Has someone tried to compile the b44 module ?
I tried, but I didn't success :-(
--
Unreliable network connection with B44 driver
https://bugs.launchpad.net/bugs/279102
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
I confirm this bug on my laptop.
Disconnect under heavy load. I don't use "radeon" driver, nor Compiz.
I didn't notice that bug under 8.04.1
lspci | grep BCM
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
lspci | grep Graphic
00:02.0 VGA compatible controller: In
As I said before, I'm running Xubuntu with no Compiz effects / desktop
effects, and i'm not using radeon/nvidia driver (because I have an Intel
card), but I have the problem.
--
Unreliable network connection with B44 driver
https://bugs.launchpad.net/bugs/279102
You received this bug notification
kmilo is out for hardy (8.04) in a version more recent than the gutsy one.
http://packages.ubuntu.com/hardy/utils/kmilo
Maybe you could try (I'm not with my computer right now, so I can't test it,
but I have the same problem !)
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/1
Don't try the method I wrote in my last message, it doesn't work...
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Kubuntu
Team, which is a bug assignee.
--
kubuntu-bugs mailing list
[EMAIL PROTECTED]
http
Does somebody know a patch for a 64bit architecture ? I would like it to
be fixed **before** Hardy's release !
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
If like me, you are on a 64-bit architecture (so you can't use zs's .deb), or
if you don't trust zs, you can download the old package (from Feisty) here
http://packages.ubuntu.com/feisty/utils/kmilo
and with the "sudo dpkg -i the_package_name.deb"
It works
--
KMilo/Volume Hotkeys regression
http
I had a problem in Feisty (still present in Gutsy): my /etc/hdparm/hdparm.conf
wasn't executed at startup. I had to do
sudo update-rc.d hdparm defaults
to make /etc/init.d/hdparm be run at each startup. Don't know if it's a bug,
but when there is a file called /etc/hdparm/hdparm.conf, I expect it
@troycable: What is the result with my method (Feisty package) ?
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Kubuntu
Team, which is a bug assignee.
--
kubuntu-bugs mailing list
[EMAIL PROTECTED]
https:/
Is the socketbind's patch working for 64 bits architecture ?
Thanks
--
KMilo/Volume Hotkeys regression
https://bugs.launchpad.net/bugs/118723
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@
I've just checked with the last development CD (Karmic): the behavior is
the same. One of the disk is correctly shut down, the other isn't and
warnings are logged.
--
hdparm -Y does not work (as it did in 8.10)
https://bugs.launchpad.net/bugs/374287
You received this bug notification because you
** Tags removed: needs-upstream-testing
--
USB UIRT: uirt2_raw: checksum error
https://bugs.launchpad.net/bugs/177166
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
I found it !
I did "hdparm -B 127 -S 1 /dev/sd?" and then "hdparm -B 127 -S 20 /dev/sd?",
and now the spindown via "hdparm -Y" is working !! I don't understand why, but
it solved my problem.
--
hdparm -Y does not work (as it did in 8.10)
https://bugs.launchpad.net/bugs/374287
You received this
Hi,
I tested with the last development ISO image of Ubuntu (using a Live
CD). I choose the "usb uirt" driver when asked. Then I did the
following:
sudo /etc/init.d/lirc stop # To stop LIRC daemon
sudo lircd -n # To work on foreground
and in another terminal, I wrote 'i
I use Jaunty, but I installed kernel and hdparm package from Karmic and I still
have the problem.
Actually, I have 2 disks (let's A, the system one, and B the unmounted one).
When I do "hdparm -Y" on A, A spins down (but power on just after since it's
the system disk): this behaviour is OK. But,
Public bug reported:
error while upgrading ubuntu 11.10
ProblemType: Package
DistroRelease: Ubuntu 11.10
Package: ttf-opensymbol 2:2.4.3+LibO3.3.4-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.38-11.50-generic 2.6.38.8
Uname: Linux 2.6.38-11-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 1.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/873729
Title:
package ttf-opensymbol 2:2.4.3 LibO3.3.4-0ubuntu1 failed to
install/upgrade: ErrorMessage: package ttf-opensymbol is already
installed
the reason why the portion of code in dispc.c
drivers/video/omap2/dss/dispc.c
if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
DSSERR("SYNC_LOST_DIGIT\n");
/*commenting below code as with 1080P Decode we see a sync lost digit for
first frame as it takes long time to decode but it la
Public bug reported:
Binary package hint: aptdaemon
I am trying to install Zumo Drive for LInux
The installation of a package which violates the quality standards isn't
allowed. This could cause serious problems on your computer. Please
contact the person or organisation who provided this packag
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/781568
Title:
I am trying to install Zumo Drive for LInux
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/lis
nd pasting information gets
lost.
The problem is best viewed in Calc: there you can see the selected cels
to copy. After a while the selection disapairs (no key or mouse button
pressed).
I looked at options in Klipper, but that did not help me.
I also searched in the help if there is some weird op
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/28408030/Dependencies.txt
--
copy and past does not work half the time
https://bugs.launchpad.net/bugs/392440
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
As on my machine this bug (see duplicate bug for my exact problem) is
very well reproducable may be I can help you Chris. Is there something
not to complicated I can do for you (I understand some of the inner of
Linux, can understand some coding but normaly gets completly lost in the
coding of othe
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/16671162/Dependencies.txt
** Attachment added: "ExtensionSummary.txt"
http://launchpadlibrarian.net/16671163/ExtensionSummary.txt
** Attachment added: "profiles.ini.txt"
http://launchpadlibrarian.net/16671164/profiles
Public bug reported:
Binary package hint: firefox-3.0
After installing Ubuntu 8.04 LTS (from disk) I lost the upper and lower
menu bars. Right click in upper and lower window space brings no
response other than the desktop "change desktop background" app. I have
to "crash" out to shut down.
Prob
Thanks for the correction phr0ze. I'm still learning Ubuntu but am
determined to stick with it.
--
desktop has lost the menu bar
https://bugs.launchpad.net/bugs/256297
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
Sebastien Bacher wrote:
> Thank you for taking the time to report this bug and helping to make Ubuntu
> better. Please answer these questions:
>
> * Is this reproducible?
> * If so, what specific steps should we take to recreate this bug?
>
> This will help us to find and resolve the pro
Same problem (keytouch not installed):
Most of the time my system hangs on logout.
With patience and lots of efforts I can most times switch to tty1 (certainly
not direct) and press Ctrl-alt-del to restart.
Alt-backspace does nothing.
My system:
Ubuntu 8.04
the nvidia driver on a geforce4 MX 440
** Summary changed:
- desktop has lost the menu bar
+ Re-installing Ubuntu solved the problem.
--
Re-installing Ubuntu solved the problem.
https://bugs.launchpad.net/bugs/256297
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
This solves also my problem under Ubuntu 8.04 (Long time suport)
version:
In 8.04 add under [X-:*-Core] in the file "/etc/kde3/kdm/kdmrc" the following
line:
TerminateServer=true
In KDE 3 there is no line to comment out, so you 've to add this line. I
see X and kdm restarting at logout.
--
[ha
I'm Sorry.
I'm trying to help you but the alpha 4 release states that it uses the
2.6.26 kernel so I can't test the 2.6.27 Kernel. Also nothing was
available as a package (I use the 8.04 stable release).
--
usbstick fails in Feisty(7.04)
https://bugs.launchpad.net/bugs/117138
You received this bu
I'm Sorry.
I'm trying to help you but the alpha 4 release states that it uses the
2.6.26 kernel so I can't test the 2.6.27 Kernel. Also nothing was
available as a package (I use the 8.04 stable release).
Op donderdag 28-08-2008 om 17:03 uur [tijdzone +], schreef Leann
Ogasawara:
> The Ubuntu
It seems that this bug is fixed in 8.10 Alpha 5 (2.6.27).
I tried coping three times with big files and it didn't fail (because of
the random character it is probably fixed, not sure)
I was not able to test with 2.6.26 because the Alpha 4 iso was removed
of the Ubuntu site.
--
usbstick fails in
I Could only test this with the bootable CD.
Twice of three times the laptop hang on shutdown, though I did not see
the strange (dangerous) very very bright screen.
The test is not perfect because the shutdown sequence isn't exactly the
same as on on installed version (which I can't test at this ti
In my case disabling Klipper in KDE4 solved my trouble.
See: Bug #311251 in kdebase-workspace (Ubuntu): “Copy & Paste work
intermittently with Klipper”
https://bugs.launchpad.net/ubuntu/+source/kdebase-workspace/+bug/311251
Note: OpenOffice was the only program I 've used wich caused trouble in
Public bug reported:
The usbstick mounts, but when reading data after a short time (5-20s)
the usbstick stops functioning (error pops up: can not read file or map,
the Konqueror screen gets of the stick gets empty, only about 5-20 MB
gets copied). This bug is specific for Feisty 7.04 (updated from
Public bug reported:
Binary package hint: linux-source-2.6.20
After downloading the latest Ubuntu upgrade (as of this date), I no
longer have use of lower case keys: A,Q or X. Tried 3 different
keyboards. I can only access these lower case letters by selecting "caps
lock" and holding down "shift"
I would just like to add that my friend and I are also experiencing this
problem. We are both running the latest Xubuntu. I experienced it
today so it is not fixed yet.
--
gutsy system freezes
https://bugs.launchpad.net/bugs/123463
You received this bug notification because you are a member of
I think this bug is fixed. I booted and did shut down ten times with the
splash screen and everything worked fine.
(problem is that the bug did not show up at every shutdown in my case)
Further: I have no clue if I am using this new PSB driver from Intel (I
assume Ubuntu 7.10 fixed this for me).
Op woensdag 21 november 2007, schreef Matt Zimmerman:
> At what point during shutdown does it hang? Is it when usplash_down
> runs, or sometime earlier or later?
The white screen shows up when changing the graphics/resolution when changing
from X tot usplash or from uspslash to text (so at diffe
> Can I put that on hold as an option for for a few days as I'm trying a
> simpler solution: removing usplash from /etc/init.d
For me the solution at the time was removing the splash screen at boot
and shutdown via /boot/grub/menu.lst
Just remove the splash option behind:
"# defoptions"
"kernel"
I could not reproduce this bug with the latest release (see my previous
report), however after testing it for you I again disabled the splash
screen (that's my favour). Sorry for the confusion I created.
In the past I had this bug. At that time I fixed it by removing the
splash screen. Today I poi
In reaction to Adair:
I'm confused by what you mean:
1. If the usplash screen is shut off in your case, and you still got a white
screen then this is apparently not a bug of usplash.
2. If the usplash screen does not disappear when shutting it off in menu.lst,
then I think you've got somehow a co
Additional info: It seems that this problem also occurs at the previous
Ubuntu version (6.10 CD) and latest Debian. Don't know why it didn't
bother me before...
Further I saw on the internet that Nvidia did have some problems (I've
an Epox 8RDA+ motherboard with Nvidia/nforce chipset) with usb. It
Public bug reported:
I've a Kubuntu Toshiba A110 with a 1280x800 display. I did like to set
poweroff time of my display at 5 minutes. After applying, it functioned
properly.
Two problems were caused by this bug:
1. Next morning the X system didn't start. /etc/X11/xorg.conf was changed in
such a
I can conform this bug on two equal Tosiba's (Satalite A110-225).
Work around work's also.
I had also this problem when loging in a second time as a different
user. I didn't check (yet) if this also solved that problem.
I suspect it has something to do with the graphical interface. Maybe
it's a
I am also experiencing this on my EeePC 1005HA running Ubuntu Netbook
Remix (UNR) 9.10.
I use XP more than Linux on this netbook primary because of this
maddening behavior. Also, why can't I make the screen dimmer? The lowest
brightness setting is still pretty bright, and I know the hardware can
g
I cannot find a way to change the screen brightness when running on
battery. There is a slider for brightness when on AC power, but it does
not affect anything when running on battery.
--
Backlight behaves erratically when changed from keyboard.
https://bugs.launchpad.net/bugs/498974
You received
measured speed about
15 Mb/s (when connection is 54 Mb/s) via WPA2 connection. My Internet
connection is practically about 28 Mb/s (using a PC with cabled
networkconnection). Speedtests all via my provider from internet.
3. in Linux the connection direct near the router is about 12 Mb/s (best
kubuntu upgrade 9.04 to 9.10 (AMD 64) xulrunner-1.9 pre-removal script
returns error 2
--
While trying to upgrade to 9.10 (Version released 10-29-09) from 9.04 got bug
about subprocess pre-installation script returned error exit status 2
https://bugs.launchpad.net/bugs/463998
You received this
Hey you guys,
I'm experiencing this problem on a Lenovo x61 tablet.
BUT, I've noticed that the lag depends on the pressure of the pen. If you pen
down on an icon on the desktop and drag it around, it goes really slow right?
But if you apply the minimum amount of pressure for the pen to be recogni
Problems stil remain (on vr 13th!) after an upgrade from KUbuntu 9.04 - 9,10
(Toshiba with 3945ABG-card).
I did not a fresh install but upgraded.
Does anyone know what drivers / modules are involved (to check version
and installation)?
Jørgen
--
[Jaunty] Intel wireless 3945ABG is unstable and
I’ve given up on qcow and on ubuntu for my hypervisor needs. See ya!
On Thu, Apr 26, 2018 at 3:00 PM falstaff wrote:
> Observed the same issue on Ubuntu 16.04.4 with a Dell R440 and a RAID 5
> consisting of 3 10k SAS disks. Using 16.04+UCA-Pike resolved the issue
> just fine.
>
> --
> You recei
I thank you for all your work.
I have since moved away from this block architecture and am no longer able
to verify with an existing configuration.
On Fri, Nov 22, 2019 at 6:36 AM Timo Aaltonen
wrote:
> Hello Patrick, or anyone else affected,
>
> Accepted libvirt into xenial-proposed. The pack
Not really a joke.
Its the more reasonable approach. As someone already stated its not just
configuration in the snap directory ... snap apps also seem (whether I
agree with whether the SHOULD) to store data in the snap directory. My
Videos are data. My Downloads are data. My Documents are data. W
I can confirm this bug.
Virtual box starts with kernel 4.4.0-142, but gives above errors with
kernel 4.4.0-143.
When trying to reinstall vbox (/sbin/vboxconfig as root) also the
version in kernel 4.4.142 breaks but can be easily repaired by
reinstalling vbox with kernel 4.4.0-142 active.
So I ne
Is this a kernel problem or an vbox issue? Move this to kernel bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1820712
Title:
package virtualbox 5.1.38-dfsg-0ubuntu1.16.04.3 failed to
install/u
A lot of discussion about moving the directory to .snap or .local. I
would be happy is for all that is sacred if they are not going to hide
it since data can be stored there PLEASE just capitalize it like every
other visible folder in my home folder:
\Desktop
\Documents
\Downloads
\Music
\Pictures
many thanks!
On Wed, Apr 12, 2017 at 2:38 PM, Joshua Powers
wrote:
> Hi and thanks for reporting this bug! I am going to see if someone else
> from the team can also take a look at this to see how big of a change
> this would require.
>
> Also, sorry for marking this as incomplete and then new
Well i'll be. It seems to work no problem upon subsequent tries.
Here's my methodology and run-through.
virsh # list
IdName State
17mail running
virsh #
virsh #
virsh #
vir
at this point, i'll consider it a one-time occurence, but i'm thinking
it may have happened other times, due to a jammed up backup script i see
once in a while. I don't wish to pursue it further until it's too
infuriating, then i'll just run a hostOS with a fresher version
available in a different
Happened again. Same VM, too. My backup script made it through 3 of
these, one hda, and one vda as well. Then this:
-BEGIN backup for VM called mail
Sat Apr 22 00:07:51 EDT 2017
current snapshots mail - should be empty
Name Creation Time State
-
what's the proper way to keep running the base LTS with a newer virt
stack? Do i need to point to a particular repo? Don't even know where
to start with this...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.n
Happy to share what i can.
I should have mentioned that the backup script goes through all my VM's, and my
ambiguous comment mentions that it went through 3 of the VM's before stalling
on this, the fourth. System is low utilisation for RAM CPU and disk. Proliant
G5 dual chip quad core (no HT)
Public bug reported:
After hibernating the system and than resuming it the system reboots
notifying that it is resuming and than stops/freezes. The system does
not respond to anything (no tty's other notifying textg are available).
After booting kernel 4.10-042 the hibernation and hibride hibern
kernel 4.4.0-109 (with kaiser patch against meltdown) does also function
all-right.
See attachment for system info.
** Attachment added: "system info of kernel with functioning hibernation"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1743094/+attachment/5036228/+files/version_and_lsp
apport information
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
** Tags added: apport-collected sylvia
** Description changed:
After hibernating the system and than resuming it the system reboots
notifying that it is resuming and than stops/freezes. The system does
apport information
** Attachment added: "IwConfig.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036232/+files/IwConfig.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
apport information
** Attachment added: "CRDA.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036230/+files/CRDA.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
hibern
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036235/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
hibe
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036234/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
hibe
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036240/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036238/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036243/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
hi
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036239/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/174
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036231/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036236/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
apport information
** Attachment added: "RfKill.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036242/+files/RfKill.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
hi
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036237/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
apport information
** Attachment added: "JournalErrors.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036233/+files/JournalErrors.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/17430
apport information
** Attachment added: "PulseList.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036241/+files/PulseList.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Titl
apport information
** Attachment added: "WifiSyslog.txt"
https://bugs.launchpad.net/bugs/1743094/+attachment/5036244/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Ti
If I knew how I might be able to bisect. I found some info on the issue
(see links), I think I can compile a kernel if I knew the options that
the kernel I used was compiled with. I'm not really a programmer so if I
have to read through (too much) code I will fail. Is there a link for
Ubuntu standa
bugfix mentioned : https://bugzilla.redhat.com/show_bug.cgi?id=1197592
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1681839
Title:
libvirt - disk not ready for pivot yet
To manage notifications ab
Public bug reported:
root@thewind:/home/bestpa/scripts# virsh blockcommit mail vda --active
--verbose --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: block copy still active: disk 'vda' not ready for pivot yet
found related bugfix at redhat... can i get 1.3.2 pushed i
Public bug reported:
After installing the proprietary Nvidia drivers and then using the
included Nvidia X Server Settings utility to manually set the resolution
to 1920x1080 and the refresh rate to 144Hz (I have a 144Hz monitor),
Unity still seems to move at the default f/s cap, which also limits
Public bug reported:
Last evening I lost my launchpad with the menu after a reboot. After about 3
hours of trying to resolve the problem I decided to just reinstall Ubuntu.
During install I chose the upgrade to 15.10. ?the install reported that it had
problems with some packages and I would
I can send SIGINT to xfwm4 and problem no long exists for that session.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/855900
Title:
xfwm4 100% cpu usage on one core (AMD E350)
To manage notificatio
This bug affects me on an Intel (single core) system. Confirmed on
Ubuntu and ArchLinux.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/855900
Title:
xfwm4 100% cpu usage on one core (AMD E350)
To m
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919860
Title:
Rhythmbox freezes sporadically when new song starts
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+sourc
Public bug reported:
Ubuntu 11.10
Rhythmbox 2.90.1
There is no clear pattern or cause to the problem but when a new song
starts, for example when you click next song, Rhythmbox sometimes
freezes and I have to Alt+F4 before a popup tells me it is not
responding and I must 'force quit' the program.
Public bug reported:
Hi.
I'm sorry if this goes to the wrong people, but npm told me to submit
this bug with reportbug. reportbug told me to use ubuntu-bug and now
here I am.
The error line was:
npm ERR! error installing uglify-js@2.2.5
npm ERR! Error: No compatible version found: source-map@'>
Just a heads up to add to this. This has been an issue in e17
Enlightenment Desktop for a while. I suspect that the compositor
settings are to blame here. Wasn't there a way to force certain apps to
be punched out of the compiz settingscompositor settings?? Going to
the extreme, is there a way
Public bug reported:
Can't update system at all. Even when running "apt-get -f upgrade" I get
this error:
Errors were encountered while processing:
/var/cache/apt/archives/libgtk-3-0_3.6.0-0ubuntu3.2_amd64.deb
/var/cache/apt/archives/overlay-scrollbar-gtk3_0.2.16+r357-0ubuntu1.1_amd64.deb
E: Su
Disabling tcp window scaling seems to solve my problems also (tested
with copiing iso-files).
as instructed, add: net.ipv4.tcp_window_scaling=0 to /etc/sysctl.conf.
If problems return I'll report here that it's not a complete solution.
--
[Jaunty] Intel wireless 3945ABG is unstable and disconne
Public bug reported:
trying to reinstall my Ubuntu 18.04 on my Toshiba Satelite 64 bus
laptop. I have a loaded flash drive but I keep getting an error message
as follows, (Error ID: OOPS-f9a25a1047f367bba335ebdf6c9c0a24)
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: xorg 1:7.7+19ubuntu7.1
*** This bug is a duplicate of bug 2075580 ***
https://bugs.launchpad.net/bugs/2075580
Public bug reported:
Aug 04 22:48:01 redacted systemd[1]: Starting Load AppArmor profiles managed
internally by snapd...
Aug 04 22:48:01 redacted snapd-apparmor[490231]: main.go:124: Loading profiles
[/va
*** This bug is a duplicate of bug 2075580 ***
https://bugs.launchpad.net/bugs/2075580
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/2076575/+attachment/5805089/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Bug
*** This bug is a duplicate of bug 2075580 ***
https://bugs.launchpad.net/bugs/2075580
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/2076575/+attachment/5805090/+files/ProcCpuinfoMinimal.txt
** This bug has been marked a duplicate of bug 2075580
AppArmo
Hi Alex, I've opened 2076575 and ran `apport-collect` on a machine that
is having the same issues as the original reporter - I've marked my bug
as a duplicate of this one.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.la
1 - 100 of 1694 matches
Mail list logo
