On 8/29/23 00:01, Marcel Ziswiler wrote:
From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Now with the update U-Boot wrappers having been sorted out, document
their usage.
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
doc/board/toradex/verdin-am62.rst | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/doc/board/toradex/verdin-am62.rst
b/doc/board/toradex/verdin-am62.rst
index ecc7e0777cb..e8d90273288 100644
--- a/doc/board/toradex/verdin-am62.rst
+++ b/doc/board/toradex/verdin-am62.rst
@@ -74,6 +74,20 @@ Flash to eMMC
=> fatload mmc 1 ${loadaddr} u-boot.img
=> mmc write ${loadaddr} 0x1400 0x2000
+As a convenience, instead of having to remember all those addresses and sizes,
+one may also use the update U-Boot wrappers:
+
+.. code-block:: bash
+
+ > tftpboot ${loadaddr} tiboot3-am62x-gp-verdin.bin
+ > run update_tiboot3
I wonder what the prompt '>' refers to. The rest of the document uses
'=>' as U-Boot prompt.
To make copying easier consider using
.. prompt:: bash =>
The html rendered page will contain a => before each line but you would
not need to type it here.
Best regards
Heinrich
+
+ > tftpboot ${loadaddr} tispl.bin
+ > run update_tispl
+
+ > tftpboot ${loadaddr} u-boot.img
+ > run update_uboot
+
Boot
----
