In commands like 'ls mmc 0:f' the partition number is hexadecimal.
In command 'gpt setenv' variable gpt_partition_entry needs to be set
to a hexadecimal value to allow its use as a parameter in a
subsequent command.
Signed-off-by: Heinrich Schuchardt
---
cmd/gpt.c | 2 +
On 8/25/23 21:38, Joshua Watt wrote:
Adds initial documentation for the gpt command
Thanks a lot for filling the gap.
Signed-off-by: Joshua Watt
---
doc/usage/cmd/gpt.rst | 141 ++
doc/usage/index.rst | 1 +
2 files changed, 142 insertions(+)
On 8/25/23 07:57, Masahisa Kojima wrote:
On Thu, 24 Aug 2023 at 09:11, AKASHI Takahiro
wrote:
Hi Kojima-san,
On Wed, Aug 23, 2023 at 05:37:19PM +0900, Masahisa Kojima wrote:
This adds the URI device path option for 'boot add' subcommand.
User can add the URI load option for downloading ISO i
This is a stub describing how TPL, VPL, and SPL load the next boot stages
on a detail level for users.
For sure we will need a few patches on top to catch the whole complexity.
Signed-off-by: Heinrich Schuchardt
---
v3:
Call TPL Tertiary Program Loader, VPL Verifying Program Loader
On 8/26/23 11:06, Sughosh Ganu wrote:
Add a document explaining the need for removal of non-compliant
devicetree nodes and properties. Also describe in brief, the macros
that can be used for this removal.
Signed-off-by: Sughosh Ganu
Thanks for properly documenting the change.
Warning, treate
On 8/26/23 11:06, Sughosh Ganu wrote:
Provide a way for removing certain devicetree nodes and/or properties
from the devicetree. This is needed to purge certain nodes and
properties which may be relevant only in U-Boot. Such nodes and
properties are then removed from the devicetree before it is
On 8/26/23 11:06, Sughosh Ganu wrote:
Add a function which is registered to spy for a EVT_FT_FIXUP event,
and removes the non upstreamed nodes and properties from the
devicetree before it gets passed to the OS.
This allows removing entire nodes, or specific properties under nodes
from the dev
On 8/26/23 11:06, Sughosh Ganu wrote:
The bootefi command passes the devicetree to the kernel through the
EFI config table. Call the event handlers for fixing the devicetree
before jumping into the kernel. This removes any devicetree nodes
and/or properties that are specific only to U-Boot, and a
On 8/26/23 11:06, Sughosh Ganu wrote:
Add a function which is registered to spy for a EVT_FT_FIXUP event,
and removes the non upstreamed nodes and properties from the
devicetree before it gets passed to the OS.
This allows removing entire nodes, or specific properties under nodes
from the device
On 8/26/23 14:16, Andrey Skvortsov wrote:
u-boot adds reserve-memory node, if it's missing, with following
properties:
```
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
This defines the size of cells for the children of reserved-memory and
and for the rang
On 8/26/23 12:42, Paul Barker wrote:
On 26/08/2023 10:13, Heinrich Schuchardt wrote:
This is a stub describing how TPL, VPL, and SPL load the next boot stages
on a detail level for users.
For sure we will need a few patches on top to catch the whole complexity.
Signed-off-by: Heinrich
On 8/26/23 15:24, Oleksandr Suvorov wrote:
If CMD_ELF disabled and IMX_BOOTAUX enabled, the u-boot building ends
up with a linking error [1]. Select LIB_ELF for all cases when
valid_elf_image() is used in the imx_bootaux module.
[1]
ld: /tmp/ccaF1rpv.ltrans0.ltrans.o: in function `do_bootaux':
a
On 8/26/23 04:04, Simon Glass wrote:
Hi Heinrich,
On Fri, 25 Aug 2023 at 19:53, Heinrich Schuchardt
wrote:
Do not assume that partitions are numbered continuously starting at 1.
Only a single partition table type can exist on a block device. If we found
a GPT partition table, we must not
Suggested-by: Mattijs Korpershoek
Signed-off-by: Nishanth Menon
Reviewed-by: Heinrich Schuchardt
@baylibre.com/
Reported-by: Simon Glass
Suggested-by: Mattijs Korpershoek
Signed-off-by: Nishanth Menon
Reviewed-by: Heinrich Schuchardt
GPT select CONFIG_PARTITION_UUIDS but we should enable dropping
this requirement.
Signed-off-by: Heinrich Schuchardt
---
cmd/gpt.c | 22 --
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/cmd/gpt.c b/cmd/gpt.c
index 964056bd28..d5d525397f 100644
--- a/cmd/gpt.c
gpt sub-commands setenv and enumerate
* add a parameter check in hash_calculate()
Heinrich Schuchardt (5):
lib: parameter check in hash_calculate
cmd: fix gpt setenv
cmd: fix gpt enumerate
cmd: let
Am 27. August 2023 16:56:51 MESZ schrieb Alper Nebi Yasak
:
>On 2023-08-25 22:28 +03:00, Simon Glass wrote:
>> The efi_gop driver uses private fields from the video uclass to obtain a
>> pointer to the frame buffer. Use the platform data instead.
>>
>> Check the VIDEO_COPY setting to determine
On 26.08.23 04:04, Simon Glass wrote:
On Fri, 25 Aug 2023 at 19:53, Heinrich Schuchardt
wrote:
Do not assume that partitions are continuously numbered starting at 1.
Having a partition table with a single partition 63 is valid.
Signed-off-by: Heinrich Schuchardt
---
cmd/gpt.c | 6
On 28.08.23 11:32, Sughosh Ganu wrote:
On Sat, 26 Aug 2023 at 15:57, Heinrich Schuchardt wrote:
On 8/26/23 11:06, Sughosh Ganu wrote:
The bootefi command passes the devicetree to the kernel through the
EFI config table. Call the event handlers for fixing the devicetree
before jumping into
Document all events and add event.h to the HTML documentation.
Heinrich Schuchardt (2):
dm: event: document all events
doc: add events.h to documentation
doc/api/event.rst | 9 +
doc/api/index.rst | 1 +
include/event.h | 84 +--
3 files
Provide Sphinx documentation for all events.
Signed-off-by: Heinrich Schuchardt
---
include/event.h | 84 +++--
1 file changed, 82 insertions(+), 2 deletions(-)
diff --git a/include/event.h b/include/event.h
index bb38ba98e7..6dee4adef2 100644
--- a
Add the events.h include to the API documentation.
Signed-off-by: Heinrich Schuchardt
---
doc/api/event.rst | 9 +
doc/api/index.rst | 1 +
2 files changed, 10 insertions(+)
create mode 100644 doc/api/event.rst
diff --git a/doc/api/event.rst b/doc/api/event.rst
new file mode 100644
xes: Fixes: 0c1f4a9fb13a ("bootstd: Add a SPI flash bootdev")
Signed-off-by: Heinrich Schuchardt
---
drivers/mtd/spi/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index a9617c6c58..d3b1b21a47 100644
--- a/drivers/mtd/spi/Kconfig
+
Document all events and add event.h to the HTML documentation.
Heinrich Schuchardt (2):
dm: event: document all events
doc: add events.h to documentation
doc/api/event.rst | 9 +
doc/api/index.rst | 1 +
include/event.h | 97 ---
3 files
Add the events.h include to the API documentation.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass
---
v2:
no change
---
doc/api/event.rst | 9 +
doc/api/index.rst | 1 +
2 files changed, 10 insertions(+)
create mode 100644 doc/api/event.rst
diff --git a/doc/api
Provide Sphinx documentation for all events.
Signed-off-by: Heinrich Schuchardt
---
v2:
remove non-printing comments from num event_t
correct texts according to Simon's suggestions
---
include/event.h | 97 ++---
1 file change
On 8/28/23 21:29, Joshua Watt wrote:
On Fri, Aug 25, 2023 at 7:57 PM Heinrich Schuchardt wrote:
On 8/25/23 21:38, Joshua Watt wrote:
Adds initial documentation for the gpt command
Thanks a lot for filling the gap.
Signed-off-by: Joshua Watt
---
doc/usage/cmd/gpt.rst | 141
%s/there/their/
Signed-off-by: Heinrich Schuchardt
---
include/video.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/video.h b/include/video.h
index 269915160b..16f7a83f8d 100644
--- a/include/video.h
+++ b/include/video.h
@@ -260,7 +260,7 @@ int video_fill_part
On 8/28/23 22:24, Alexander Graf wrote:
On 28.08.23 19:54, Simon Glass wrote:
Hi Alex,
On Wed, 23 Aug 2023 at 02:56, Alexander Graf wrote:
Hey Simon,
On 22.08.23 20:56, Simon Glass wrote:
Hi Alex,
On Tue, 22 Aug 2023 at 01:47, Alexander Graf wrote:
On 22.08.23 01:03, Simon Glass wrote:
On 8/28/23 23:56, Joshua Watt wrote:
This help text appears to be a fragment of the text shown when
CONFIG_CMD_GPT_RENAME is enabled, but is confusing so remove it.
Signed-off-by: Joshua Watt
Reviewed-by: Heinrich Schuchardt
---
cmd/gpt.c | 2 --
1 file changed, 2 deletions(-)
diff
/On 8/28/23 23:56, Joshua Watt wrote:
Adds initial documentation for the gpt command
Signed-off-by: Joshua Watt
---
doc/usage/cmd/gpt.rst | 184 ++
doc/usage/index.rst | 1 +
2 files changed, 185 insertions(+)
create mode 100644 doc/usage/cmd/gp
On 8/28/23 23:56, Joshua Watt wrote:
Adds a command that can be used to modify the GPT partition table to
indicate which partitions should have the bootable flag set
Signed-off-by: Joshua Watt
---
cmd/gpt.c | 80 +++
doc/usage/cmd/gpt.rst
On 8/29/23 00:45, Heinrich Schuchardt wrote:
/On 8/28/23 23:56, Joshua Watt wrote:
Adds initial documentation for the gpt command
Signed-off-by: Joshua Watt
---
doc/usage/cmd/gpt.rst | 184 ++
doc/usage/index.rst | 1 +
2 files changed, 185
In the 'Build with GCC' chapter mention Kconfig fragments and show how they
are applied.
Adjust the formatting in the configuration section to consistently use
italics for file names.
Signed-off-by: Heinrich Schuchardt
---
doc/build/gcc.rst | 35 ++---
On 8/29/23 00:01, Marcel Ziswiler wrote:
From: Marcel Ziswiler
Now with the update U-Boot wrappers having been sorted out, document
their usage.
Signed-off-by: Marcel Ziswiler
---
doc/board/toradex/verdin-am62.rst | 14 ++
1 file changed, 14 insertions(+)
diff --git a/doc/bo
On 8/29/23 00:01, Marcel Ziswiler wrote:
From: Marcel Ziswiler
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor
Am 31. August 2023 01:28:37 MESZ schrieb Simon Glass :
>Universal Payload (UPL) is an upcoming Industry Standard for firmware
>components. UPL is designed to improve interoperability within the
>firmware industry, allowing mixing and matching of projects with less
>friction and fewer project-spe
Am 31. August 2023 01:29:23 MESZ schrieb Simon Glass :
>Add some placeholder documentation to explain the basic concept. Once the
>spec is published, more can be added and this series applied.
>
>Signed-off-by: Simon Glass
>---
>
> doc/usage/index.rst | 1 +
> doc/usage/upl.rst | 27 +
Am 31. August 2023 05:52:57 MESZ schrieb Simon Glass :
>These appear prominently in the main menu at present. However they are
>selected when needed so do not need to be visible.
>
>Make them hidden.
>
>Signed-off-by: Simon Glass
>---
>
>(no changes since v1)
>
> common/Kconfig | 4 ++--
> 1 fil
On 9/1/23 03:13, Simon Glass wrote:
The lmb data structures use the word 'region' to describe the region in
which the allocations happen, as well as the individual allocations in
that region. The interior structure is called lmb_property but is
described as a region.
This is quite confusing. One
On 9/1/23 03:13, Simon Glass wrote:
When lmb runs out of space in its internal tables, it gives errors on
every fs load operation. This is horribly confusing, as the poor user
tries different memory regions one at a time.
Use the updated API to check the error code and print a helpful message.
A
f the size of the partition table descriptor.
Use accessor for type_guid field.
*** BLURB HERE ***
Heinrich Schuchardt (4):
part: rename disk_partition_type_uuid()
cmd: gpt: use UUID accessor more consistently
cmd: gpt: fix calc_parts_list_len()
cmd: gpt: fix gpt read
cmd/gpt.c
Rename disk_partition_type_uuid to disk_partition_type_guid.
Provide function descriptions for the getter and setter.
Fixes: bcd645428c34 ("part: Add accessors for struct disk_partition type_uuid")
Signed-off-by: Heinrich Schuchardt
---
v2:
new patch
---
disk/part_
the setter.
print_gpt_info() and create_gpt_partitions_list() are further functions
where we should use the getter.
Fixes: c5f1d005f517 ("part: Add accessors for struct disk_partition uuid")
Signed-off-by: Heinrich Schuchardt
---
v2:
new patch
---
cmd/gpt.c | 23 ---
To partition a block device the partition type GUIDs are needed but
'gpt read' does not provide these. Add the missing parts.
Signed-off-by: Heinrich Schuchardt
---
v2:
use accessor for type_guid field
---
cmd/gpt.c | 16 +++-
1 file changed, 15 insertions(+),
'MiB' postfix but a '0x' prefix.
* The uuid field is only needed if configured.
Fixes: 2fcaa413b3f6 ("gpt: harden set_gpt_info() against non NULL-terminated
strings")
Signed-off-by: Heinrich Schuchardt
---
v2:
new patch
---
cmd/gpt.c | 33 ++
Dear Tom,
The following changes since commit b8b512a45358d50bce2e17b5941c5e39b52a0594:
Merge branch '2023-08-31-replace-more-init-hooks-with-events' into
next (2023-08-31 15:10:42 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/do
pt command
* Add events to HTML documentation
* Update Toradex documentation
----
Heinrich Schuchardt (3):
dm: event: document all events
doc: add events.h to documentation
video: fix typo in video_sync_all documentation
J
On 9/4/23 11:30, Chanho Park wrote:
Hi,
-Original Message-
From: U-Boot On Behalf Of Heinrich
Schuchardt
Sent: Saturday, August 19, 2023 10:13 PM
To: Rick Chen ; Leo
Cc: Bin Meng ; Anup Patel ;
u-boot@lists.denx.de; Heinrich Schuchardt
Subject: [PATCH 2/2] risc-v: implement DBCN
Currently we only offer an SBI based debug UART for SBI v0.1.
With OpenSBI 1.3 the Debug Console Extension (DBCN) has become available.
This allows us to implement a debug UART in a device independent manor.
v2:
In the driver check that we are in S-mode.
Heinrich Schuchardt (2):
risc-v
The DBCN extension provides a Console Write Byte call.
Implement function sbi_dbcn_write_byte to invoke it.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Leo Yu-Chi Liang
---
v2:
no change
---
arch/riscv/include/asm/sbi.h | 1 +
arch/riscv/lib/sbi.c | 16
2
Use the DBCN SBI extension to implement a debug console.
Make it the default for S-mode RISC-V.
Signed-off-by: Heinrich Schuchardt
---
v2:
check that we are in S-mode
---
drivers/serial/Kconfig | 5 -
drivers/serial/serial_sbi.c | 20
2 files changed, 24
On 9/4/23 18:48, Simon Glass wrote:
Hi Heinrich,
On Sat, 2 Sept 2023 at 01:34, Heinrich Schuchardt
wrote:
Rename disk_partition_type_uuid to disk_partition_type_guid.
Provide function descriptions for the getter and setter.
Fixes: bcd645428c34 ("part: Add accessors for s
On 9/4/23 18:48, Simon Glass wrote:
Hi Heinrich,
On Sat, 2 Sept 2023 at 01:34, Heinrich Schuchardt
wrote:
* Avoid incrementing by moving comma into strlen("uuid_disk=,") and
considering NUL byte.
* Appending a UUID only adds UUID_STR_LEN bytes.
Don't count the termina
On 8/22/23 16:33, Shengyu Qu wrote:
Since PLDA PCIE driver is added and VL805 support is enabled in
defconfig for Starfive Visionfive 2, modify the document to keep
consistent.
Signed-off-by: Shengyu Qu
---
doc/board/starfive/visionfive2.rst | 2 ++
1 file changed, 2 insertions(+)
diff --gi
macro "EVENT_SPY_SIMPLE".
Is there anything that should be added?
Or did I miss anything?
This patch is only applicable to origin/next. The definition there is in
include/event.h:311.
Reviewed-by: Heinrich Schuchardt
prefixed
U-Boot SPL file u-boot-spl.bin.normal.out.
Heinrich Schuchardt (2):
tools: mkimage: Add StarFive SPL image support
riscv: dts: starfive: generate u-boot-spl.bin.normal.out
.../jh7110-starfive-visionfive-2-u-boot.dtsi | 10 +
boot/image.c | 1 +
The StarFive JH7110 base boards require a header to be prefixed to the SPL
binary image. This has previously done with a vendor tool 'spl_tool'
published under a GPL-2-or-later license. Integrate this capability into
mkimage.
Signed-off-by: Heinrich Schuchardt
---
boot/image.
normal.out.
Update the documentation.
Signed-off-by: Heinrich Schuchardt
---
.../dts/jh7110-starfive-visionfive-2-u-boot.dtsi | 10 ++
doc/board/starfive/visionfive2.rst | 14 ++
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/dts/jh711
On 06.09.23 12:47, Chanho Park wrote:
Hi,
-Original Message-
From: Heinrich Schuchardt
Sent: Wednesday, September 6, 2023 7:08 PM
To: Rick Chen ; Leo ; Yanhong
Wang
Cc: Simon Glass ; Marc Kleine-Budde
;
Chanho Park ; u-boot@lists.denx.de; Heinrich
Schuchardt
Subject: [PATCH 1/2
prefixed
U-Boot SPL file u-boot-spl.bin.normal.out.
v2:
Fix a typo in a comment in tools/sfspl.c
Add Tested-by credits
Heinrich Schuchardt (2):
tools: mkimage: Add StarFive SPL image support
riscv: dts: starfive: generate u-boot-spl.bin.normal.out
.../jh7110-starfive-visi
The StarFive JH7110 base boards require a header to be prefixed to the SPL
binary image. This has previously done with a vendor tool 'spl_tool'
published under a GPL-2-or-later license. Integrate this capability into
mkimage.
Signed-off-by: Heinrich Schuchardt
Tested-by: Chanho Pa
normal.out.
Update the documentation.
Signed-off-by: Heinrich Schuchardt
Tested-by: Chanho Park
---
v2:
Fix a typo in a comment in tools/sfspl.c
Add Tested-by credit
---
.../dts/jh7110-starfive-visionfive-2-u-boot.dtsi | 10 ++
doc/board/starfive/visionfive2.rst
On 03.08.23 10:36, Xavier Drudis Ferran wrote:
El Mon, Jul 31, 2023 at 06:43:01PM -0400, Sean Anderson deia:
This converts the semihosting load method to use spl_load. As a result, it
also adds support for LOAD_FIT_FULL and IMX images.
Signed-off-by: Sean Anderson
---
Changes in v5:
- Rework
spl_blk_load_image() should not return an uninitialized value if
blk_get_devnum_by_uclass_id() fails.
Fixes: 8ce6a2e17577 ("spl: blk: Support loading images from fs")
Reported-by: Xavier Drudis Ferran
Signed-off-by: Heinrich Schuchardt
---
common/spl/spl_blk_fs.c | 2 +-
1 file
On 06.09.23 07:18, Chanho Park wrote:
timer_get_boot_us function is required to record the boot stages as
us-based timestamp.
To get a micro-second time from a timer tick, this converts the
formula like below to avoid zero result of (tick / rate) part.
From: time(us) = (tick / rate) * 1000
On 9/7/23 00:04, Tom Rini wrote:
On Wed, Sep 06, 2023 at 09:21:39AM -0500, Rob Herring wrote:
On Mon, Aug 28, 2023 at 04:09:29PM -0600, Simon Glass wrote:
Hi Peter,
On Mon, 28 Aug 2023 at 14:29, Peter Robinson wrote:
On Mon, Aug 28, 2023 at 6:54 PM Simon Glass wrote:
Hi Peter,
On Mon, 2
To avoid confusion document that timer_dev_priv.clock_rate and
timer_get_rate() yield the timer rate in hertz.
Signed-off-by: Heinrich Schuchardt
---
include/timer.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/timer.h b/include/timer.h
index 311ce6b2c3
: Heinrich Schuchardt
---
arch/riscv/Kconfig| 1 +
.../visionfive2/starfive_visionfive2.c| 43 ++-
2 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 6771d8d919..1c62c2345b 100644
--- a/arch
d NVME/USB stuff
for Starfive Visionfive 2
https://lore.kernel.org/u-boot/ty3p286mb2611c9ad6e5bb3756a959e8998...@ty3p286mb2611.jpnp286.prod.outlook.com/
Signed-off-by: Heinrich Schuchardt
---
include/configs/starfive-visionfive2.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/inclu
The test_event_base and test_event_probe unit tests use function
event_register() which depends on CONFIG_EVENT_DYNAMIC=y.
Fixes: 7d02645fe4c0 ("event: Add a simple test")
Signed-off-by: Heinrich Schuchardt
---
test/common/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletio
On 9/7/23 18:21, Gatien Chevallier wrote:
Rename the RNG driver as it is usable by other STM32 platforms
than the STM32MP1x ones. Rename CONFIG_RNG_STM32MP1 to
CONFIG_RNG_STM32
Signed-off-by: Gatien Chevallier
LGTM
Reviewed-by: Heinrich Schuchardt
On 9/7/23 18:21, Gatien Chevallier wrote:
Default embed this configuration. If OP-TEE PTA RNG is present as well,
the priority will be given to it instead of the U-Boot driver.
Are you relying here on drivers being probed in alphabetical sequence?
Best regards
Heinrich
Signed-off-by: Gatie
On 9/7/23 18:21, Gatien Chevallier wrote:
RNG clock error detection is now enabled if the "clock-error-detect"
property is set in the device tree.
Signed-off-by: Gatien Chevallier
---
drivers/rng/stm32_rng.c | 22 +-
1 file changed, 17 insertions(+), 5 deletions(-)
diff
On 6/16/23 10:42, Ilias Apalodimas wrote:
We don't have a documentation page for our TPM subsystem. I plan
on sending one in the future, but in the meantime document the
new 'tpm autostart' command in the QEMU instructions while using
a SWTPM
Signed-off-by: Ilias Apalodimas
Reviewed-by: Si
On 9/7/23 22:50, Joao Marcos Costa wrote:
Previously, the file extension was .txt, and it referenced the uImage.FIT
directory, which no longer exists. This commit updates the path accordingly.
Signed-off-by: Joao Marcos Costa
---
doc/usage/fit/howto.rst | 2 +-
1 file changed, 1 insertion(+)
on 'tpm init'
Fixes: commit e663b2ff4ba2("tpm: Add 'tpm autostart' shell command")
Signed-off-by: Ilias Apalodimas
Reviewed-by: Heinrich Schuchardt
---
cmd/tpm-v1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/tpm-v1.c b/cmd/tpm-v1.c
ind
n value in spl_blk_load_image
----
Heinrich Schuchardt (2):
spl: undefined return value in spl_blk_load_image
timer: document the unit of the timer rate
Ilias Apalodimas (2):
tpm: Fix autostart for TPM1.2 devices
Massimo Pegorer
Reviewed-by: Heinrich Schuchardt
Am 12. September 2023 14:50:35 MESZ schrieb Marcel Ziswiler
:
>On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
>> TI K3 J784S4 and AM69 SK are new additions to the K3 SoC family.
>> Add documentation about the J784S4 EVM and AM69 SK.
>>
>> Signed-off-by: Dasnavis Sabiya
>> Signed-off-
Am 13. September 2023 04:23:14 MESZ schrieb "Wu, Fei" :
>On 9/5/2023 6:09 PM, Fei Wu wrote:
>> In order to enable PCIe passthrough on qemu riscv, the physical memory
>> range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram,
>> two ranges are created as [2G, 3G) and [4G, 7G), curr
Am 14. September 2023 07:30:55 MESZ schrieb Fei Wu :
>In order to enable PCIe passthrough on qemu riscv, the physical memory
>range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram,
>two ranges are created as [2G, 3G) and [4G, 7G), currently u-boot sets
>ram_top to 4G - 1 if the g
On 9/14/23 08:48, Wu, Fei wrote:
On 9/14/2023 2:05 PM, Heinrich Schuchardt wrote:
Am 14. September 2023 07:30:55 MESZ schrieb Fei Wu :
In order to enable PCIe passthrough on qemu riscv, the physical memory
range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram,
two ranges are
On 9/2/23 16:53, Joao Marcos Costa wrote:
Add 'Integration with IDEs' section.
For now, this section is mostly a reference to the documentation of
gen_compile_commands, also in doc/build, but it can be futurely used as
a guide for other IDE-friendly features.
Signed-off-by: Joao Marcos Costa
-
On 9/2/23 16:53, Joao Marcos Costa wrote:
This documentation briefly explains what is a compilation database,
and how to use the script to generate one.
This is not a portage, as there was no original documentation in the
Linux sources.
Acknowledge the documentation in the script's header and i
On 9/14/23 09:42, Wu, Fei wrote:
On 9/14/2023 3:20 PM, Heinrich Schuchardt wrote:
On 9/14/23 08:48, Wu, Fei wrote:
On 9/14/2023 2:05 PM, Heinrich Schuchardt wrote:
Am 14. September 2023 07:30:55 MESZ schrieb Fei Wu :
In order to enable PCIe passthrough on qemu riscv, the physical memory
On 9/14/23 12:21, Heinrich Schuchardt wrote:
On 9/14/23 09:42, Wu, Fei wrote:
On 9/14/2023 3:20 PM, Heinrich Schuchardt wrote:
With which version of QEMU were you able to use PCI pass through?
Please try this:
base: ccb86f079a9e
patch:
https://lore.kernel.org/all
On 14.09.23 12:08, Mayuresh Chitale wrote:
This series adds support to locate an EFI System Partition on a disk and
boot the next stage from such a parition if found. The next stage image
is expected to be under the FIRMWARE directory as described in the EBBR
specification [1]. Also update the sp
On 01.09.23 12:25, Masahisa Kojima wrote:
This supports to boot from the URI device path.
When user selects the URI device path, bootmgr downloads
the file using wget into the address specified by loadaddr
env variable.
If the file is .iso or .img file, mount the image with blkmap
then try to boo
Am 15. September 2023 02:22:29 MESZ schrieb Simon Glass :
>Update qconfig's documentation to better reflect its new purpose in life.
>
>Signed-off-by: Simon Glass
>---
>
>Changes in v2:
>- Reinstate the -C option
>
> doc/develop/index.rst | 2 +-
> doc/develop/{moveconfig
On 9/17/23 00:19, Jonas Karlman wrote:
On 2023-09-06 14:00, Heinrich Schuchardt wrote:
The StarFive VisionFive 2 board cannot load spl/u-boot-spl.bin but needs a
prefixed header. We have referring to a vendor tool (spl_tool) for this
task. 'mkimage -T sfspl' can generate the pre
s:
* test: fix build dependency for event unit tests
----
Heinrich Schuchardt (1):
test: build dependency for event unit tests
Jaewon Jung (1):
doc: delete unused values kernel command line
Massimo Pegorer (2):
prefixed
U-Boot SPL file u-boot-spl.bin.normal.out.
v3:
Rename binman node for SPL image.
Use u-boot-spl instead of blob as mkimage subnode.
v2:
Fix a typo in a comment in tools/sfspl.c
Add Tested-by credits
Heinrich Schuchardt (2):
tools: mkimage: Add StarFive
The StarFive JH7110 base boards require a header to be prefixed to the SPL
binary image. This has previously done with a vendor tool 'spl_tool'
published under a GPL-2-or-later license. Integrate this capability into
mkimage.
Signed-off-by: Heinrich Schuchardt
Tested-by: Chanho Park
normal.out.
Update the documentation.
Signed-off-by: Heinrich Schuchardt
---
v3:
Rename binman node for SPL image.
Use u-boot-spl instead of blob as mkimage subnode.
v2:
Fix a typo in a comment in tools/sfspl.c
Add Tested-by credits
---
.../dts/jh7110-starfive-visi
Calling ExitBootServices() after executing 'connect -r' in the EFI
shell has previously caused errors.
Provide an EFI binary ebstest.efi that calls ExitBootServices() for
testing.
Signed-off-by: Heinrich Schuchardt
---
I just need the binary currently for testing.
Probably we
On 9/7/22 23:10, Simon Glass wrote:
Hi Etienne,
On Wed, 7 Sept 2022 at 02:20, Etienne Carriere
wrote:
Changes efi_delete_handle() to not free EFI handles that are not related
to EFI objects.
This change tries to resolved an issue seen since U-Boot v2022.07
in which EFI ExitBootService attem
On 9/7/22 10:20, Etienne Carriere wrote:
Changes efi_delete_handle() to not free EFI handles that are not related
to EFI objects.
This change tries to resolved an issue seen since U-Boot v2022.07
in which EFI ExitBootService attempts to release some EFI handles twice.
The issue was seen bootin
eviewed-by: Heinrich Schuchardt
---
v2:
add log message
remove superfluous NULL test
tweak commit message
---
lib/efi_loader/efi_boottime.c | 9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_bootti
301 - 400 of 10878 matches
Mail list logo
