This implementation is a specific utilisation with CONFIG_FIT.
This feature use script for boot. With distrobootcmd is possible
to load script.

Signed-off-by: Joris Offouga <offougajo...@gmail.com>
---
 include/configs/pico-imx7d.h | 30 ------------------------------
 1 file changed, 30 deletions(-)

diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 5abf80a292..26eef59393 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -45,21 +45,6 @@
                "/boot/imx7d-pico-pi.dtb ext4 0 1;" \
                "rootfs part 0 1\0" \
 
-/* When booting with FIT specify the node entry containing boot.scr */
-#if defined(CONFIG_FIT)
-#define PICO_BOOT_ENV \
-       "bootscr_fitimage_name=bootscr\0" \
-       "bootscriptaddr=0x83200000\0" \
-       "fdtovaddr=0x83100000\0" \
-       "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "rootwait rw;\0" \
-       "loadbootscript=" \
-               "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-       "source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
-#else
 #define PICO_BOOT_ENV \
        "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
                "setenv fdtfile imx7d-pico-hobbit.dtb\0" \
@@ -70,8 +55,6 @@
        "bootmenu_3=Boot using PICO-Pi baseboard=" \
                "setenv fdtfile imx7d-pico-pi.dtb\0" \
        BOOTENV
-#endif
-
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
@@ -105,19 +88,6 @@
        "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
        PICO_BOOT_ENV
 
-#if defined(CONFIG_FIT)
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev};" \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "if run loadbootscript; then " \
-                       "iminfo ${bootscriptaddr};" \
-                       "if test $? -eq 1; then hab_failsafe; fi;" \
-                       "run bootscript; " \
-               "else " \
-                       "echo Fail to load fitImage with boot script;" \
-                       "hab_failsafe;" \
-               "fi; " \
-       "fi"
 #endif
 
 #define BOOT_TARGET_DEVICES(func) \
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to