Thanks Oliver,
the your first advice worked fine for me. Now I have a test.kml file.
I did the other two commands (I do not have a gps connected, I just have
the .gdb file):
gustavo$ sudo modprobe garmin_gps
gustavo$ gpsbabel -i gdb -f la_ponderosa_way_points.gdb -o garmin -F
/dev/ttyUSB0[ERROR]
*** This bug is a duplicate of bug 114565 ***
https://bugs.launchpad.net/bugs/114565
This seems to work:
$ gpsbabel -i gdb -f your_file.gdb -o kml -F test.kml
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
*** This bug is a duplicate of bug 114565 ***
https://bugs.launchpad.net/bugs/114565
Thanks Guillermo.
The user (myself) are already added to the dialout group. So, please, do you
have any other advice?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have similar problem:
What I need is to read a .gdb file from the hard disk. The same error appear.
How can I read the file? gpsbabel always attempts to read directly for the
garmin device.
Thanks
Gustavo
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
*** This bug is a duplicate of bug 114565 ***
https://bugs.launchpad.net/bugs/114565
I have similar problem:
What I need is to read a .gdb file from the hard disk. The same error appear.
How can I read the file? gpsbabel always attempts to read directly for the
garmin device.
Thanks
Gustavo
apport information
** Attachment added: "UdevLog.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418676/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
Title
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418672/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/61505
apport information
** Attachment added: "AplayDevices.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418661/+files/AplayDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615
apport information
** Attachment added: "WifiSyslog.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418685/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
apport information
** Attachment added: "UdevDb.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418675/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
Title:
apport information
** Attachment added: "ProcModules.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418674/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/61505
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418673/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
apport information
** Attachment added: "PciMultimedia.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418671/+files/PciMultimedia.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/6
apport information
** Attachment added: "Lsusb.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418670/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
Title:
apport information
** Attachment added: "Lspci.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418669/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
Title:
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418668/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615
apport information
** Attachment added: "Card1.Codecs.codec.0.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418667/+files/Card1.Codecs.codec.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launch
apport information
** Attachment added: "Card0.Codecs.codec97.0.ac97.0.0.regs.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418666/+files/Card0.Codecs.codec97.0.ac97.0.0.regs.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
apport information
** Attachment added: "Card0.Codecs.codec97.0.ac97.0.0.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418665/+files/Card0.Codecs.codec97.0.ac97.0.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
apport information
** Attachment added: "Card0.Amixer.values.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418664/+files/Card0.Amixer.values.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpa
apport information
** Attachment added: "BootDmesg.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418663/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/615058
T
apport information
** Attachment added: "ArecordDevices.txt"
https://bugs.edge.launchpad.net/bugs/615058/+attachment/2418662/+files/ArecordDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
by changing the memory/cpu voltage! Is that actually
necessary? Very risky solution!
Now I am afraid of turning off the computer.
Btw:
gcordoba@udenarUrcunina:~$ uname -a
Linux udenarUrcunina 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC
2010 i686 GNU/Linux
Ubuntu 2.6.3
Do you need some .log or more info? Which kind of info?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/484955
Title:
Cannot save animation in paraview
To manage notifications about this bug go to:
h
Yes. Even more, the fact that the last frame is shown as white page is annoying.
I tried by deleting the last frame from the source (the last xdmf000x), and of
course and reading error occurs.
There are more small annoying issues that I forget right now.
--
You received this bug notification be
Hi,
I am attaching the backtrace. Hope it is useful.
** Attachment added: "gdb-firefox.txt"
https://bugs.launchpad.net/ubuntu/+source/nspluginwrapper/+bug/714078/+attachment/1927167/+files/gdb-firefox.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Btw, It seems for me that this bug began to appear after an upgrade of firefox.
Do any one fixed another bug on a previous version of firefox? Or, on a
previous version of npviewer or nsplugin? My question is because this is
happening in Chromium too.
--
You received this bug notification becau
Trying to watch euronews and/or bbc (www.livestation.com) I got on my 64b pc:
-
*** NSPlugin Viewer *** WARNING: unhandled variable 18 () in
NPN_GetValue()
(npviewer.bin:1692): Gdk-CRITICA
I just uninstalled Paraview with synaptic, then I downloaded the general
version for Linux of Paraview 3.8 directly from their site. Now it works almost
fine (the last frame of the animation and the saved .avi animation became
lost). But at least an animation is saved!
Thus, this bug 484955 in
Same problem here. Ubuntu 10.04
--
Cannot save animation in paraview
https://bugs.launchpad.net/bugs/484955
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.co
** Attachment added: "the adviced .logs"
http://launchpadlibrarian.net/53283507/logs.tar
--
BUG: Bad page state in process init pfn: 17ee2
https://bugs.launchpad.net/bugs/615058
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubu
Public bug reported:
Ubuntu version: 10.04
After several reports of "kernel panic" at booting time, now this is appearing:
BUG: Bad page state in process init pfn: 17ee2
...
no init found. Try passing init=booting
...
switch
Same problem here.
After several reports of "kernel panic" at booting time, now this is appearing:
BUG: Bad page state in process init pfn: 17ee2
...
no init found. Try passing init=booting
...
switching to software fbcon
...
Hi,
I found a partial solution. The problem is on the mpich installation. It
installed mpi.h on several places and when mpi is called any program that use
it becomes confused.
I discover this during an installation checking by looking the .configure.log.
It showed me that the library -lmpich was
/ld-2.9.so (0x400)
--9198-- Reading debug info from /lib/ld-2.9.so ..
--9198-- .. CRC mismatch (computed 049232cc wanted 022486d8)
--9198--object doesn't have a symbol table
--9198-- Reading syms from /home/gcordoba/tmp/a.out (0x8048000)
--9198-- Reading syms from /usr/lib/valgrind/x86-
*** This bug is a duplicate of bug 319880 ***
https://bugs.launchpad.net/bugs/319880
Hi, I do not think it is a duplicate. I reported a bug few days ago(
#419467) that shows a similar problem that appears using mpich (debuging
with valgrind):
--7501-- Reading debug info from /lib/tls/i686/cmo
Hi again,
this is to report that the same problem occurs with a simple program that uses
mpi (see the attached file).
** Attachment added: "This attachment contains an small mpi example program."
http://launchpadlibrarian.net/31059995/mpi.ex1.c
--
valgrind reports a problem with mpich and l
** Attachment added: "mpi.ex1.c"
http://launchpadlibrarian.net/31060011/mpi.ex1.c
--
valgrind reports a problem with mpich and ld-2.9.so library
https://bugs.launchpad.net/bugs/419467
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
** Attachment added: "valgring-report.log.tar"
http://launchpadlibrarian.net/30870958/valgring-report.log.tar
--
valgrind reports a problem with mpich and ld-2.9.so library
https://bugs.launchpad.net/bugs/419467
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: mpich-bin
I was trying to run a new program developed by SUNY at Buffalo and the
program seems to go into an infinite loop. The same happen with a former
version which also uses mpi. They do callings to mpich. Thus, I run
the program using valgrind:
Th
I think is not a problem in Ktorrent. It happen also with other programs. I
have same problem with xmgrace in a eeePC. I though it was a problem o the
small screen in the Asus eeePC 4G. However now a remember the same problem with
other rograms even using Ubuntu (Edgy? Dapper? -dont remember).
This is mad. It seems that newer versions of ubuntu are based on previous
released versions plenty of bugs. In this way we never will obtain a stable
version that make us proud of Linux.
However, and despite of that, I always prefer Linux! I never loss my hopes.
Gustavo
PS.: the package mpich h
Hi, I have installed the official flashpayer. However firefox crashes almost
randomly.
I am attaching the report file.
Hope this is useful.
Gustavo
** Attachment added: "report of a crash in firefox"
http://launchpadlibrarian.net/12861477/_usr_lib_firefox_firefox-bin.1000.crash
--
MASTER fi
*** This bug is a duplicate of bug 53387 ***
https://bugs.launchpad.net/bugs/53387
I disagree with Saivann. It could be the same bug which is producing problems
in both wireless and wired networks. I am sure that just one fix is needed for
both.
By the way, the Tom M's tip worked for me. Ev
hi,
I join the group having problems with dhcp. I moved from Debian (sarge?) to
Ubuntu Gutsy at my University. After few connection problems I fixed by
choosing a fix IP. However, I move the computer to a place in which a fix IP is
not possible. I modified the network setting and all seems to wo
Hi,
yes it works fine.
However, I am trying to install a software for modeling that needs both mpi and
hdf5. The last reported lines in the configure file were:
checking for pthread_create in -lpthread... yes
checking for MPI_Init in -lmpich... no
checking for MPI_Init in -lmpi... yes
checking for
Hi,
what about doing fsck umounting the HD? I found that lot of people advice that
in other forums.
Additionaly, in
Ubuntu Forums > The Ubuntu Forum Community > Main Support Categories
> General Help
Manual Fsck
a more "safe" procedure is adviced:
sudo touch /forcefsck && sudo reboot
It seems that it is a problem:
0) It is only possible to run the program from a terminal
1)The program only starts in that way if the internet connection is working
(???)
2) If I try to exit, the program crashes and crt-c need to be done to let it
to stop
However the most important is:
3) wit
I updated to Eddgy and the problem is the same.
Cheers,
Gustavo
--
koctave does not starts
https://bugs.launchpad.net/bugs/76496
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Just today I tried to install the packages. However, I couldnt install them:
They report:
1) Dependency is not satisfiable: libc6
2) Conflicts with installed libcupssys2-dev
Any advice?
Thanks,
Gustavo
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
Public bug reported:
Binary package hint: koctave
I have the Dapper version of Ubuntu.
I installed koctave (including octave), however, it seems that it coudn't find
the path as it initially report that it is assuming /usr/bin/octave as a path.
After that, a crash report appear, which I am att
Sorry, I forgot the attach...
** Attachment added: "koctave bug report"
http://librarian.launchpad.net/5476557/koctave-bug.txt
** Description changed:
Binary package hint: koctave
I have the Dapper version of Ubuntu.
- I installed koctave (including octave), however, it seems that it
I am attaching the the printingbuginfo output.
Just in case.
Gustavo
** Attachment added: "printingbuginfo result"
http://librarian.launchpad.net/5310255/printingbuginfo.txt
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
ubuntu-bugs mailing list
Public bug reported:
We installed Ubuntu 6.06 Dapper on a Dual Processor Xeon at 64b machine. We
discover that it seems that the proper kernel image
(kernel-image-2.6.11-9-em64t-p4-smp) for that architecture is not longer
available in the Dapper distribution.
We need use all the capabilities o
In my case 'gksu-cups-add' detected two ppds for ach driver tested
(the gzipped and the gunzipped). e.g.:
** (gnome-cups-add:6359): WARNING **: Two ppds have driver == 'Standard'
->linuxprinting.org-postscript/Savin/Savin-SLP26n_PS.ppd.gz (Savin
SLP26n PS[0]) and
->linuxprinting
Hi, thanks for your advice.
The dmesg is very long, then I am attaching it as a file (dm.txt)
Here some of the output:
[17211146.124000] Inbound IN=eth0 OUT=
MAC=00:00:39:ea:32:f4:00:0d:66:24:60:55:08:00 SRC=172.202.234.230
DST=82.40.163.178 LEN=63 TOS=0x00 PREC=0x00 TTL=114 ID=37674 PROTO=UDP
[EMAIL PROTECTED]:~$ sudo pico /boot/grub/menu.lst
Password:
[EMAIL PROTECTED]:~$ sudo update-initramfs
You must specify at least one of -c, -u, or -d.
Usage: /usr/sbin/update-initramfs [OPTION]...
Options:
-k [version] Specify kernel version or ALL
-c Create a new initramfs
-u
Today, I tried the same without success:
[EMAIL PROTECTED]:~$ sudo dmesg | grep lp0
[EMAIL PROTECTED]:~$ dmesg | grep lp0
[EMAIL PROTECTED]:~$ dmesg | grep lp
[17179569.184000] On node 0 totalpages: 65344
[17179571.836000] Calibrating delay using timer specific routine.. 3991.79
BogoMIPS (lpj=798
Please, any idea?...
Gustavo
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[EMAIL PROTECTED]:~$ echo hello | sudo tee /dev/lp0
Password:
hello
[EMAIL PROTECTED]:~$
As you can see, that line produced only the echo.
Gustavo
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
[EMAIL PROTECTED]:~$ sudo cat ~/.bashrc > /dev/lp0
bash: /dev/lp0: Permission denied
It souds just as a permissions problem...
Gustavo
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lis
Yes, it is Standart Bi-directional.
No other physical devices attached to the port
I do not know about any Canon or Epson entries
It do not print manually.
Best regards,
Gustavo
--
cupsys does not automatically detect parallel printer
https://launchpad.net/bugs/29050
--
ubuntu-bugs mailing
Hi,
I am trying to fix the non-detection problem for a HP LaserJet 5L (parallel
port). I am using Ubuntu6.06. I just tried with most of the tips without
success. However, it seems to me that the problem is that the parallel port are
used by someone/something.
I am attaching al the trials done.
63 matches
Mail list logo
