://bugs.launchpad.net/bugs/54020
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
I think I may have the same problem with Intrepid. I get random lockups within
about 20 minutes using Ubuntu or Kubuntu 8.10. I can still SSH in to the box
and don't see any errors in the logs. I just swapped out my Radeon 8500 for an
ancient ATI Rage 128 and I've gotten a good 2.5 hours of upt
Further testing with Intrepid gave me random locks, though it is much more
stable than Hardy. Hardy will lock up unattended. Intrepid requires user
activity before it will lock up, and even then it will run for an hour or so.
I tried swapping out my video card, ATI Radeon 8500, with an ATI Rage
Just in case the post above is not clear, I did not get any lockups
using the ATI Rage 128 card. I used each distribution for the specified
amount of time, then rebooted back to my stable Kubuntu 7.04 when I was
finished.
--
hardy random freeze
https://bugs.launchpad.net/bugs/227882
You received
Public bug reported:
Binary package hint: gnome-nettool
After install ubuntu 8.10. My MS windows network connection not working
any more. Always showing network cable unpluged.
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 8.10
ExecutablePath: /usr/bin/gnome-nettool
Package: gnome-ne
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/19677048/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/19677049/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/19677050/ProcStatus.txt
--
After
Public bug reported:
Binary package hint: acidbase
Here is the info I captured:
A package failed to install. Trying to recover:
Setting up acidbase (1.3.9-2) ...
dbconfig-common: writing config to /etc/dbconfig-common/acidbase.conf
*** WARNING: ucf was run from a maintainer script that uses debc
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/28048258/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/28048259/DpkgTerminalLog.txt
--
acidbase failed to install
https://bugs.launchpad.net/bugs/388805
You received this bug
Tried the above listed kernel as well on my IBM r51. Doesn't fix this
issue at all. I plugged in a usb mouse and it has the same issues as
the mousepad.
--
netbook launcher mouse focus is off
https://bugs.launchpad.net/bugs/368394
You received this bug notification because you are a member of U
The reason that it won't run from startup is because the OSD is on by
default. OSD needs an X display and tpb dies saying it can't open
display. You would think that it would be as simple as following the
instructions in the manual.
-o, --osd=STATE
Show on-screen display fo
Actually I must have been doing something wrong earlier, the -o off
argument works now. I changed /etc/init.d/tpb so that line 16 is
tpb -c /etc/tpbrc -d
instead of
tpb -d
In /etc/tpbrc I set MIXER ON as I have to use OSS to control the mixer
and I set OSD OFF so that it works on boot.
Nope I stand corrected again. Even if you turn off OSD, it still gives
this error.
r...@jgarcia-laptop:~# tpb -o off -m on
Unable to initialize xosd. Running without onsceen display.
Can't open display, X may not be running!
--
init script doesn't launch tpb at startup
https://bugs.launchpad.ne
I am also having this problem. The widget layer will also disappear if I
mouse over the Window List or the Gnome-Do Docky, even if there is
nothing open on the widget layer.
--
Widget layer disappears when interacting with applications within the widget
layer
https://bugs.launchpad.net/bugs/3563
It appears to be caused by the closing of tooltips as well as closing
the notifications.
--
Widget layer disappears when interacting with applications within the widget
layer
https://bugs.launchpad.net/bugs/356374
You received this bug notification because you are a member of Ubuntu
Bugs, which
I have a little bit similar problems with eclipse 3.4 when working with openjdk
1.6.0.
When Eclipse starts and I press New->Project->C++ it crashes:
# An unexpected error has been detected by Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0x7fad9d3ebbc4, pid=7054, tid=1108134224
#
# Java
Public bug reported:
Binary package hint: linux-image-2.6.28-11-generic
The multimedia keys no longer work on this keyboard using a fresh
install of Jaunty. It appears that the kernel identifies this keyboard
as a Classic new Touch, which has no multimedia keys. This is a
regression from intrep
** Changed in: mozilla (Ubuntu)
Status: Incomplete => Fix Released
--
mozilla.bin wurde unerwartet beendet
https://bugs.launchpad.net/bugs/123070
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
e is a /tmp/tmp62d1Q5/ directory, but it's empty.
I'm at a loss. Anybody who has a bright idea will become my new best
friend. Because of this, I can't upgrade flash, so I've lost a bunch of
web functionality, and I just generally feel like a lame-o.
Cheers,
Joe
--
7.04-
*** This bug is a duplicate of bug 357732 ***
https://bugs.launchpad.net/bugs/357732
** This bug has been marked a duplicate of bug 357732
cups always prints with the default page size
--
Page offset printing A4 test page
https://bugs.launchpad.net/bugs/346855
You received this bug notifi
using:
ubuntu 9.04 amd64 (clean install)
mythtv-frontend 0.21.0+fixes19961
nvidia-glx 180.44
This issue was present in Hardy, corrected in Intrepid and resurfaced in
Jaunty. It appears to be Gnome specific, as I cannot duplicate the
issue in kde.
Workaround:
sudo aptitude install compizconfig-
Still present in the second update to Ubuntu 8.04. Ubuntu 8.04.3 will
supposedly be released in about a month or two (07/02/2009). This would
be a good time to just apply the patch and get this bug fixed in Ubuntu
8.04 LTS once and for all. As users have reported, this isn't just a
cosmetic issue f
++-4.3_4.3.2-1ubuntu8_amd64.deb
404 Not Found [IP: 91.189.88.46 80]
I need g++ in order to debug my applicationn written in c++. Why can't I load
the compiler?
/Joe
ProblemType: Bug
Architecture: amd64
DistroRelease: Ubuntu 8.10
ExecutablePath: /usr/sbin/synaptic
Package: synaptic 0.62.1ub
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18569596/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/18569598/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/18569599/ProcStatus.txt
--
Cannot
Public bug reported:
When attempting to install 8.10 Beta of Ubuntu, I selected the "Guided -
Resize SCSI1 (0,0,0), partion #1 (sda) and use freed space" option in
the partitioning tool.
It shows the following percentages by default (based on the 4GB used):
Before: /dev/sda1 99%, Free Space 0%
A
Public bug reported:
i guess i dont have flash installed no video at all or sound .
** Affects: libflash (Ubuntu)
Importance: Undecided
Status: New
--
my ibm think pad will not play you tube videos help fix
https://bugs.launchpad.net/bugs/292937
You received this bug notification
same story here...
and the problem is, it is completely randomly, and that is very annoying!
i've got compiz disabled, got a ati x300
--
Xorg crashes on intrepid ibex and restarts
https://bugs.launchpad.net/bugs/292263
You received this bug notification because you are a member of Ubuntu
Bugs, w
that have discussed and worked on this issue and I'll let
you know how it goes when I try it again.
Regards,
Joe> From: [EMAIL PROTECTED]> To: [EMAIL PROTECTED]> Date: Tue, 14 Oct 2008
22:22:58 +> Subject: [Bug 199455] Re: [fglrx] __driCreateNewScreen_20050727
() from /usr/lib
So and why do I have to open that Terminal. The update-tools allready
requested your password to autherize the installation process. There are two
options for me. In Synaptic there should just be a message window informing
you that something went wrong last time and if synaptic should try to
correc
Public bug reported:
Binary package hint: firefox-3.0
I run Firefox 3.0.1 within Linux UBUNTU 8.04. After an an Ubuntu System
update mostly a number of basic functions and all new functions of
Firefox 3 not longer available. For example alle database functions
missing all well as go-back button,
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/16302094/Dependencies.txt
** Attachment added: "ExtensionSummary.txt"
http://launchpadlibrarian.net/16302095/ExtensionSummary.txt
** Attachment added: "pluginreg.dat.txt"
http://launchpadlibrarian.net/16302096/pluginr
I don't know how this can be considered fixed. It is certainly still a
problem in Hardy. I can't really do a RHEL4 install without waiting 10+
minutes for a timeout on an alternate console so I can get in and echo a
command to change the ide settings for a device. That's a pretty hefty
work arou
@johnlu: Have you tried Bryce's suggestion here:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/141551/comments/39
--
DRI lockup with AGP on ati (mobility radeon rv350)
https://bugs.launchpad.net/bugs/141551
You received this bug notification because you are a member of Ubu
Bryce's suggestion works for me. I put a fresh install of Ubuntu 8.04.1 on my
computer (homebuilt with a Gigabyte 7ZXE mobo), added an AGPMode of 2 to
xorg.conf, took the "fail-safe default" values in the BIOS, which set the AGP
speed to 2x. No mysterious hangs in 9 hours of uptime last night.
I think the problem my computer has is definitely the same as Bug #141551
Bryce Harrington's suggestion here:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/141551/comments/39
works for me as reported here:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+b
Here's the xorg.conf and Xorg.0.log from my Fiesty hard disk install.
As I mentioned in the other bug, I get months of uptime from this
install.
** Attachment added: "logs.zip"
http://launchpadlibrarian.net/17543428/logs.zip
--
DRI lockup with AGP on ati (mobility radeon rv350)
https://bugs.l
I posted logs of my experience with Intrepid Alpha 5 over here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/227806/comments/9
--
DRI lockup with AGP on ati (mobility radeon rv350)
https://bugs.launchpad.net/bugs/141551
You received this bug notification because you are a member of Ubuntu
By "no archives", I take it you want them unzipped. . .
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/17555118/Xorg.0.log
--
DRI lockup with AGP on ati (mobility radeon rv350)
https://bugs.launchpad.net/bugs/141551
You received this bug notification because you are a member
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/17555125/xorg.conf
--
DRI lockup with AGP on ati (mobility radeon rv350)
https://bugs.launchpad.net/bugs/141551
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
My bug, #227882 has been marked a duplicate of this one, so I will copy my
latest findings over here.
I have an ATI 8500 video card. I get random hangs with Gutsy and Intrepid
(though Intrepid is more stable).
If I disable DRI in xorg.conf, both Gutsy and Intrepid appear to be stable
(over 8
*** This bug is a duplicate of bug 227806 ***
https://bugs.launchpad.net/bugs/227806
If I use my ATI 8500 card and turn off DRI in xorg.conf, I don't have
any problems with hangs (Intrepid uptime over 8 hours!), so my problem
is probably similar to Bug #141551
--
hardy random freeze
https://
Public bug reported:
Binary package hint: mpd
Description:Ubuntu intrepid (development branch)
Release:8.10
Setting up mpd (0.13.2-1ubuntu1) ...
* Starting Music Player Daemon mpd
* creating /var/lib/mpd/tag_cache...
No pro
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/17881432/Dependencies.txt
** Attachment added: "DpkgTerminalLog.gz"
http://launchpadlibrarian.net/17881433/DpkgTerminalLog.gz
--
package mpd 0.13.2-1ubuntu1 failed to install/upgrade: subprocess
post-installation scrip
OK; I'll try and test the latest image out on the server when I get a chance
and re-open if required or update.
Cheers
Joe
On Thu, Jun 26, 2008 at 6:31 AM, Jean-Baptiste Lallement <
[EMAIL PROTECTED]> wrote:
> We are closing this bug report because it lacks the informatio
I am new to Ubuntu. I just installed Ubuntu version 8.04. I have the
same issue. I have a SATA and an IDE drive. Ubuntu installed GRUB on the
IDE, but my bios said to boot off of the SATA first. I was able to fix
it by switching the BIOS setting to boot off of the IDE before the SATA.
/Joe
Public bug reported:
Ubuntu Hardy 2.6.24-19-server
I have a system with mixed pata and sata drives, the boot drive is the
first sata drive (sdb1). sda1 is a 160G partition on a pata drive, sdb1
is a 10G partition on an sata drive. Parted and cfdisk both report the
sizes correctly, however, If I
** Attachment added: "dmesg output"
http://launchpadlibrarian.net/15469898/dmesg
--
pata drive size being confused with sata drive
https://bugs.launchpad.net/bugs/241552
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I had headphone jack working in 7.10. Upgraded to 8.04 today. Everything
works very nicely but headphone jack does not have output and does not
mute the internal speakers. Satellite A135 s4457. I hesitate to use
older advice that fixed the bug in gutsy.
--
headphones on laptop don't mute laptop s
*** This bug is a security vulnerability ***
Public security bug reported:
Changed the password for a non-privileged user with gnome-about-me.
Then changed that user's privileges to allow 'administering the system'.
When logging on again as that user, a dialog box says that nm-applet
needs access
Fedora 9 fixes my problem (so far, fingers crossed)
https://bugs.launchpad.net/ubuntu/+bug/227882
--
Linux kernel 2.6.24-12 lockup
https://bugs.launchpad.net/bugs/204996
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
I installed Fedora 9 on this same machine (different 40Gb hard drive) and have
had no problem with freezes in over an hour of uptime. This is much better
than the ~10 minute uptime I was getting with Hardy.
I know it uses a newer kernel and patches (2.6.25-14.fc9.i686 vs.
2.6.24-4.6-generic for
Worked for me too! Only, now I have to select kernel 14 when I reset the
computer. Anyone know how to set the kernel as default?? Thanks!
On Tue, Aug 12, 2008 at 4:01 PM, Robby Minick
<[EMAIL PROTECTED]>wrote:
> I updated 4 machines yesterday and had no issues at all by using
> kernel 14.
>
>
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/16025745/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/16025746/DpkgTerminalLog.txt
--
package twiki 1:4.1.2-3.1ubuntu1 failed to install/upgrade: subprocess
post-removal scr
Public bug reported:
Binary package hint: twiki
* Starting web server apache2
apache2: Syntax error on line 185 of /etc/apache2/apache2.conf: Syntax
error on line 1 of /etc/apache2/mods-enabled/xmlrpc.load: Cannot load
/usr/lib/apache2/modules/mod_xmlrpc.so into server:
/usr/lib/apache2/modules/
I just ran across this problem too.
Ubuntu 8.04
I had previously been using mod xmlrpc. Tonight I installed the twiki
package along with it's requirements. The installation failed with the
same message as in the previous message "... Cannot load
/usr/lib/apache2/modules/mod_xmlrpc.so into server:
Oh yeah, I'm updating from 7.10 to 8.04. Everything else seems to be
exactly the same as Ron's case. Thanks guys, I hope we can figure this
out!
Joe
--
Feisty to Gutsy upgrade hangs on Generating locales
https://bugs.launchpad.net/bugs/249258
You received this bug notification becau
I have this exact same problem as well! Please help! Is there a way to
recover Ubuntu 7.10?? I need my system back asap! Thanks.
--
Feisty to Gutsy upgrade hangs on Generating locales
https://bugs.launchpad.net/bugs/249258
You received this bug notification because you are a member of Ubuntu
I saw that the original bug was fixed with the 2.6.25 kernel being prepared
for Intrepid Ibex 8.10. I followed the instructions posted in this comment:
https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/204996/comments/192
I've got over 6 hours of uptime in Hardy with the 2.6.25 kernel, s
*** This bug is a duplicate of bug 227806 ***
https://bugs.launchpad.net/bugs/227806
I tested the 2.6.24-20-generic kernel and it does not solve my hang.
Interesting tidbit, I could not update the kernel using my ATI 8500 video card.
Not enough uptime. Change to my Rage 128 and viola! No
, hdb and so on.
I attatch /var/log/fsck/checkfs for the corrupt and the OK kernel.
The other attached files
( uname-a.log, version.log, dmesg.log and lspci-vvnn.log )
was generated when I had booted with an OK kernel.
Please tell me if you need more info.
/ JoE
** Affects: ubuntu
** Attachment added: "Se description above"
http://launchpadlibrarian.net/15096244/Kernel2.6.24Bug.tar.gz
--
Ubuntu8.04 kernel 2.6.24-18 can't recognize HD-partitions
https://bugs.launchpad.net/bugs/238023
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
Hi !
I still can't boot the new kernel. Is there any instruction ?
I have tried by changing hdX to sdX in /boot/grub/device.map and in
/etc/fstab but it is not helping.
Is any more hacking needed ? I know some other people that also has problem.
/ Johan
--
Ubuntu8.04 kernel 2.6.24-18 can
this cheap bug still in 8.10
--
Arrow keys are incorrectly mapped in vim
https://bugs.launchpad.net/bugs/62980
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu
*** This bug is a duplicate of bug 96676 ***
https://bugs.launchpad.net/bugs/96676
a stupid bug I can see reports on 2006, now still in 8.10, ubuntu would
be better renamed as ubugtu!
--
control-cursor-key regression in vim
https://bugs.launchpad.net/bugs/89660
You received this bug notifica
Public bug reported:
Error found while installing Crunchbang release 8.10
Traceback (most recent call last):
File "/usr/lib/ubiquity/bin/ubiquity", line 229, in
main()
File "/usr/lib/ubiquity/bin/ubiquity", line 224, in main
install(args[0])
File "/usr/lib/ubiquity/bin/ubiquity", l
** Attachment added: "/var/log/syslog and /var/log/partman included"
http://launchpadlibrarian.net/20948990/syslog%2Bparman.tar.gz
--
Grub Installer Failed
https://bugs.launchpad.net/bugs/314383
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
Binary package hint: evolution
I can successfully sync events at specific times (eg. 1:30p) between
google calendar and evolution calendar using the "google" sync. wizzard.
However, events marked as "All day" in google calendar don't sync to
evolution at all. And, events in
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/21146121/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/21146122/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/21146123/ProcStatus.txt
--
caldev
*** This bug is a duplicate of bug 183846 ***
https://bugs.launchpad.net/bugs/183846
I've added my observations to the conversation thread for the existing bug
report. Thank you for your help keeping the bug reports consolidated. -Joe
On Tue, Jan 13, 2009 at 4:30 AM, Pedro Villavic
I can successfully sync events at specific times (eg. 1:30p) between
google calendar and evolution calendar using the "google" sync. wizzard.
However, events marked as "All day" in google calendar don't sync to
evolution at all. And, events in evolution marked as "All Day Event"
appear in google ca
d line.
I'm not very good at computers so it's hard to understand complicated things
for me.
Is there something that I can do about this thing?
I did uninstall ubuntu-doc but anything didn't change at all.
Best regards,
joe.
--
Couldn't open display computer:/// Places Comput
Hi,
I am seeing similar behavior as well to that described in other comments
for this bug report.
I am currently running Ubuntu 8.10 Intrepid as a dualboot on my
Panasonic Let's note CF-W4.
In my case I get no response whatsoever from my associated hotkeys, however
that I can deal with.
More
Thought I would just attach a copy of the contents of my /etc/apt in
case anyone was interested. If anyone has any suggestions, I'm all
ears.
Cheers,
Joe
** Attachment added: "aptCopy.tar.gz"
http://launchpadlibrarian.net/23898773/aptCopy.tar.gz
--
7.04->7.10 "U
Sorry, that's not it. I ran it again, copying (except for the typo in
the do-release-upgrade line) the text word for word. Same error
message.
I _do_ find it weird that I don't have a prerequists-sources.list file
in /etc/apt/sources.list.d
Instead, I have a whole bunch of old dapper and edgy r
Hi, I have latest patches till 02/28/2009 and try to build mips cross
compiler on gcc-3.4.5-glibc-2.3.6 and got exactly the same error on
Ubutun 8.10:
In function ‘open’,
inlined from ‘collect_execute’ at
/home/jdai/Download/crosstool-0.43/build/mipsel-unknown-linux-gnu/gcc-3.4.5-glibc-2.3.6/
I want to bring to the attention of the package maintainer of gdm in
Ubuntu that this bug has yet to be fixed in Ubuntu Hardy 8.04.2 as of
Feb. 28, 2009, at least on the i386 version and probably the other
platforms. Please don't forget about all of the Hardy users who will be
on this version for s
The fix has not been released for Hardy, therefore this bug is still
open as far as Hardy is concerned.
** Changed in: gdm (Ubuntu)
Status: Fix Released => Confirmed
--
GDM error on shutdown/restart
https://bugs.launchpad.net/bugs/249039
You received this bug notification because you are
On Mon, 2009-03-02 at 09:36 +, Sebastien Bacher wrote:
> that's only a warning printed for some seconds on restart or stop not
> sure that's worth a stable update
I disagre. GDM is a main Ubuntu package, so it merits that the fix be
applied. From what others have reported, this also affects s
omasz's idea is implemented and works.
Cheers,
Joe
>>Working solution:
>>1. rm -rf /tmp/tmp*
>>2. run do-release-upgrade (it will fail)
>>3. rm /etc/apt/sources.list.d/prerequists-sources.list
>>4. cd /tmp/(some random string)
>>4. edit prerequists-sources.list
** Attachment added: "CoreDump.gz"
http://launchpadlibrarian.net/22418453/CoreDump.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/22418454/Dependencies.txt
** Attachment added: "Disassembly.txt"
http://launchpadlibrarian.net/22418455/Disassembly.txt
** Attachm
Public bug reported:
when installing mythbuntu. during an update & upgrade
ProblemType: Package
Architecture: i386
Dependencies:
libgcc1 1:4.3.2-1ubuntu11
gcc-4.3-base 4.3.2-1ubuntu11
findutils 4.4.0-2ubuntu3
libc6 2.8~20080505-0ubuntu7
DistroRelease: Ubuntu 8.10
ErrorMessage: subprocess pre
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/22977208/DpkgTerminalLog.txt
--
package libc6 2.8~20080505-0ubuntu7 failed to install/upgrade: subprocess
pre-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/332897
You received this bug
Public bug reported:
Binary package hint: cups
Description:Ubuntu jaunty (development branch)
Release:9.04
After a fresh install of jaunty alpha5, the test pages of both of my
laser printers have an additioal 18mm offset at the top. A Brother
inkjet still works correctly. When I use
I have to correct myself, I forgot switching to A4 after installing the
old PPD files, they are also showing the same offset with Jaunty. Here
is the Kyocera PPD from my Notebook (Intrepid) which prints correctly
and the Jaunty PPD.Intrepid
** Attachment added: "Kyocera_810.ppd"
http://launchpa
** Attachment added: "Kyocera_904a.ppd"
http://launchpadlibrarian.net/24285196/Kyocera_904a.ppd
--
Page offset printing A4 test page
https://bugs.launchpad.net/bugs/346855
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
I can also confirm that the workaround works for me. Thanks jshein!
--
[jaunty] no wlan with Acer Aspire One 110L and not activatable
https://bugs.launchpad.net/bugs/350352
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Julio Lajara's solution worked for me. I used the latest version available
which works well
Thanks
--
npviewer.bin crashed with SIGSEGV
https://bugs.launchpad.net/bugs/178038
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
I tried the workaround but my sound is still muted on reboot.
--
[Jaunty] Sound card outputs start muted after recent updates to use pulseaudio
https://bugs.launchpad.net/bugs/315809
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
Not sure if this helps but this only happens on a reboot. If I shutdown
then restart the sound is OK.
--
[Jaunty] Sound card outputs start muted after recent updates to use pulseaudio
https://bugs.launchpad.net/bugs/315809
You received this bug notification because you are a member of Ubuntu
Bugs
I'm getting the WPA2-Enterprise error as well, with the latest version
of Kubuntu Jaunty. Using the plasmid, not sure what else to do. Seems to
never connect.
--
[iwlagn] networkmanager applet cannot connect to WPA2 home network (intel 4965)
https://bugs.launchpad.net/bugs/348275
You received thi
I got a hang after 58 minutes of uptime with the Intrepid Alpha 5 Live CD.
I installed openssh server and was able to get the logs and a screenshot of top
running. After the hang, top reports that X takes up 97% of the CPU. Again,
this post:
https://bugs.launchpad.net/ubuntu/+source/xserver-xor
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/30012057/Dependencies.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/30012060/DpkgTerminalLog.txt
--
ia32-libs did not install from update manager
https://bugs.launchpad.net/bugs/410394
You
Public bug reported:
Binary package hint: ia32-libs
This update failed to install with the update manager. I did not save
any of the error report so this is all I have at this time. If it occurs
again, I will copy and forward the error message on.
ProblemType: Package
Architecture: amd64
DistroR
To have these quirks applied automatically, you must change the relevant
fdi file. (/usr/share/hal/fdi/information/10freedesktop/20-video-quirk-
toshiba.fdi)
BACK UP THE FILE BEFORE MAKING ANY CHANGES
add these lines just before the line
true
false
or just apply the attached patch.
s
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/29346363/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/29346364/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/29346365/ProcStatus.txt
--
unable
Public bug reported:
Binary package hint: yelp
Page 1 (Choose printer):
{'cups_dest': ,
'cups_instance': None,
'cups_queue': 'CanonMX330',
'cups_queue_listed': True}
Page 2 (Check printer sanity):
{'cups_device_uri_scheme': u'smb',
'cups_printer_dict': {'device-uri': u'smb://MSHOME/JOESDELL/C
Same issue with Verizon and EVDO. I can connect fine if I setup my own
pppd config file and chat script and run it from the command line.
r...@jgarcia-laptop:/etc/ppp/peers# lsusb -v
Bus 001 Device 004: ID 106c:3711 Curitel Communications, Inc.
Device Descriptor:
bLength18
b
I just used the instructions from here:
http://linux.com/archive/feature/52729
--
UMTS Modem: network manager / pppd does hang up immediately after successful
connect
https://bugs.launchpad.net/bugs/391608
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
Public bug reported:
Binary package hint: checkinstall
Description:Ubuntu 8.04.3 LTS
Release:8.04
checkinstall1.6.1-5ubuntu1
It is always set to the output of "dpkg-architecture -qDEB_HOST_ARCH".
This diff corrects it:
--- /usr/bin/checkinstall 2007-11-18 08:24:30.
1 - 100 of 3249 matches
Mail list logo
