Le 16/02/2019 à 15:42, Fabio Estevam a écrit :
Hi Joris,
Hi Fabio,
On Sat, Feb 16, 2019 at 12:38 PM Joris Offouga <offougajo...@gmail.com> wrote:
By doing this the SPL still does not find the U-Boot binary always this
same log:
U-Boot SPL 2019.04-rc1-00142-g7fe4b77-dirty (Feb 16 2019 - 13:58:30
+0100)
Trying to boot from MMC1
Yes, just tried it and I saw the same here.
I started from scratch and used top of tree U-Boot.
When I load it via USB I see a hang:
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU: Commercial temperature grade (0C to 95C) at 50C
Reset cause: POR
Board: i.MX7D PICOSOM
I2C: ready
DRAM: 512 MiB
...
So this is a regression and I will try to bisect it.
Ok, thanks for your help :).
I worked new commits do you want me to update the RFC in v2?
Best Regards,
Joris
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot