led but CONFIG_ADC is not.
Fix this by making CONFIG_ADC_IMX93 depend on CONFIG_ADC.
Signed-off-by: Sébastien Szymanski
---
drivers/adc/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig
index 4336732dee56..a01d73846b74 100644
--- a/drivers/adc/Kconfig
+++ b
Add clocks nodes in u-boot.dtsi file.
Remove init_uart_clk() call.
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 23 +++
board/freescale/imx93_evk/imx93_evk.c| 2 --
configs/imx93_11x11_evk_defconfig| 2 ++
3 files changed
LPUART1
Sébastien Szymanski (2):
clk: imx: add i.MX93 CCF driver
imx93_evk: defconfig: enable clock driver
Ye Li (1):
serial: lpuart: Enable IPG clock
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 23 ++
arch/arm/dts/imx93.dtsi | 4 +-
board/freescale/imx93_evk/imx93_evk.c
From: Alice Guo
When CLK is enabled, get_lpuart_clk_rate() needs to get a per clock of
lpuart, so that add a per clock for lpuart1.
Signed-off-by: Alice Guo
Reviewed-by: Ye Li
Signed-off-by: Sébastien Szymanski
---
This commit comes from downstream U-Boot:
https://github.com/nxp-imx/uboot
Add i.MX93 CCF driver support.
Modifed from Linux Kernel v6.5-rc2 and adapted for U-Boot.
Signed-off-by: Sébastien Szymanski
---
drivers/clk/imx/Kconfig | 18 ++
drivers/clk/imx/Makefile| 2 +
drivers/clk/imx/clk-composite-93.c | 142 +
drivers
From: Ye Li
Current codes only ennable the PER clock. However on iMX8 the LPUART
also needs IPG clock which is an LPCG. Should not depend on the default
LPCG setting.
Signed-off-by: Ye Li
Reviewed-by: Peng Fan
Signed-off-by: Sébastien Szymanski
---
This commit comes from downstream U-Boot
Hello,
On 7/25/23 10:08, Sébastien Szymanski wrote:
This series adds i.MX93 CCF driver, modifed from Linux kernel 6.5-rc2
and adapted for U-Boot.
Patches 2 and 3 come from NXP U-Boot.
A boot log and a dump of the clock tree are available at the following
URL:
https://pastebin.com/7WbubSXK
Hi Stefano,
On 10/16/23 16:22, Stefano Babic wrote:
Hi Sebastian,
On 27.07.23 10:33, Sébastien Szymanski wrote:
Add support for DWC EQoS MAC on i.MX93.
Signed-off-by: Sébastien Szymanski
---
drivers/net/dwc_eth_qos.c | 4
drivers/net/dwc_eth_qos_imx.c | 3 +++
2 files changed
Add support for DWC EQoS MAC on i.MX93.
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- rebase to not break Rockchip's boards
drivers/net/dwc_eth_qos.c | 4
drivers/net/dwc_eth_qos_imx.c | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/net/dwc_eth_qo
The correct compatible string for i.MX93 variant of DWC EQoS MAC is now
"nxp,imx93-dwmac-eqos".
Signed-off-by: Sébastien Szymanski
---
Changes for v4:
- none
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 4
1 file changed, 4 deletions(-)
diff --git a/arch/arm/dts/imx93-1
Add a common board_interface_eth_init() called by the DWC MAC driver to
setup the MAC <-> PHY interface according to the PHY mode obtained from
DT.
Remove the board-side configuration in the i.MX93 EVK files.
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- none
arch/arm/ma
Add support for the RTL8211F(D)(I)-VD-CG PHY present on the i.MX93 EVK
board.
Signed-off-by: Sébastien Szymanski
---
Changes for v3:
- none
drivers/net/phy/realtek.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
This series fixes i.MX93 11x11 EVK boot failures.
Sébastien Szymanski (2):
arm: dts: imx93-11x11-evk: add bootph-some-ram property
dm: adc: imx93-adc depends on ADC (fix boot)
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 20
configs/imx93_11x11_evk_defconfig| 1
as pre-reloc
after relocation")
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
index 5b465e2dbd9d..2d9
d but CONFIG_ADC is not.
Fix this by enabling CONFIG_ADC in imx93_11x11_evk_defconfig.
Make sure this situation won't happen again in future i.MX93 defconfig by
making CONFIG_ADC_IMX93 depend on CONFIG_ADC.
Signed-off-by: Sébastien Szymanski
---
configs/imx93_11x11_evk_defconfig | 1 +
drivers/a
one
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 125
*** Unhandled DHCP Option in OFFER/ACK: 125
DHCP client bound to address 192.168.1.50 (35 ms)
u-boot=> ping 192.168.1.51
Using ethernet@428a device
host 192.168.1.51 is alive
u-boot=>
Sébastien Szymanski (4):
net: dwc_eth
Add support for DWC EQoS MAC on i.MX93.
Signed-off-by: Sébastien Szymanski
---
drivers/net/dwc_eth_qos.c | 4
drivers/net/dwc_eth_qos_imx.c | 3 +++
2 files changed, 7 insertions(+)
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 1e92bd9ca9c0..f70f8afe5831
Add a common board_interface_eth_init() called by the DWC MAC driver to
setup the MAC <-> PHY interface according to the PHY mode obtained from
DT.
Remove the board-side configuration in the i.MX93 EVK files.
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/imx9/clock.c
Add support for the RTL8211F(D)(I)-VD-CG PHY present on the i.MX93 EVK
board.
Signed-off-by: Sébastien Szymanski
---
drivers/net/phy/realtek.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 396cac76d632
The correct compatible string for i.MX93 variant of DWC EQoS MAC is now
"nxp,imx93-dwmac-eqos".
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 4
1 file changed, 4 deletions(-)
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
b/arch/arm
's because 'linux' is a System-specific Predefined Macros. [1]
Pass the '-ansi' option as suggested by the GCC documentation. [1]
Fix the two .env files using C++ comment style for their SPDX licence.
[1]
https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Pre
Hi Fabio,
On 12/15/23 13:03, Fabio Estevam wrote:
Hi Sébastien,
On Fri, Dec 15, 2023 at 8:14 AM Sébastien Szymanski
wrote:
--- a/board/siemens/iot2050/iot2050.env
+++ b/board/siemens/iot2050/iot2050.env
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+
+/* SPDX-License-Identifier: GPL
's because 'linux' is a System-specific Predefined Macros. [1]
Pass the '-ansi' option as suggested by the GCC documentation. [1]
Fix the two .env files using C++ comment style for their SPDX licence.
[1]
https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Pre
cence.
[1]
https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Predefined-Macros.html
[2] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html#index-ANSI-support
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- explain the change of iot2050.env and smegw01.env in th
ddr {
align = <4>;
--
Sébastien Szymanski, Armadeus Systems
Software engineer
On 7/19/24 16:13, Fabio Estevam wrote:
Hi Sébastien,
On Fri, Jul 19, 2024 at 11:00 AM Sébastien Szymanski
wrote:
+&A55_0 {
+ clocks = <&clk IMX93_CLK_ARM_PLL>;
Why IMX93_CLK_ARM_PLL and not IMX93_CLK_A55_SEL ?
IMX93_CLK_A55_SEL is a mux that can select between a55_alt
am not sure if this is the
root problem here.
Best regards Johannes
--
Sébastien Szymanski, Armadeus Systems
Software engineer
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by:
.
That's because 'linux' is a System-specific Predefined Macros. [1]
Pass the '-undef' option to fix this issue.
[1]
https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Predefined-Macros.html
Signed-off-by: Sébastien Szymanski
---
Changes for v3:
- use -undef i
m from the
opos6uldev.env file.
Update the opos6uldev_defconfig file so that the LCD turns on at boot.
Fixes: 5d7a95f4 ("imx6ul/imx6ull: synchronise device trees with linux")
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 28 +-
board
;
without updating the mxsfb driver to match that change.
Add "fsl,imx6sx-lcdif" as a compatible id to fix that.
Fixes: bf947d2a4b15 ("imx6ul: synchronise device tree with linux")
Signed-off-by: Sébastien Szymanski
---
drivers/video/mxsfb.c | 1 +
1 file changed, 1 insertio
, Sumit Garg wrote:
+ Shawn, Krzysztof, Conor
Hi Tom,
On Wed, 28 Feb 2024 at 18:40, Tom Rini wrote:
On Wed, Feb 28, 2024 at 10:09:13AM +0300, Dan Carpenter wrote:
On Tue, Feb 27, 2024 at 04:40:01PM +0100, Sébastien Szymanski wrote:
Commit 5d7a95f4 ("imx6ul/imx6ull: synchronise device
is on the boot partion, so rework
the offset computation by handling the two specific cases (SD and
FlexSPI).
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/spl_imx_romapi.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/spl_imx_romapi.c
b/arc
is 0 so this computation is wrong.
Simplfy this computation to work on all booting devices.
Signed-off-by: Sébastien Szymanski
---
Changes from v2:
* Previous version was wrong.
arch/arm/mach-imx/spl_imx_romapi.c | 7 +--
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch
Quoting Ye Li from NXP:
"We have confirmed with PMIC team, 0x35 is used only on early chips
and not used any more. 0x25 is the final address."
Fix it by merging power_pca9450a_init and power_pca9450b_init into one
function power_pca9450_init.
Signed-off-by: Sébastien
gt; p->hw.i2c.tx_num = 1;
>> p->bus = bus;
>
> There was a thread to address this, but not take udevice_id into
> consideration.
> Your version looks better.
In that thread [1], it was suggested to merge both function
power_pca9450{a,b}_init into one function power_pca9450_init.
[1] https://lists.denx.de/pipermail/u-boot/2020-June/418123.html
Regards,
>
> Reviewed-by: Peng Fan
>
>>
>> --
>> 2.17.1
>
--
Sébastien Szymanski, Armadeus Systems
Software engineer
clk enet_axi
clk_get_parent_rate 489: clk enet_axi parent clock-osc-24m
clk_get_parent_rate 489: clk enet1_root_clk parent enet_axi
fecmxc_probe 1390
Is this a known issue ?
Regards,
--
Sébastien Szymanski, Armadeus Systems
Software engineer
;
^~
include/dm/pinctrl.h:319:10: note: each undeclared identifier is reported only
once for each function it appears in
Signed-off-by: Sébastien Szymanski
---
include/dm/pinctrl.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h
index
Set gd->fb_base so it can be shown with bdinfo command.
Signed-off-by: Sébastien Szymanski
---
Changes for v3:
- use plat->base instead of fb_start
drivers/video/mxsfb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 6922
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.
Reviewed-by: Peng Fan
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- added Reviewed-by tag
arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 10 ++
arch/arm/dts/imx6ul-opos6uldev.dts
Migrate to DM_ETH and remove code that is no longer necessary.
Reviewed-by: Peng Fan
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- added Reviewed-by tag
arch/arm/mach-imx/mx6/opos6ul.c | 76 +++--
configs/opos6uldev_defconfig| 2 +
include/configs
Hi,
On 6/9/20 6:03 AM, Ye Li wrote:
> Hi Sébastien,
>
>> -Original Message-
>> From: U-Boot On Behalf Of
>> sba...@denx.de
>> Sent: 2020年6月9日 1:22
>> To: Sébastien Szymanski ; u-
>> b...@lists.denx.de
>> Subject: [EXT] [PATCH v2
PCA9450A I2C address is 0x25. Fix it.
Signed-off-by: Sébastien Szymanski
---
drivers/power/pmic/pmic_pca9450.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/pmic/pmic_pca9450.c
b/drivers/power/pmic/pmic_pca9450.c
index 67a9090200..c0fb78c4cd 100644
--- a
On 6/29/20 11:51 AM, Ye Li wrote:
> On Mon, 2020-06-29 at 10:42 +0200, Sébastien Szymanski wrote:
>> Caution: EXT Email
>>
>> PCA9450A I2C address is 0x25. Fix it.
>>
>> Signed-off-by: Sébastien Szymanski
>> ---
>> drivers/power/pmic/pmic_pca9450.c
When a firmware file is missing the warning message doesn't indicate the
firmware file name because '$tmp' var doesn't exist.
Fix the warning message and while at it reduce the if/else statement.
Signed-off-by: Sébastien Szymanski
---
tools/imx8m_image.sh | 6 ++---
Hi Tom,
> On 1 Sep 2018, at 13:37, Tom Rini wrote:
>
> - So I start reading the whole diff and I see:
> commit 8e00d802e402d2a6734a88ebeb77a70efcfc354c
> Author: Sébastien Szymanski
> Date: Wed Jul 25 14:47:53 2018 +0200
>
>ARM: opos6ul: make the board boot a
b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,
dm-spl")
Signed-off-by: Sébastien Szymanski
---
Changes for v3:
- use the automatic inclusion of -u-boot.dtsi mechanism of U-Boot.
Changes for v2:
- put u-boot,dm-spl properties into -u-boot.dts files
arch/arm/dts/imx6ul
e, look like DEBUG Uart doesn't support low
> level init. Peng or someone can explain more.
When converting the OPOS6UL to DM, I had to move the
preloader_console_init call into the spl_board_init function.
Regards,
>
> Jagan.
>
--
Sébastien Szymanski
Software engineer, Armade
On 06/07/2018 10:35 AM, Hannes Schmelzer wrote:
> On 06/07/2018 09:50 AM, Sébastien Szymanski wrote:
>> Hi,
> Hi Sébastien,
>>
>> On 06/07/2018 09:14 AM, Jagan Teki wrote:
>>> + Add few imx maintainers
>>>
>>> On Thu, Jun 7, 2018 at 12:25 PM,
h-spl.imx for MMC/SD
boot device.
The default offset for the U-Boot image on MMC/SD boot device is 69KB
(see SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) so I think CONFIG_SPL_PAD_TO
should always be 0x11000 (== 68KB).
Regards,
>
> /* MMC support */
> #if defined(CONFIG_SPL_MMC_SUPPORT)
>
--
i.MX6UL: U-Boot specific dts for u-boot,
dm-spl")
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx6ul-opos6ul.dtsi | 33 +++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/imx6ul-opos6ul.dtsi b/arch/arm/dts/imx6ul-opos6ul.d
b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,
dm-spl")
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- put u-boot,dm-spl properties into -u-boot.dts files
arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28
arch/arm/dts/imx6ul-opos6u
Otherwise BMP RLE8 images are not properly displayed.
Signed-off-by: Sébastien Szymanski
---
drivers/video/cfb_console.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 40110668a6..636c3e8c18 100644
--- a/drivers/video
Hello,
On 09/06/2018 03:57 PM, Stefano Babic wrote:
> On 06/09/2018 09:51, Sébastien Szymanski wrote:
>> Commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,
>> dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file
>> and break
Signed-off-by: Sébastien Szymanski
---
drivers/serial/serial_mxc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 1cfcbf2..64126e2 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -365,6 +365,7
]
Hit any key to stop autoboot: 0
Signed-off-by: Sébastien Szymanski
---
arch/arm/cpu/armv7/mx6/Kconfig | 15 ++
arch/arm/cpu/armv7/mx6/Makefile | 1 +
arch/arm/cpu/armv7/mx6/opos6ul.c| 302 +++
arch/arm/dts/Makefile | 3 +-
arch
gned-off-by: Sébastien Szymanski
---
arch/arm/dts/imx6ul.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index c5c05fd..def5f8c 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -43,6 +43,8 @@
spi
hat's because there is '/dts-v1/;' in the imx6ul-isiot.dtsi
file and in imx6ul-isiot-*.dts files.
With this change:
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 346079a..9a3c35c 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-i
On 02/27/2017 03:38 PM, Jagan Teki wrote:
> On Monday 27 February 2017 07:58 PM, Sébastien Szymanski wrote:
>> Hello,
>>
>> On 02/26/2017 12:54 PM, Stefano Babic wrote:
>>> On 24/02/2017 11:15, Jagan Teki wrote:
>>>> From: Jagan Teki
>>>>
&
cpus {
The imx6ul.dtsi file already has usbotg{0,1} aliases.
http://git.denx.de/?p=u-boot.git;a=commit;h=b3cab814232d3b5e165c09ffad4af5b71bde15f3
Regards,
--
Sébastien Szymanski
Software Engineer, Armadeus Systems
sebastien.szyman...@armadeus.com
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9
istent node or label "usbotg1"" when DTS is compiled:
>
> opos6uldev
> mx6sllevk_plugin
> mx6slevk_spinor
> imx6qdl_icore_rqs_mmc
> ...
>
It looks like my comment has been missed.
The imx6ul.dtsi file already has usbotg{0,1} aliases.
Regards,
>
> Can you check th
ze the filesystem under Linux, I don't get the crash but the
following error:
ext4fs_devread read outside partition 4294967294
error in File System init
** Error ext4fs_write() **
** Unable to write file /boot/opos6ul-linux.bin **
Any idea ?
Regards,
--
Sébastien Szymanski
Software Engineer, Ar
ilesize}
>
> What are you trying to achieve here? What is the value of $filesize?
I try to update the kernel image which is /boot/opos6ul-linux.bin. I
download it from a tftp server so $filesize is the size of the kernel image
BIOS> printenv filesize
filesize=518f68
>
> Btw, which u-b
On 11/29/2016 03:38 PM, Brüns, Stefan wrote:
> On Dienstag, 29. November 2016 14:10:54 CET Sébastien Szymanski wrote:
>>
>>> Btw, which u-boot version are you using?
>>
>> I first noticed the issue on U-Boot 2016.05 so I rebase on master from
>> http://
)
CPU: Freescale i.MX6ULL rev1.0 69 MHz (running at 396 MHz)
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/mx6/soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index af31673..7607456 100644
--- a/arch
Hi,
On 08/02/2017 12:11 PM, Stefano Babic wrote:
> On 02/08/2017 12:15, Sébastien Szymanski wrote:
>> Return the correct value when the speed grade is 696MHz.
>> This makes U-Boot to print the correct value at boot:
>>
>> U-Boot 2017.09-rc1-dirty (Aug 02 2017
Return the correct value when the speed grade is 696MHz.
Signed-off-by: Sébastien Szymanski
---
Changes v1 -> v2:
- Only true on i.MX6UL so adapt the subject and commit log accordingly.
---
arch/arm/mach-imx/mx6/soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/
i.MX6ULL has different speed grades than i.MX6UL.
Signed-off-by: Sébastien Szymanski
---
Notice that the i.MX6ULL RM says:
2b'00: 800MHz; 2b'01: 850MHz; 2b'10: 1GHz; 2b'11: 1.2Ghz;
which seems incorrect. The commit [1] confirmed it, but I cannot find any
996MHz i.MX6UL
Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL
support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support
makes the board boot again.
Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support")
Signed-off-by: Sébastien Szy
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/mx6/opos6ul.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c
index ef70a7d323..5d39c0bc1b 100644
--- a/arch/arm/mach-imx/mx6/opos6ul.c
+++ b/arch/arm/mach
When booting in Serial Downloader mode load the U-Boot image using
ymodem.
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- Add commit log.
arch/arm/mach-imx/mx6/opos6ul.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach
Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL
support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support
makes the board boot again.
Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support")
Signed-off-by: Sébastien Sz
Hi Fabio,
On 04/17/2018 11:52 PM, Fabio Estevam wrote:
> Hi Sébastien,
>
> On Tue, Apr 17, 2018 at 12:29 PM, Sébastien Szymanski
> wrote:
>> When booting in Serial Downloader mode load the U-Boot image using
>> ymodem.
>
> Not sure if you are aware, but it is pos
>> ---
>> Afaik there is no board yet using SPL on 6UL/ULL...
>
> Not yet…
?
There are boards in the tree using SPL on i.MX6UL. OPOS6UL is one of them.
Regards,
Sébastien Szymanski
>
>>
>> arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++-
>> arch/ar
Hello,
> On 25 Aug 2017, at 13:33, Stefano Babic wrote:
>
> On 16/08/2017 02:49, Stefan Agner wrote:
>> From: Stefan Agner
>>
>> i.MX 6 serial downloader is not necessarily booting via UART but can
>> also boot from USB. In fact only some i.MX chips have serial
>> downloader support via UART (
Hello,
> On 27 Aug 2017, at 21:17, Stefan Agner wrote:
>
> On 2017-08-27 01:45, Sébastien Szymanski wrote:
>> Hello,
>>
>>> On 25 Aug 2017, at 13:33, Stefano Babic wrote:
>>>
>>> On 16/08/2017 02:49, Stefan Agner wrote:
>>>> Fr
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_GPIO
#undef CONFIG_DM_MMC
+#undef CONFIG_BLK
#define CONFIG_MXC_UART_BASE UART1_BASE
#endif
Otherwise, your change fixes the eMMC on the board.
Tested-by: Sébastien Szymanski
Thanks.
Regards,
--
Sébastie
Signed-off-by: Sébastien Szymanski
---
cmd/host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/host.c b/cmd/host.c
index 515621b..080b7cf 100644
--- a/cmd/host.c
+++ b/cmd/host.c
@@ -181,7 +181,7 @@ U_BOOT_CMD(
"host ls hostfs - - list
esize=51c970
=> ext4write host 0:2 0 /boot/opos6ul-linux.bin ${filesize}
File System is consistent
file found, deleting
update journal finished
File System is consistent
update journal finished
Segmentation fault
Regards,
>
> Kind regards,
>
> Stefan
Sébastien Szymanski
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 01/23/2017 05:38 PM, Brüns, Stefan wrote:
> On Freitag, 20. Januar 2017 18:32:49 CET Sébastien Szymanski wrote:
> [...]
>> Then under the sandbox I do the following:
>>
>> U-Boot 2017.01-2-g558e41e-dirty (Jan 20 2017 - 16:19:47 +0100)
>>
>> DRA
> warp riotboard_spl vining_2000 zc5601 zc5202 xpress pico-imx6ul dms-ba16-1g
> pico-pi-imx7d
> 02: configs: Resync with savedefconfig
> 03: Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
>
> configs/opos6uldev_defconfig | 1 +
> include/configs/opos6uldev
cksum error
[2.691982] EXT4-fs (mmcblk0p2): error loading journal
[2.698292] VFS: Cannot open root device "mmcblk0p2" or
unknown-block(179,2): error -74
Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.
Signed-off-by: Sébastien Szy
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/mx6/opos6ul.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c
index a578fd67db..55ebe3a624 100644
--- a/arch/arm/mach-imx/mx6/opos6ul.c
+++ b/arch/arm/mach-imx/mx6
The mxsfb driver already calls enable_lcdif_clock.
Signed-off-by: Sébastien Szymanski
---
board/armadeus/opos6uldev/board.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/armadeus/opos6uldev/board.c
b/board/armadeus/opos6uldev/board.c
index 4faa997126..aed334f8fb 100644
--- a
It's useless on the opos6uldev. Remove it.
Signed-off-by: Sébastien Szymanski
---
board/armadeus/opos6uldev/board.c | 21 -
1 file changed, 21 deletions(-)
diff --git a/board/armadeus/opos6uldev/board.c
b/board/armadeus/opos6uldev/board.c
index aed334f8fb..cbf40
Hi Fabio,
On 5/14/19 2:17 PM, Fabio Estevam wrote:
> On Tue, May 14, 2019 at 8:48 AM Sébastien Szymanski
> wrote:
>>
>> It's useless on the opos6uldev. Remove it.
>
> Why is it useless? No USB host on this port?
There is an USB host port but this function was jus
This function sets the polarity of the PWR signal which is not used on
the opos6uldev board. Remove it.
Reviewed-by: Fabio Estevam
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- better commit log
board/armadeus/opos6uldev/board.c | 21 -
1 file changed, 21
The mxsfb driver already calls enable_lcdif_clock.
Reviewed-by: Fabio Estevam
Signed-off-by: Sébastien Szymanski
---
Changes for v2:
- none
board/armadeus/opos6uldev/board.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/armadeus/opos6uldev/board.c
b/board/armadeus/opos6uldev
This converts the following to Kconfig:
CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
Signed-off-by: Sébastien Szymanski
---
configs/warp7_defconfig | 1 +
configs/warp_defconfig | 1 +
drivers/mmc/Kconfig | 6 ++
include/configs/warp.h | 1 -
include/configs/warp7.h | 1
This significally increases performance:
reading zImage, without DDR:
6203640 bytes read in 157 ms (37.7 MiB/s)
reading zImage, with DDR:
6203640 bytes read in 88 ms (67.2 MiB/s)
Signed-off-by: Sébastien Szymanski
---
configs/opos6uldev_defconfig | 1 +
1 file changed, 1 insertion(+)
diff
Hello,
On 9/9/19 3:59 AM, Peng Fan wrote:
>> Subject: [PATCH 1/2] Convert CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE to
>> Kconfig
>>
>> This converts the following to Kconfig:
>>
>> CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
>>
>> Signed-off-by: Sébastien Szyman
Migrate to DM_ETH and remove code that is no longer necessary.
Signed-off-by: Sébastien Szymanski
---
arch/arm/mach-imx/mx6/opos6ul.c | 76 +++--
configs/opos6uldev_defconfig| 2 +
include/configs/opos6uldev.h| 8
3 files changed, 8 insertions(+), 78
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.
Signed-off-by: Sébastien Szymanski
---
arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 10 ++
arch/arm/dts/imx6ul-opos6uldev.dts | 4 +--
board/armadeus/opos6uldev/board.c | 36
Set gd->fb_base so it can be shown with bdinfo command.
Signed-off-by: Sébastien Szymanski
---
drivers/video/mxsfb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 6922a130c6..ce67f3f32b 100644
--- a/drivers/video/mxsfb.c
+++ b/driv
[1] https://www.rfc-editor.org/rfc/rfc1813.html#page-106
Fixes: b0baca982048 ("net: NFS: Add NFSv3 support")
Signed-off-by: Sébastien Szymanski
---
net/nfs.c | 18 +-
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/net/nfs.c b/net/nfs.c
index 7a8887ef2368..
Fixed misspelled 'disable' in help text.
Signed-off-by: Sébastien Szymanski
---
cmd/pwm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/pwm.c b/cmd/pwm.c
index 7947e61aee..7e82955239 100644
--- a/cmd/pwm.c
+++ b/cmd/pwm.c
@@ -111,5 +111,5 @@ U_BOOT_CMD
les, we must also reorder
> the FIT image script to make sure that the loadables are last in
> the FIT image.
>
> Signed-off-by: Patrick Wildt
>
Thanks to this patch, I was able to push a FIT image (ATF, U-Boot, dtb)
using yModem, so:
Tested-by: Sébastien Szymanski
Regard
Signed-off-by: Sébastien Szymanski
---
configs/opos6uldev_defconfig | 3 ---
1 file changed, 3 deletions(-)
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index c52d2a5d39..409c48451e 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
6-rc2&id=53990e416bb7adaa59d045f325a47f31a11b75ee
Signed-off-by: Sébastien Szymanski
---
drivers/video/mxsfb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 98d2965711..7aeea4b23f 100644
--- a/drivers/video/mxsfb.c
+++
the function
fdt_setprop() called in the function disable_thermal_cpu_nodes(). With
the variable type fixed, the error at boot is gone and the property is
properly set:
$ dtc -I dtb /sys/firmware/fdt | grep cooling-device
cooling-device = <0x08 0x 0x>;
Signed-off-by: Sébastien Sz
100 matches
Mail list logo
