The i.MX93 11x11 EVK fails to boot with following error:
Model: NXP i.MX93 11X11 EVK board
DRAM: 2 GiB
Error binding driver 'imx93-adc': -96
Some drivers failed to bind
Error binding driver 'simple_bus': -96
Some drivers failed to bind
Error binding driver 'simple_bus': -96
Some drivers failed to bind
initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96)
### ERROR ### Please RESET the board ###
That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc
support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not.
Fix this by enabling CONFIG_ADC in imx93_11x11_evk_defconfig.
Make sure this situation won't happen again in future i.MX93 defconfig by
making CONFIG_ADC_IMX93 depend on CONFIG_ADC.
Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
---
configs/imx93_11x11_evk_defconfig | 1 +
drivers/adc/Kconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/imx93_11x11_evk_defconfig
b/configs/imx93_11x11_evk_defconfig
index 89130c437d6d..7a7978c280a5 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -81,6 +81,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_ADC=y
CONFIG_ADC_IMX93=y
CONFIG_CPU=y
CONFIG_CPU_IMX=y
diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig
index 4336732dee56..a01d73846b74 100644
--- a/drivers/adc/Kconfig
+++ b/drivers/adc/Kconfig
@@ -66,6 +66,7 @@ config STM32_ADC
config ADC_IMX93
bool "Enable NXP IMX93 ADC driver"
+ depends on ADC
help
This enables basic driver for NXP IMX93 ADC.
It provides:
--
2.41.0
