From: Alice Guo <alice....@nxp.com> When CLK is enabled, get_lpuart_clk_rate() needs to get a per clock of lpuart, so that add a per clock for lpuart1.
Signed-off-by: Alice Guo <alice....@nxp.com> Reviewed-by: Ye Li <ye...@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com> --- This commit comes from downstream U-Boot: https://github.com/nxp-imx/uboot-imx/commit/6cc90f4e65d5803f5e15765602febee8166708eb arch/arm/dts/imx93.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/imx93.dtsi b/arch/arm/dts/imx93.dtsi index 13cf32d4b277..90de635481f9 100644 --- a/arch/arm/dts/imx93.dtsi +++ b/arch/arm/dts/imx93.dtsi @@ -254,8 +254,8 @@ compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART1_GATE>; - clock-names = "ipg"; + clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; -- 2.41.0