This implementation is a specific utilisation with CONFIG_FIT.
This feature use script for boot. With distrobootcmd is possible
to load script.
Signed-off-by: Joris Offouga
---
include/configs/pico-imx7d.h | 30 --
1 file changed, 30 deletions(-)
diff --git a
This implementation is a specific utilisation with CONFIG_FIT.
This feature use script for boot. With distrobootcmd is possible
to load script.
Signed-off-by: Joris Offouga
Reviewed-by: Otavio Salvador
---
Changes v1 -> v2
- Remove missing endif
include/configs/pico-imx7d.h |
_OFFSET and use
CONFIG_BOARD_SIZE_LIMIT to detect such problem in build-time.
You're right, I agree with that ;)
I agree with you ;)
So,
Acked-by: Pierre-Jean Texier
Tested-by: Pierre-Jean Texier
Acked-by: Joris Offouga
Tested-by: Joris Offouga
Best regards,
Joris
"run do_bootscript_hab;" \
"if run loadbootscript; then " \
Reviewed-by: Joris Offouga
Best regards,
Joris Offouga
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
USDHC3_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
Reviewed-by: Joris Offouga
Tested-by: Joris Offouga
Best regards,
Joris Offouga
___
U-Boot mailing list
U-Boot@lists.denx.de
https
Hello,
I try to use the usb on u imx8mm but the usb controller does not seem
recognized:
u-boot => usb start
starting USB ...
Do you have an idea ?
Best regards
Joris Offouga
Hi Peng,
Thanks for your reply.
Will it be done in the near future, if not can you give me
recommendations to do it?
Best regards,
Joris Offouga
Le 22/06/2020 à 03:14, Peng Fan a écrit :
It is not supported for now.
Regards,
Peng.
Subject: Usb on imx8mm
Hello,
I try to use the usb on
from MMC... OK
Video: 480x272x24
In:serial
Out: serial
Err: serial
Net: Could not get PHY for FEC0: addr 0
No ethernet found.
So Ethernet is not functional at all.
Do you plan to fix Ethernet on this board?
On Sun, Dec 8, 2019 at 2:02 PM Joris Offouga wrote:
Also sync device tree with
Hi Fabio,
Le 20/01/2020 à 21:22, Fabio Estevam a écrit :
Hi Joris,
On Mon, Jan 20, 2020 at 5:21 PM Joris Offouga wrote:
Sorry for that indeed I should have made two different commit for this,
I have the idea to revert the commit and I will send it split in two
No need to revert. Let&#
Hi Fabio,
Le 20/01/2020 à 21:28, Fabio Estevam a écrit :
Hi Joris,
On Mon, Jan 20, 2020 at 5:26 PM Joris Offouga wrote:
I think this bug is similar to the wandboard, I looked at this thread
fairly quickly, did you finally fix it?
Which wandboard issue are you referring to?
This thread
... OK
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@30be
Hit any key to stop autoboot: 0
So, can you consider this commit 'not applicable' for next release ?
[1]
https://gitlab.denx.de/u-boot/u-boot/commit/1526bcce0f7285087621e16e6720636d01839da8
Best regards,
Joris Offouga
Hi Fabio,
Le lun. 27 janv. 2020 à 16:58, Fabio Estevam a écrit :
> Hi Joris,
>
> On Mon, Jan 20, 2020 at 5:37 PM Fabio Estevam wrote:
> >
> > Hi Joris,
> >
> > On Mon, Jan 20, 2020 at 5:32 PM Joris Offouga
> wrote:
> >
> > > This thread
nuary/398438.html
I good catch, I will test your patch soon
Best regards
Joris Offouga
>
>
Loading Environment from MMC... OK
Video: 480x272x24
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@30be using MAC address from ROM
eth0: ethernet@30be0000
Hit any key to stop autoboot: 0
thanks
Tested-by: Joris Offouga
Best regards,
Joris
With commit 6b503f ("warp7: Switch to DM USB").
This configs are not necessary
Signed-off-by: Joris Offouga
---
include/configs/warp7.h | 4
1 file changed, 4 deletions(-)
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index da894ec0ca..49d2415445 100644
---
Before:
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
usb dr_mode not found
CTRL+C - Operation aborted
=> dfu 0 mmc 0
usb dr_mode not found
After :
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
=> dfu 0 mmc 0
Signed-off-by: J
Signed-off-by: Joris Offouga
---
board/warp7/warp7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
index 9efc62f2fb..1ebec93916 100644
--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -67,7 +67,7 @@ int power_init_board(void
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7s-warp-u-boot.dtsi | 10 ++
arch/arm/dts/imx7s-warp.dts | 9 -
2 files changed, 10 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/dts/imx7s-warp-u-boot.dtsi
diff --git a/arch/arm/dts/imx7s-warp-u-boot.dtsi
b
Le 29/01/2020 à 21:25, Fabio Estevam a écrit :
On Wed, Jan 29, 2020 at 5:16 PM Joris Offouga wrote:
diff --git a/arch/arm/dts/imx7d-sdb-u-boot.dtsi
b/arch/arm/dts/imx7d-sdb-u-boot.dtsi
index 05dd74eee1..b78358fa13 100644
--- a/arch/arm/dts/imx7d-sdb-u-boot.dtsi
+++ b/arch/arm/dts/imx7d-sdb
Le 29/01/2020 à 21:22, Fabio Estevam a écrit :
Hi Joris,
On Wed, Jan 29, 2020 at 5:16 PM Joris Offouga wrote:
Please always provide a commit log.
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7s-warp-u-boot.dtsi | 10 ++
arch/arm/dts/imx7s-warp.dts | 9 -
2
With commit 6b503f9e6549("warp7: Switch to DM USB").
These configs are not necessary
Signed-off-by: Joris Offouga
---
changes v1->v2:
add 12 digits for commit ID
fix typo in commit log
include/configs/warp7.h | 4
1 file changed, 4 deletions(-)
diff --git a/include/conf
These nodes are not in upstream kernel, so move these in u-boot.dtsi
Signed-off-by: Joris Offouga
---
changes v1->v2:
fix stdoutpath in to stdout-path
add commit log
arch/arm/dts/imx7s-warp-u-boot.dtsi | 10 ++
arch/arm/dts/imx7s-warp.dts | 9 -
2 files changed,
When pmic_get() is used with DM the first parameter must be
the complete node name plus the unit address, so fix it
accordingly
Signed-off-by: Joris Offouga
Reviewed-by: Fabio Estevam
---
changes v1->v2:
add commit log
change commit message
add reviewed
board/warp7/warp7.c | 2 +-
1 f
Before:
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
usb dr_mode not found
CTRL+C - Operation aborted
=> dfu 0 mmc 0
usb dr_mode not found
After :
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
=> dfu 0 mmc 0
Signed-off-by: J
Hi Stefano,
Sorry for the delay,
Le 28/12/2019 à 12:31, Stefano Babic a écrit :
Hi Joris,
On 08/12/19 18:02, Joris Offouga wrote:
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 46
configs/pico-dwarf-imx7d_defconfig | 5
Signed-off-by: Joris Offouga
---
Change v1 -> v2
Disable usb ethernet support with patch : pico-imx7d: Disable USB_ETHER
support for bl33
board/technexion/pico-imx7d/pico-imx7d.c | 46
configs/pico-dwarf-imx7d_defconfig | 5 +++
configs/pico-hob
For DM_ETH support , it's require to disable this config.
When this config is enable, This generate a error with spl in linker script
Signed-off-by: Joris Offouga
---
configs/pico-imx7d_bl33_defconfig | 3 ---
1 file changed, 3 deletions(-)
diff --git a/configs/pico-imx7d_bl33_defconf
With commit mx7dsabre: Enable DM_ETH 0d52bab4
Device Tree has been update and change pfuze3000 node
Signed-off-by: Joris Offouga
---
board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c
b/board
Le 22/01/2019 à 10:47, Lukasz Majewski a écrit :
On Sun, 20 Jan 2019 23:38:32 +0100
Joris Offouga wrote:
Hi all,
Pinctrl, GPIO, I2C, MMC, ETH are converted.
Convert PMIC is the same of warp7 but i have a some erros, si this
log : U-Boot SPL 2019.01-00197-ga524e5d-dirty (Jan 20 2019 - 21:09
Le 31/01/2019 à 13:39, Otavio Salvador a écrit :
On Thu, Jan 31, 2019 at 9:54 AM Offouga Joris wrote:
On 31 Jan 2019, at 12:36, Otavio Salvador
wrote:
On Thu, Jan 31, 2019 at 1:59 AM Offouga Joris wrote:
The PMIC problem occurs after the dm conversion
It'd be good if you could rework the
Hi all,
I try to convert Pico-Pi i.MX7D to DM but I'm having some trouble with
pmic and ethernet.
you can see the log lower
Do you have an idea to solve this?
Thanks in advance.
Best Regards,
Joris Offouga
___
U-Boot mailing list
U
red dfu_flush() failed!=>
Thanks a advance for your help.
Best Regards,
Joris Offouga
Joris Offouga (9):
Arm: dts: imx7d-pico: Import Linux pico-pi dts
Arm: imx7d-pico: Add DT file hooks
pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
arm: imx7d-pico-pi: Convert to
This patch imports the Linux kernel base board imx7d-pico.dtsi and specific
dts for imx7d-pico-pi
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-pi.dts | 93 +++
arch/arm/dts/imx7d-pico.dtsi | 588 +
2 files changed, 681 insertions
This commit switches to DM I2C for pico-pi-imx7d.
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 24
configs/pico-pi-imx7d_defconfig | 1 +
include/configs/pico-imx7d.h | 5 -
3 files changed, 1 insertion(+), 29
This patch is necessary for convert pico-pi-imx7 to dm driver model
Signed-off-by: Joris Offouga
---
configs/pico-pi-imx7d_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index ce43393..80f5739 100644
--- a
This patch adds DT file hooks for imx7d-pico-pi.dtb
Signed-off-by: Joris Offouga
---
arch/arm/dts/Makefile | 3 ++-
configs/pico-pi-imx7d_defconfig | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b2ca87d
Furthermore this patch create un alias for mmc0 to usdch3 because before the
convertion he was the only one described in the pico-imx7d.c.
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-pi.dts | 4
board/technexion/pico-imx7d/pico-imx7d.c | 36
This commit switches to DM UART for pico-imx7d-pico.
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-pi.dts | 4
configs/pico-pi-imx7d_defconfig | 1 +
2 files changed, 5 insertions(+)
diff --git a/arch/arm/dts/imx7d-pico-pi.dts b/arch/arm/dts/imx7d-pico-pi.dts
index d4aca96
Furthermore this patch fix request gpio_direction_ouput with gpio_request
require because DM GPIO is enable
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 1 +
configs/pico-pi-imx7d_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/board
Furthermore this patch create a aliase for usb0 to usbotg1.
This usb is used for mass storage and dfu.
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-pi.dts | 1 +
configs/pico-pi-imx7d_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx7d-pico-pi.dts b
This patch converts the pico-pi-imx7d to use the DM PMIC model.
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 44
configs/pico-pi-imx7d_defconfig | 6 +
include/configs/pico-imx7d.h | 6 -
3 files
red dfu_flush() failed!=>
Thanks a advance for your help.
Best Regards,
Joris Offouga
Joris Offouga (9):
Arm: dts: imx7d-pico: Import Linux pico-pi dts
Arm: imx7d-pico: Add DT file hooks
pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
arm: imx7d-pico-pi: Convert to
This patch enable usb support with device-tree
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico.dtsi | 2 ++
board/technexion/pico-imx7d/pico-imx7d.c | 13 -
configs/pico-hobbit-imx7d_defconfig | 1 +
configs/pico-imx7d_bl33_defconfig| 1
Acked-by: Joris Offouga
Le 12/04/2019 à 22:36, Pierre-Jean Texier a écrit :
After DM conversion, U-Boot is larger than 512 KiB, so we need to increase
the "size" of the dfu_alt_info setting.
Signed-off-by: Pierre-Jean Texier
---
include/configs/warp7.h | 2 +-
1 file changed, 1
Hi Fabio,
Le 13/04/2019 à 18:31, Fabio Estevam a écrit :
Hi Pierre-Jean,
On Sat, Apr 13, 2019 at 11:38 AM Pierre-Jean Texier
wrote:
-int board_usb_phy_mode(int port)
-{
- return USB_INIT_DEVICE;
-}
-
It seems that #include can also be removed now.
I still see uart related code in th
Le jeu. 25 avr. 2019 à 11:00, Stefano Babic a écrit :
> On 04/04/19 14:00, Joris Offouga wrote:
> > This patch adds DT file hooks for Pico i.MX7D SOM and variant boards
> >
> > Signed-off-by: Joris Offouga
> > ---
> > configs/pico-hobbit-imx7d_de
Le jeu. 25 avr. 2019 à 11:12, Stefano Babic a écrit :
> On 25/04/19 11:00, Stefano Babic wrote:
> > On 04/04/19 14:00, Joris Offouga wrote:
> >> This patch adds DT file hooks for Pico i.MX7D SOM and variant boards
> >>
> >> Signed-off-by: Joris Offouga
Le 25/04/2019 à 11:26, Stefano Babic a écrit :
On 25/04/19 11:18, Joris OFFOUGA wrote:
Le jeu. 25 avr. 2019 à 11:12, Stefano Babic mailto:sba...@denx.de>> a écrit :
On 25/04/19 11:00, Stefano Babic wrote:
> On 04/04/19 14:00, Joris Offouga wrote:
>> This pat
Le 25/04/2019 à 12:28, Stefano Babic a écrit :
On 25/04/19 11:57, Joris Offouga wrote:
Le 25/04/2019 à 11:26, Stefano Babic a écrit :
On 25/04/19 11:18, Joris OFFOUGA wrote:
Le jeu. 25 avr. 2019 à 11:12, Stefano Babic mailto:sba...@denx.de>> a écrit :
On 25/04/19 11:00, Stefano
d u-boot-dtb.img into the eMMC running the following commands on a
PC:
$ sudo dfu-util -D SPL -a spl
-$ sudo dfu-util -D u-boot.img -a u-boot
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
Remove power from the pico board.
Acked-by: Joris Offo
Tested-by: Joris Offouga
Le 03/05/2019 à 14:25, Fabio Estevam a écrit :
Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver") causes some i.MX boards that were converted
to DM, such as warp7, to fail to boot.
As explained by Lukas Auer:
"With th
Hi Fabio,
Tested-by Joris Offouga
BR,
Joris
Le ven. 3 mai 2019 à 19:20, Pierre-Jean Texier a
écrit :
> Hi Fabio,
>
> Le 03/05/2019 à 19:05, Fabio Estevam a écrit :
> > Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
> > simple-bus driver") ca
Hi Fabio
Tested-by Joris Offouga
BR
Joris
Le ven. 3 mai 2019 à 19:05, Fabio Estevam a écrit :
> Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
> simple-bus driver") causes some i.MX boards that were converted
> to DM, such as warp7, to fail to boot.
GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> CONFIG_CI_UDC=y
> -CONFIG_VIDEO=y
> CONFIG_OF_LIBFDT=y
> --
> 2.17.1
>
Tested-by: Joris Offouga
>
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
From: Joris Offouga
This series introduce DM Conversion for Pico i.MX7 Som and
variant boards
Joris Offouga (5):
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
pico-imx7d: defconfig: Add DT file hooks
pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
This patch adds DT file hooks for Pico i.MX7D SOM and variant boards
Signed-off-by: Joris Offouga
---
configs/pico-hobbit-imx7d_defconfig | 3 ++-
configs/pico-imx7d_defconfig| 3 ++-
configs/pico-pi-imx7d_defconfig | 3 ++-
3 files changed, 6 insertions(+), 3 deletions(-)
diff
This patch is necessary for convert this board to dm driver model
DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 4 +++-
configs/pico-hobbit-imx7d_defconfig | 3
This patch imports the Linux kernel base board imx7d-pico.dtsi,
pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts
from Linux v5.1-rc1.
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-hobbit.dts | 105 ++
arch/arm/dts/imx7d-pico-pi.dts | 93 +
arch/arm/dts
: Joris Offouga
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx7d-pico.dtsi | 4 +++
board/technexion/pico-imx7d/pico-imx7d.c | 38
board/technexion/pico-imx7d/spl.c| 38
configs/pico-hobbit-imx7d_defconfig | 1
After DM conversion, the size of U-Boot binary to increase.
Previous size is 480K after DM Conversion the new size is 557K
So it's necessary to increase the dfu request for store u-boot-dtb.img in eMMC.
Signed-off-by: Joris Offouga
---
include/configs/pico-imx7d.h | 2 +-
1 file chang
This series introduce DM Conversion for Pico i.MX7 Som and
variant boards
Joris Offouga (5):
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
pico-imx7d: defconfig: Add DT file hooks
pico-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
pico-imx7d: Convert DM
Le 03/04/2019 à 22:40, Otavio Salvador a écrit :
On Mon, Mar 25, 2019 at 10:42 AM Fabio Estevam wrote:
On Mon, Mar 25, 2019 at 9:52 AM Joris Offouga wrote:
This patch imports the Linux kernel base board imx7d-pico.dtsi,
pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts
from
Le 04/04/2019 à 10:28, Joris Offouga a écrit :
Le 03/04/2019 à 22:40, Otavio Salvador a écrit :
On Mon, Mar 25, 2019 at 10:42 AM Fabio Estevam
wrote:
On Mon, Mar 25, 2019 at 9:52 AM Joris Offouga
wrote:
This patch imports the Linux kernel base board imx7d-pico.dtsi,
pi board imx7d-pico
: Joris Offouga
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx7d-pico.dtsi | 4
board/technexion/pico-imx7d/pico-imx7d.c | 38
board/technexion/pico-imx7d/spl.c| 38
configs/pico-hobbit-imx7d_defconfig
After DM conversion, the size of U-Boot binary to increase.
Previous size is 480K after DM Conversion the new size is 557K
So it's necessary to increase the dfu request for store u-boot-dtb.img in eMMC.
Signed-off-by: Joris Offouga
---
include/configs/pico-imx7d.h | 2 +-
1 file chang
This patch adds DT file hooks for Pico i.MX7D SOM and variant boards
Signed-off-by: Joris Offouga
---
configs/pico-hobbit-imx7d_defconfig | 3 ++-
configs/pico-imx7d_defconfig| 3 ++-
configs/pico-pi-imx7d_defconfig | 3 ++-
3 files changed, 6 insertions(+), 3 deletions(-)
diff
This series convert Pico i.MX7 and variant board to DM.
The following options have been enabled:
-CONFIG_DM_GPIO
-CONFIG_DM_EMMC
Signed-off-by: Joris Offouga
---
Change in v2:
- add missing dtb in Makefile
Joris Offouga (5):
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
This patch imports the Linux kernel base board imx7d-pico.dtsi,
pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts
from Linux v5.1-rc1.
Signed-off-by: Joris Offouga
---
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/imx7d-pico-hobbit.dts | 105 +++
arch/arm/dts
This patch is necessary for convert this board to dm driver model
DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation
Signed-off-by: Joris Offouga
---
board/technexion/pico-imx7d/pico-imx7d.c | 4 +++-
configs/pico-hobbit-imx7d_defconfig | 3
Le ven. 5 avr. 2019 à 15:07, Fabio Estevam a écrit :
> Hi Joris,
>
Hi Fabio,
> On Thu, Apr 4, 2019 at 9:01 AM Joris Offouga
> wrote:
> >
> > This series convert Pico i.MX7 and variant board to DM.
> > The following options have been enabled:
> >
OK
## Loading fdt from FIT Image at 8600 ...
Using 'c...@imx7d-pico-pi.dtb' configuration
Trying 'f...@imx7d-pico-pi.dtb' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Star
Le 09/02/2019 à 15:01, Fabio Estevam a écrit :
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.
Signed-off-by: Fabio Estevam
---
Changes since v1:
- Fix all occurrances
board/warp7/README | 12 ++--
1 file changed, 6 inserti
pico-mx6ul boards.
If you have any questions, just let me know.
Since I do not convert the pmic, I do not convert the i2c either ?
Regards,
Joris Offouga
Regards,
Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de
Hi Fabio
On 14 Feb 2019, at 17:48, Fabio Estevam wrote:
Hi Joris,
On Thu, Feb 14, 2019 at 2:42 PM Joris Offouga wrote:
Since I do not convert the pmic, I do not convert the i2c either ?
I think it is OK to convert I2C now.
it is not possible to convert that i2c and do not convert the
Le 15/02/2019 à 00:08, Fabio Estevam a écrit :
Hi Joris,
On Thu, Feb 14, 2019 at 8:46 PM Joris Offouga wrote:
it is not possible to convert that i2c and do not convert the pmic. on
Ok, we can skip I2C and PMIC for now.
the other hand, even without pmic and usb conversion there is always
Le 16/02/2019 à 13:17, Fabio Estevam a écrit :
Hi Joris,
On Sat, Feb 16, 2019 at 9:06 AM Offouga Joris wrote:
Hi Fabio
I followed Lukasz's advice and I increased the size of the U-Boot in the
dfu_alt_info and there is no more error. However, once the SPL and U-Boot are
changed and the boa
Le 16/02/2019 à 13:46, Fabio Estevam a écrit :
On Sat, Feb 16, 2019 at 10:34 AM Joris Offouga wrote:
Le 16/02/2019 à 13:17, Fabio Estevam a écrit :
Hi Joris,
On Sat, Feb 16, 2019 at 9:06 AM Offouga Joris wrote:
Hi Fabio
I followed Lukasz's advice and I increased the size of the U
Le 16/02/2019 à 14:58, Fabio Estevam a écrit :
On Sat, Feb 16, 2019 at 11:02 AM Joris Offouga wrote:
Yes , download with dfu it's okay but after rebooting the SPL does not
load.
Does it boot if you flash SPL and u-boot-dtb.img via "ums 0 mmc 0" command?
By doing this the
Le 16/02/2019 à 15:42, Fabio Estevam a écrit :
Hi Joris,
Hi Fabio,
On Sat, Feb 16, 2019 at 12:38 PM Joris Offouga wrote:
By doing this the SPL still does not find the U-Boot binary always this
same log:
U-Boot SPL 2019.04-rc1-00142-g7fe4b77-dirty (Feb 16 2019 - 13:58:30
+0100)
Trying
Le 16/02/2019 à 15:54, Fabio Estevam a écrit :
On Sat, Feb 16, 2019 at 12:52 PM Joris Offouga wrote:
Ok, thanks for your help :).
I worked new commits do you want me to update the RFC in v2?
Please generate your series against the latest u-boot-imx tree.
However, I observed the hang when
Le 16/02/2019 à 16:25, Fabio Estevam a écrit :
On Sat, Feb 16, 2019 at 1:14 PM Joris Offouga wrote:
Actually on the top of u-boot-imx there is a blocking when loading
u-boot-dtb.img with imx_usb_loader.
Just run a "git bisect" and the problem comes fro
dfu_alt_info we already talked about
it but the solution with raw u-boot 0x45 800 does not work do you have
another idea?
Thanks,
Joris Offouga
Thanks,
Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
This reverts commit 9e3c0174da842dd88f5feaffbf843ba332233897.
This commit causes the crash of U-Boot when loaded with imx-usb-loader
---
board/technexion/pico-imx7d/pico-imx7d.c | 55
configs/pico-hobbit-imx7d_defconfig | 1 -
configs/pico-imx7d_defconfig
Le 11/03/2019 à 17:52, Stefano Babic a écrit :
Hi Joris,
Hi Stephano,
On 10/03/19 19:52, Joris Offouga wrote:
This reverts commit 9e3c0174da842dd88f5feaffbf843ba332233897.
This commit causes the crash of U-Boot when loaded with imx-usb-loader
---
board/technexion/pico-imx7d/pico-imx7d.c
Le 11/03/2019 à 20:04, Fabio Estevam a écrit :
Hi Joris,
On Mon, Mar 11, 2019 at 3:27 PM Joris Offouga wrote:
I agree with you, but I have not managed to find the bug, Fabio also
searched and did not find. If I can get help of course I will look for
more, being a junior I wait for advice
This reverts commit 9e3c0174da842dd88f5feaffbf843ba332233897.
This commit breaks U-Boot when is load with imx-usb-loader.
Signed-off-by: Joris Offouga
---
Changes for v2:
- Add missing signed-off
---
board/technexion/pico-imx7d/pico-imx7d.c | 55
configs/pico
Hi Pierre-Jean
It's work on my side.
Tested-by Joris Offouga
Best Regards,
Joris Offouga
Le ven. 23 août 2019 à 23:04, Pierre-Jean Texier a
écrit :
> The following error appears:
>
> tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand
Hi Pierre-Jean
It's work on my side.
Tested-by Joris Offouga
Best Regards,
Joris Offouga
Le ven. 23 août 2019 à 23:05, Pierre-Jean Texier a
écrit :
> Since commit af95f20 ("env: Create a new file for environment functions"),
> a new header file exists.
>
> So
Hi Pierre-Jean
It's work on my side.
Tested-by Joris Offouga
Best Regards,
Joris Offouga
Le ven. 23 août 2019 à 23:04, Pierre-Jean Texier a
écrit :
> Since commit d3716dd ("env: Rename the redundancy flags"), the
> definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_AC
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico.dtsi | 113 ++-
board/technexion/pico-imx7d/pico-imx7d.c | 48 --
configs/pico-hobbit-imx7d_defconfig | 2 +-
configs/pico-imx7d_bl33_defconfig| 2 +-
configs/pico-imx7d_defconfig
HI Peng,
I send v2 with your suggest
Best Regards,
Joris Offouga
Le 29/08/2019 à 11:35, Peng Fan a écrit :
Subject: [PATCH] pico-imx7d: Convert to DM_VIDEO
Please write something here.
And use x-u-boot.dtsi for uboot specific dts change.
Regards,
Peng.
Signed-off-by: Joris Offouga
This commit introduce u-boot.dtsi
Signed-off-by: Joris Offouga
Suggested-by: Peng Fan
---
arch/arm/dts/imx7d-pico-u-boot.dtsi | 11 +++
arch/arm/dts/imx7d-pico.dtsi| 8 +---
2 files changed, 12 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/dts/imx7d-pico-u
This commit convert all pico-imx7d to DM_VIDEO
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico-u-boot.dtsi | 113 +++
board/technexion/pico-imx7d/pico-imx7d.c | 48 --
configs/pico-hobbit-imx7d_defconfig | 2 +-
configs/pico-imx7d_bl33_defconfig
Synchronize device tree with v5.3-rc6 label
Signed-off-by: Joris Offouga
---
arch/arm/dts/imx7d-pico.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi
index 33b308ac24..57391fc052 100644
--- a/arch/arm/dts/imx7d
Hi Otavio,
Can you test and apply my series in your pull request ?
https://patchwork.ozlabs.org/patch/1155917/
https://patchwork.ozlabs.org/patch/1155916/
https://patchwork.ozlabs.org/patch/1155914/
Best Regards,
Joris Offouga
Le jeu. 12 sept. 2019 à 21:38, Otavio Salvador
Hello,
Just put CONFIG_DM_VIDEO in the defconfig
Best regards,
Joris Offouga
Le 12/09/2019 à 23:18, Otavio Salvador a écrit :
Hello,
On Thu, Sep 12, 2019 at 5:20 PM Joris Offouga wrote:
Can you test and apply my series in your pull request ?
% grep CONFIG_VIDEO configs/pico-*7d
Hi Otavio,
I adjust my repo with your PR, you can find commits here:
https://github.com/jorisoffouga/u-boot/commits/pico-imx7-2019.10-2
Best Regards,
Joris Offouga
Le 13/09/2019 à 16:36, Otavio Salvador a écrit :
On Thu, Sep 12, 2019 at 6:27 PM Joris Offouga wrote:
Just put
+Stefano Babic
Le 14/09/2019 à 11:56, Joris Offouga a écrit :
Hi Otavio,
I adjust my repo with your PR, you can find commits here:
https://github.com/jorisoffouga/u-boot/commits/pico-imx7-2019.10-2
Best Regards,
Joris Offouga
Le 13/09/2019 à 16:36, Otavio Salvador a écrit :
On Thu, Sep 12
Hi Stefano,
Thanks
Best regards,
Joris
Le 14/09/2019 à 13:20, Stefano Babic a écrit :
Hi Joris,
I am pulling all patches for the release, I wil ltake care of yours, too.
Regards,
Stefano
On 14/09/19 12:01, Joris Offouga wrote:
+Stefano Babic
Le 14/09/2019 à 11:56, Joris Offouga a écrit
Hi Stefano,
You don't apply my series in your PR?
Best Regards,
Joris Offouga
Le lun. 16 sept. 2019 à 10:13, Stefano Babic a écrit :
> Hi Tom,
>
> please pull from u-boot-imx, thanks.
>
> There is still a broken board (imx6dl_mamoj) - it will be fixed later.
>
> T
1 - 100 of 117 matches
Mail list logo
