On 3/5/24 08:54, Conor Dooley wrote:
On Tue, Mar 05, 2024 at 08:34:20AM +0100, Heinrich Schuchardt wrote:
On 3/5/24 00:28, Conor Dooley wrote:
From: Conor Dooley
According to
https://github.com/riscv/riscv-isa-manual/blob/main/src/naming.adoc the
ISA string is case insensitive. Why can we ass
[+ linux-mtd ]
Hi Marek,
On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut wrote:
> Some Winbond SPI NORs have special SR3 register which is
> used among other things to control whether non-standard
> "Individual Block/Sector Write Protection" (WPS bit)
> locking scheme is activated. This non-standa
On Sat, 2 Mar 2024 at 13:20, Peter Robinson wrote:
>
> The EFI spec states that the ESP can be any of FAT12/16/32 but for
> compatibility doesn't necssarily require the partition to be the
> EFI partition table ID of 0xef. A number of arm devices will not
> find their firmware on a FAT partition w
On 29/02/24 3:43 pm, Roger Quadros wrote:
>
>
> On 28/02/2024 14:06, MD Danish Anwar wrote:
>> Add APIs to set a firmware_name to a rproc and boot the rproc with the
>> same firmware.
>>
>> Clients can call rproc_set_firmware() API to set firmware_name for a rproc
>> whereas rproc_boot() will loa
Hi Niek,
Those patches apply cleanly, I do have some comments on the code.
I will try to answer on the public thread here instead of github, but
for the next version try to send it with git send-email. It makes the
whole review/test/apply process easier for me
Thanks
/Ilias
On Thu, 22 Feb 2024
Hi,
On 2024-03-05 06:40, Eugen Hristev wrote:
> On 3/5/24 04:10, Trevor Woerner wrote:
>> Following the pattern of other Rockchip devices, enable the U-Boot
>> environment to be stored in MMC. This patch specifically assumes the
>> environment will be stored on the SDcard.
>>
>> Signed-off-by: Tre
Hi Trevor,
On 2024-03-05 03:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot
> environment to be stored in MMC. This patch specifically assumes the
> environment will be stored on the SDcard.
This board has SPI flash, so storing env in SPI flash is pr
Hi Jonas & Trevor,
On Tue, 2024-03-05 at 10:31 +0100, Jonas Karlman wrote:
> Hi Trevor,
>
> On 2024-03-05 03:10, Trevor Woerner wrote:
> > Following the pattern of other Rockchip devices, enable the U-Boot
> > environment to be stored in MMC. This patch specifically assumes the
> > environment wi
Hi Trevor,
On 2024-03-05 03:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot environment
> to be stored in MMC. This patch specifically assumes the environment will be
> stored on the SDcard.
This board support optional emmc (sd nand), forcing env to
Hi Trevor,
On 2024-03-05 03:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot
> environment to be stored in MMC. This patch specifically assumes the
> environment will be stored on the SDcard.
This board has SPI flash, so storing env in SPI flash is pr
Hi Christopher,
On 2024-03-05 10:36, Christopher Obbard wrote:
> Hi Jonas & Trevor,
>
> On Tue, 2024-03-05 at 10:31 +0100, Jonas Karlman wrote:
>> Hi Trevor,
>>
>> On 2024-03-05 03:10, Trevor Woerner wrote:
>>> Following the pattern of other Rockchip devices, enable the U-Boot
>>> environment to
Hi all,
On 3/5/24 10:36, Christopher Obbard wrote:
[You don't often get email from chris.obb...@collabora.com. Learn why this is
important at https://aka.ms/LearnAboutSenderIdentification ]
Hi Jonas & Trevor,
On Tue, 2024-03-05 at 10:31 +0100, Jonas Karlman wrote:
Hi Trevor,
On 2024-03-05 0
Hi Marek,
On 3/4/24 15:48, Marek Behún wrote:
Hi Stefan,
On Wed, 14 Feb 2024 08:50:16 +0100
Stefan Roese wrote:
Hi Ramon,
On 1/9/24 10:37, Stefan Roese wrote:
On 12/18/23 17:09, Marek Behún wrote:
On Wed, 6 Dec 2023 15:35:56 +0100
Marek Mojík wrote:
The mv88e6xxx driver does not curr
Hi,
On 22/02/24 18:38, Devarsh Thakkar wrote:
> Update simple-framebuffer device-tree node by enumerating framebuffer
> related information in existing simple-framebuffer node in Linux
> device-tree file and enabling it.
>
> In case there is no simple-framebuffer stub detected in Linux kernel
> d
On 12/6/23 15:35, Marek Mojík wrote:
The mv88e6xxx driver does not currently initialize the smi_addr field, but
instead keeps the default zero value. This leads to driver being unusable
on devices where the switch is not on address zero of the mdio bus. Fix
this problem by reading the SMI address
On 12/19/23 10:55, Marek Behún wrote:
From: Marek Mojík
The Turris Omnia contains the Marvell 88E6176 ethernet switch. Add
config options and device tree to enable the support.
Signed-off-by: Marek Mojík
Signed-off-by: Marek Behún
Applied to u-boot-marvell/master
Thanks,
Stefan
---
Stef
On 2/2/24 16:13, Josua Mayer wrote:
SolidRun Armada-388 SoM has an i2c bus supporting on-som eeprom, and
peripherals on a carrier.
armada-38x.dtsi disables this bus by default, it should be enabled by
som or carrier dts.
Linux has moved i2c0 from helios-4 board dts to som dtsi, including
status,
On 2/2/24 16:13, Josua Mayer wrote:
Update the helios4 defconfig to enable the 'setexpr' command, which is a
default and useful for various complex boot-scripts.
Signed-off-by: Josua Mayer
Applied to u-boot-marvell/master
Thanks,
Stefan
---
configs/helios4_defconfig | 1 -
1 file change
On 2/2/24 16:13, Josua Mayer wrote:
Add a config fragment with required differences for booting from spi
flash instead of sd-card (default).
Settings for environment location are based on vendor u-boot:
https://github.com/kobol-io/u-boot/blob/helios4/include/configs/helios4.h#L59
The fragment c
On 2/15/24 17:57, Max Resch wrote:
A RNG driver for Armada 3720 boards running the Turris Mox rWTM firmware
from CZ.NIC in the secure processor.
Signed-off-by: Max Resch
Applied to u-boot-marvell/master
Thanks,
Stefan
---
Changes in v5:
- check return code turris_rwtm_rng_fill_entropy
Hi Tom,
please pull this next batch of mostly Marvell related patches:
- net: mv88e6xxx: fix missing SMI address initialization (Marek)
- mvebu: turris_omnia: Enable networking via ethernet switch (Marek)
- mvebu: helios-4: add con
On Tue, 20 Feb 2024 at 07:59, niek.nooij...@omron.com
wrote:
>
> Hi there
>
> After the NV-memory read/write code I'm here again for another patch.
> This time I implemented code to allow an NV-index to be locked behind a PCR
> value.
> This can be used together with the new measured-boot code al
USB4 has been added to the boot targets and
also add support to enable JTAG.
Signed-off-by: Shubhangi Shrikrushna Mahalle
Signed-off-by: Venkatesh Yadav Abbarapu
---
board/xilinx/zynqmp/zynqmp_kria.env | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/zy
Hi Tom,
please pull the sunxi/master branch, containing some fixes and smaller
changes for 2024.04.
One fix makes the reboot more robust on some older board, another one
stabilises the initial clock setup on the A10/A20.
Two patches make sure our DRAM init does not actually change the content
of t
On 3/5/24 9:55 AM, Michael Walle wrote:
[+ linux-mtd ]
Hi Marek,
Hi,
On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut wrote:
Some Winbond SPI NORs have special SR3 register which is
used among other things to control whether non-standard
"Individual Block/Sector Write Protection" (WPS bit)
lo
On 3/3/24 22:58, Angelo Dureghello wrote:
Hi Tom,
On Tue, Feb 20, 2024 at 01:11:38PM +0530, Love Kumar wrote:
Add a test for reset commands which performs resetting of CPU, It does COLD
reset by default and WARM reset with -w option. Signed-off-by: Love Kumar
Reviewed-by: Tom Rini --- Cha
Hi Caleb,
On Mon, 4 Mar 2024 at 22:22, Caleb Connolly wrote:
>
> This adjusts OF_UPSTREAM to behave more like the kernel by allowing for
> all the devicetree files for a given vendor to be compiled. This is
> useful for Qualcomm in particular as most boards are supported by a
> single U-Boot buil
Hi Caleb,
On Mon, 4 Mar 2024 at 22:21, Caleb Connolly wrote:
>
> Many of the dt-binding headers in U-Boot are based on the upstream ones
> from Linux, occasionally with minor changes. Although some have
> additional things defined or are totally different.
>
> This series attempts to drop as many
On Tue, Mar 05, 2024 at 06:05:52PM +0530, Sumit Garg wrote:
> Hi Caleb,
>
> On Mon, 4 Mar 2024 at 22:22, Caleb Connolly wrote:
> >
> > This adjusts OF_UPSTREAM to behave more like the kernel by allowing for
> > all the devicetree files for a given vendor to be compiled. This is
> > useful for Qua
Hi Marek,
On Tue Mar 5, 2024 at 1:31 PM CET, Marek Vasut wrote:
> On 3/5/24 9:55 AM, Michael Walle wrote:
> > On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut wrote:
> >> Some Winbond SPI NORs have special SR3 register which is
> >> used among other things to control whether non-standard
> >> "Indiv
On 05/03/2024 12:35, Sumit Garg wrote:
> Hi Caleb,
>
> On Mon, 4 Mar 2024 at 22:22, Caleb Connolly wrote:
>>
>> This adjusts OF_UPSTREAM to behave more like the kernel by allowing for
>> all the devicetree files for a given vendor to be compiled. This is
>> useful for Qualcomm in particular as
On Tue, 5 Mar 2024 at 18:21, Caleb Connolly wrote:
>
>
>
> On 05/03/2024 12:35, Sumit Garg wrote:
> > Hi Caleb,
> >
> > On Mon, 4 Mar 2024 at 22:22, Caleb Connolly
> > wrote:
> >>
> >> This adjusts OF_UPSTREAM to behave more like the kernel by allowing for
> >> all the devicetree files for a giv
On Mon, 19 Feb 2024 16:32:01 +, Michał Barnaś wrote:
> Fix the driver to behave like the chip datasheet requires.
> Improve wake up function to send low signal on SDA line for at least
> 60us as chip requires to wake up. Fix sleep function to move the chip
> into sleep mode, not into idle mode
_defconfig | 2 +-
net/mdio-uclass.c| 41 ++
24 files changed, 825 insertions(+), 130 deletions(-)
---
base-commit: 84f5bb0be0ec9fbf98f8f3317b578dfc114cf44e
change-id: 20240305-for-2024-07-beagleplay-eth-f82a51197937
Best regards,
--
Roger Quadros
If DM_ETH_PHY is enabled then try to bind and probe the
generic Ethernet PHY driver for each child of MDIO bus.
This is to ensure that GPIO reset handling is done if available
before MDIO bus driver scans for the PHYs.
Signed-off-by: Roger Quadros
---
net/mdio-uclass.c | 41
Reset GPIO handling is done in ETH PHY Class driver.
Enable DM_ETH_PHY.
We don't use Fixed PHY so disable PHY_FIXED.
Signed-off-by: Roger Quadros
---
configs/am62x_beagleplay_a53_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/am62x_beagleplay_a53_defconfig
Update k3-am62 DT files from linux-next-20240229.
Signed-off-by: Roger Quadros
---
arch/arm/dts/k3-am62-main.dtsi | 126 ++---
arch/arm/dts/k3-am62-mcu.dtsi | 4 +-
arch/arm/dts/k3-am62-phycore-som.dtsi | 5 +-
arch/arm/dts/k3-am62-thermal.dtsi
Add missing bits to get CPSW Ethernet working.
Signed-off-by: Roger Quadros
---
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 63
1 file changed, 63 insertions(+)
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
b/arch/arm/dts/k3-am625-beagleplay-u-boot.d
Move GPIO pinmux to MDIO node. Add GB Ethernet reset GPIO.
Add PIN_INPUT to Fix SPE ethernet reset gpio so that
reading the GPIO can give correct status.
Signed-off-by: Roger Quadros
---
arch/arm/dts/k3-am625-beagleplay.dts | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --g
On Tue, Mar 05, 2024 at 11:15:41AM +, Andre Przywara wrote:
> Hi Tom,
>
> please pull the sunxi/master branch, containing some fixes and smaller
> changes for 2024.04.
> One fix makes the reboot more robust on some older board, another one
> stabilises the initial clock setup on the A10/A20.
On Tue, Mar 05, 2024 at 11:35:30AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull this next batch of mostly Marvell related patches:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Mar 05, 2024 at 02:39:14PM +0530, MD Danish Anwar wrote:
> On 29/02/24 3:43 pm, Roger Quadros wrote:
> >
> >
> > On 28/02/2024 14:06, MD Danish Anwar wrote:
> >> Add APIs to set a firmware_name to a rproc and boot the rproc with the
> >> same firmware.
> >>
> >> Clients can call rproc_set
Hello all,
On 2024-03-05 10:36, Christopher Obbard wrote:
On Tue, 2024-03-05 at 10:31 +0100, Jonas Karlman wrote:
On 2024-03-05 03:10, Trevor Woerner wrote:
> Following the pattern of other Rockchip devices, enable the U-Boot
> environment to be stored in MMC. This patch specifically assumes th
On Tue 2024-03-05 @ 10:17:10 AM, Jonas Karlman wrote:
> Hi,
>
> On 2024-03-05 06:40, Eugen Hristev wrote:
> > On 3/5/24 04:10, Trevor Woerner wrote:
> >> Following the pattern of other Rockchip devices, enable the U-Boot
> >> environment to be stored in MMC. This patch specifically assumes the
> >
On Mon, 19 Feb 2024 at 14:11, Sumit Garg wrote:
>
> QCS404 supports Synopsys Designware Ethernet QOS IP and we already have
> the corresponding glue layer present upstream as:
> drivers/net/dwc_eth_qos_qcom.c. So enable corresponding support.
>
> Along with that it is possible for Qualcomm platfor
Hi Adam,
On Wed, 28 Feb 2024 at 12:29, Sumit Garg wrote:
>
> Hi Adam,
>
> On Wed, 28 Feb 2024 at 04:42, Adam Ford wrote:
> >
> > On Mon, Feb 26, 2024 at 2:05 AM Sumit Garg wrote:
> > >
> > > Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe
> > > PHY initialization moved to
On Tue, Mar 5, 2024 at 7:48 AM Sumit Garg wrote:
>
> Hi Adam,
>
> On Wed, 28 Feb 2024 at 12:29, Sumit Garg wrote:
> >
> > Hi Adam,
> >
> > On Wed, 28 Feb 2024 at 04:42, Adam Ford wrote:
> > >
> > > On Mon, Feb 26, 2024 at 2:05 AM Sumit Garg wrote:
> > > >
> > > > Add initial support for i.MX8M{
[trimmed CC list a bit as this is getting offtopic for the original thread]
On 05/03/2024 13:14, Sumit Garg wrote:
> On Tue, 5 Mar 2024 at 18:21, Caleb Connolly wrote:
>>
>>
>>
>> On 05/03/2024 12:35, Sumit Garg wrote:
>>> Hi Caleb,
>>>
>>> On Mon, 4 Mar 2024 at 22:22, Caleb Connolly
>>> wrote:
On 2024-03-05 11:11, Quentin Schulz wrote:
> Hi all,
>
> On 3/5/24 10:36, Christopher Obbard wrote:
>> [You don't often get email from chris.obb...@collabora.com. Learn why this
>> is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> Hi Jonas & Trevor,
>>
>> On Tue, 2024-03-05 at
Add a test for the button_cmd feature. This validates that commands can
be mapped to two buttons, that the correct command runs based on which
button is pressed, that only 1 command is run, and that no command runs
if button_cmd_0_name is wrong or unset.
Additionally, fix a potential uninitialised
The current ordering always results in func pointing to the next
function in the init_sequence. e.g. if fdtdec_setup() fails, ret will
be set to the error code, then func will be updated to point to
initf_malloc(), only then is ret checked and the loop broken. The end
result of this is that the "in
On Tue, Mar 05, 2024 at 02:55:13PM +, Caleb Connolly wrote:
> The current ordering always results in func pointing to the next
> function in the init_sequence. e.g. if fdtdec_setup() fails, ret will
> be set to the error code, then func will be updated to point to
> initf_malloc(), only then is
I had previously set CONFIG_64BIT for arm64. This patchset does the
same thing for sandbox64 and x86_64. (Mips and riscv were already
doing it). This CONFIG option is used in the Makefile to determine
if it's a 32 or 64 bit system for the CHECKER.
Makefile
1052 # the checker needs the correc
Select CONFIG_64BIT so that we pass the -m64 option (instead of -m32) to
static analysis tools.
Signed-off-by: Dan Carpenter
---
arch/sandbox/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index 0ce77de2fcb4..c431da60e8c4 100644
--- a/arch
Select CONFIG_64BIT so that we pass the -m64 option (instead of -m32) to
static analysis tools.
Signed-off-by: Dan Carpenter
---
arch/x86/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 99e59d94c606..fb7772936cd5 100644
--- a/arch/x86/Kconfig
On 3/5/24 1:50 PM, Michael Walle wrote:
Hi Marek,
Hi,
On Tue Mar 5, 2024 at 1:31 PM CET, Marek Vasut wrote:
On 3/5/24 9:55 AM, Michael Walle wrote:
On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut wrote:
Some Winbond SPI NORs have special SR3 register which is
used among other things to cont
On Fri, Feb 23, 2024 at 05:18:42PM +0100, Michal Simek wrote:
> There is no reason to describe u-boot.itb on system without SPL. Pretty
> much this is cover all systems which are using only boot.bin which contains
> all images inside.
>
> Signed-off-by: Michal Simek
> ---
>
> board/xilinx/common/
On Tue Mar 5, 2024 at 4:37 PM CET, Marek Vasut wrote:
> On 3/5/24 1:50 PM, Michael Walle wrote:
> > Hi Marek,
>
> Hi,
>
> > On Tue Mar 5, 2024 at 1:31 PM CET, Marek Vasut wrote:
> >> On 3/5/24 9:55 AM, Michael Walle wrote:
> >>> On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut wrote:
> Some Winb
On Mon, 12 Feb 2024 09:37:08 +0200, Dmitry Baryshkov wrote:
> The functions virtio_pci_get_config() and virtio_pci_set_config() don't
> take the offset into account when reading the config space. For example
> this manifests when U-Boot tries to read the MAC address of the VirtIO
> networking devi
On Fri, 23 Feb 2024 18:17:00 -0600, Jonathan Humphreys wrote:
> This series enables OSPI support for AM64x by setting the proper configs, and
> DT
> entries for SPL.
>
> fixes: fa09b12dc5f6 ("arm: ti: k3: Resync dts files and bindings with Linux
> Kernel v5.14")
>
> Changes from v1:
> - remove
On Mon, 26 Feb 2024 08:14:15 +0100, Michael Trimarchi wrote:
> Allow boards that use ti_spl_template to not use optee part in
> configuration.
> Vendor can have module with 256 Mb of memory and they try to optimize
> the available memory just using the essential components.
> This change allow to
On Fri, 23 Feb 2024 18:23:04 -0600, Jonathan Humphreys wrote:
> This series enables OSPI storage and boot.
>
> fixes: 58d61fb5a77e ("arm: dts: k3-j721e-sk: Add initial A72 specific dts
> support")
>
> Changes from v1:
> - added patch to remove the OSPI phy pattern partition, as it wasn't used
>
On Mon, 22 Jan 2024 11:30:44 +0100, Romain Naour wrote:
> Clock names has been updated in kernel 5.19+ with the removal of
> non-standard node names [1]. Due to this change, ft_opp_clock_fixups()
> doesn't work anymore since ft_fixup_clocks() is looking to the clock
> name and ft_opp_clock_fixups(
On Mon, Feb 26, 2024 at 03:19:06PM -0600, Bryan Brattlof wrote:
> **Note:** This series depends on the v6 OF_UPSTREAM work from Sumit[0].
> Patch #11 was added to fix some Makefile.spl targets to allow SPL builds
> to complete with the OF_UPSTREAM series.
>
> The AM62Px is an extension of the ex
Enable OF_UPSTREAM for AM64-EVM and SK-AM64 boards. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.7-rc7).
Signed-off-by: Andrew Davis
---
Changes for v2:
- Rebased on latest -next to fix merge conflict
As
On 3/5/24 4:53 PM, Michael Walle wrote:
On Tue Mar 5, 2024 at 4:37 PM CET, Marek Vasut wrote:
On 3/5/24 1:50 PM, Michael Walle wrote:
Hi Marek,
Hi,
On Tue Mar 5, 2024 at 1:31 PM CET, Marek Vasut wrote:
On 3/5/24 9:55 AM, Michael Walle wrote:
On Mon Mar 4, 2024 at 5:16 PM CET, Marek Vasut
From: "Leon M. Busch-George"
The error message "bc: command not found" is easily missed since the
build continues.
bc is not a part of coreutils or base-devel. POSIX sh can also do the
calculation.
Signed-off-by: Leon M. Busch-George
---
Makefile | 13 +
1 file changed, 9 insertion
On Tue Mar 5, 2024 at 5:28 PM CET, Marek Vasut wrote:
> On 3/5/24 4:53 PM, Michael Walle wrote:
> > On Tue Mar 5, 2024 at 4:37 PM CET, Marek Vasut wrote:
> >> On 3/5/24 1:50 PM, Michael Walle wrote:
> >>> On Tue Mar 5, 2024 at 1:31 PM CET, Marek Vasut wrote:
> On 3/5/24 9:55 AM, Michael Walle
On 2024-03-05 14:45, Trevor Woerner wrote:
> On Tue 2024-03-05 @ 10:17:10 AM, Jonas Karlman wrote:
>> Hi,
>>
>> On 2024-03-05 06:40, Eugen Hristev wrote:
>>> On 3/5/24 04:10, Trevor Woerner wrote:
Following the pattern of other Rockchip devices, enable the U-Boot
environment to be stored
On March 5, 2024 thus sayeth Vignesh Raghavendra:
>
>
> On 05/03/24 01:57, Bryan Brattlof wrote:
> > Hey Vignesh!
> >
> > On March 4, 2024 thus sayeth Vignesh Raghavendra:
> >> Hi Wadim,
> >>
> >> On 26/02/24 19:00, Wadim Egorov wrote:
> >>> Texas Instruments has begun enabling security settin
On 3/5/2024 11:04 PM, Bryan Brattlof wrote:
> On March 5, 2024 thus sayeth Vignesh Raghavendra:
>>
>> On 05/03/24 01:57, Bryan Brattlof wrote:
>>> Hey Vignesh!
>>>
>>> On March 4, 2024 thus sayeth Vignesh Raghavendra:
Hi Wadim,
On 26/02/24 19:00, Wadim Egorov wrote:
> Texas
On Mon, 19 Feb 2024 14:11:44 +0530, Sumit Garg wrote:
> QCS404 supports Synopsys Designware Ethernet QOS IP and we already have
> the corresponding glue layer present upstream as:
> drivers/net/dwc_eth_qos_qcom.c. So enable corresponding support.
>
> Along with that it is possible for Qualcomm p
A colleague made me aware that the '[ -n "$$end" ]' is not necessary since
'read' already returns an exit code.
v3 inc
On Mon, 4 Mar 2024 21:38:56 +0100
"Leon M. Busch-George" wrote:
> From: "Leon M. Busch-George"
>
> The error message "bc: command not found" is easily missed since the
> bu
On Mon, Mar 4, 2024 at 8:49 AM Benjamin Hahn wrote:
>
> The polling rate is already specified in some devicetrees, like
> imx8mp.dtsi for example, but was not selected so far. For the
> trippoints, the cpu-thermal node is used. Also get the polling rate from
> this node. Use the default of 5000ms
On Mon, Mar 4, 2024 at 1:04 PM Benjamin Hahn wrote:
> +enum phytec_som_type_str {
> + PCM = 0,
> + PCL,
> + KSM,
> + KSP,
> +};
To avoid potential name clashes in the future, I suggest adding a prefix like:
SOM_TYPE_PCM = 0,
SOM_TYPE_PCL,
...
> +
> static const char
On Mon, Mar 4, 2024 at 1:04 PM Benjamin Hahn wrote:
> - ret = phytec_get_rev(NULL);
> - if (ret >= 3 && ret != PHYTEC_EEPROM_INVAL) {
> + u8 rev = phytec_get_rev(NULL);
> + u8 somtyp = phytec_get_som_type(NULL);
Nitpick: Better to spell out 'somtype' or 'som_type' to make
On Tue, Mar 05, 2024 at 09:10:59AM +0100, Heinrich Schuchardt wrote:
> On 3/5/24 08:54, Conor Dooley wrote:
> > On Tue, Mar 05, 2024 at 08:34:20AM +0100, Heinrich Schuchardt wrote:
> > > On 3/5/24 00:28, Conor Dooley wrote:
> > > > From: Conor Dooley
> > > According to
> > > https://github.com/ris
From: Benjamin Gray
Python 3.6 introduced a DeprecationWarning for invalid escape sequences.
This is upgraded to a SyntaxWarning in Python 3.12, and will eventually
be a syntax error.
Fix these now to get ahead of it before it's an error.
Signed-off-by: Benjamin Gray
Message-ID: <2023091206080
When copying the build system for Linux we missed to replace some
instances of 'Documentation' by 'doc'.
Signed-off-by: Heinrich Schuchardt
---
doc/sphinx/maintainers_include.py | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/doc/sphinx/maintainers_include.py
b/doc/s
On 3/5/24 5:55 PM, Michael Walle wrote:
[...]
Clearing this SR3 WPS bit fixes that problem, both in U-Boot and in
Linux, since Linux that is booted afterward then gets a device that has
locking scheme configured in a way that Linux expects and can operate.
Better yet, if some old LTS version o
On 3/4/24 23:15, Ivan Orlov wrote:
From the current documentation it is not entirely obvious where to take
some of the u-boot build artifacts in order to flash them to the sd
card. Extend the "Program the SD card" block by providing relative paths
to the jh7110-starfive-visionfive-2.dtb and u-bo
On Tue Mar 5, 2024 at 7:54 PM CET, Marek Vasut wrote:
> On 3/5/24 5:55 PM, Michael Walle wrote:
>
> [...]
>
> >> Clearing this SR3 WPS bit fixes that problem, both in U-Boot and in
> >> Linux, since Linux that is booted afterward then gets a device that has
> >> locking scheme configure
On Tue, Mar 5, 2024 at 7:51 AM Adam Ford wrote:
>
> On Tue, Mar 5, 2024 at 7:48 AM Sumit Garg wrote:
> >
> > Hi Adam,
> >
> > On Wed, 28 Feb 2024 at 12:29, Sumit Garg wrote:
> > >
> > > Hi Adam,
> > >
> > > On Wed, 28 Feb 2024 at 04:42, Adam Ford wrote:
> > > >
> > > > On Mon, Feb 26, 2024 at 2
There are cases when previous bootloader stage leaves some seemingly
valid value in r0, which in fact does not point to valid FDT
blob. This behavior was encountered when trying to boot U-Boot as
"hyp" loader on SA8155P-ADP.
To be sure that we really got the pointer to a device tree we need to
val
Add pinctrl and GPIO driver for SM8150. Driver code is based on the
similar U-Boot drivers. All constants are taken from the corresponding
Linux driver. This drivers differs from the similar U-Boot drivers,
because SM8150 SoC have different function IDs for the same functions
on different pins.
Si
The current behaviour does a bitwise OR of the previous and new
divider values, this is wrong as some bits maybe be set already. We
need to clear all the divider bits before applying new ones.
This fixes potential issue with 1Gbit ethernet on SA8155P-ADP boards.
Signed-off-by: Volodymyr Babchuk
Now sub-drivers for particular SoCs can register them as power domain
drivers. This is needed for upcoming SM8150 support, because it needs
to power up the Ethernet module.
Signed-off-by: Volodymyr Babchuk
---
Changes in v2:
- Reworked qcom_cc_bind() function
- Added timeout to qcom_power_set
Add clock, reset and power domain driver for SM8150. Driver code is
based on the similar U-Boot drivers. All constants are taken from the
corresponding Linux driver.
This driver supports clock rate setting only for the debug UART and
RGMII/Ethernet modules, because this is all I can test right now
SA8155P Automotive Development Platform is Qualcomm SA8155-based board
for developers. The nice thing that it has unlocked loaders with test
keys support, which means that U-Boot for this platform can be
launched at earlier stages.
This patch adds basic board support with only serial port and
netw
This patch is the preparation for SM8150 support. This new SoC
depending on the particular pin can have different numbers for the
same function. For example "rgmii" function for GPIO4 has id=2 while
for GPIO59 it has id=1. So, to support this type of SoCs,
get_function_mux() callback needs to know
Add support for Qualcomm SM8150 SoC to the EQOS driver. SM8150 has two
main differences from already supported QCS404: it has another RGMII
configuration registers set and it does require RGMII loopback to
be disabled.
To support different variants of QCOM SoC we had to add two new fields
to the e
This patch series adds support for Qualcomm SA8155-ADP development
board. Main motivation for this series is to allow running
virtualization software on this board and U-Boot is a good way to
break Qualcomm's boot chain at EL2 with more convenient ways for
uploading and running the code. With thi
On 3/5/24 10:41 PM, Michael Walle wrote:
On Tue Mar 5, 2024 at 7:54 PM CET, Marek Vasut wrote:
On 3/5/24 5:55 PM, Michael Walle wrote:
[...]
Clearing this SR3 WPS bit fixes that problem, both in U-Boot and in
Linux, since Linux that is booted afterward then gets a device that has
locking sche
Previously PLL node was missing from SPL dts. This caused BUS_ROOT
to stay on OSC clock (24Mhz). As a result, all peripherals have to
run at a much lower frequency, and loading from sdcard/emmc is slow.
Thus, enabling PLL node in dts to fix this.
Signed-off-by: Bo Gan
---
arch/riscv/dts/jh7110-u
Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.
Revert this patch once soft ecc support is fixed in future.
Signed-off-by: Ashok Reddy Soma
Signed-off-by: Venkatesh Yadav Abbarapu
---
Changes in
The below exception observed on QEMU, as it doesn't support
NAND controller.
"Synchronous Abort" handler, esr 0x9605, far 0x17acfc878
elr: 0803ad40 lr : 0805f438 (reloc)
elr: 7fcb4d40 lr : 7fcd9438
x0 : 7bbfc880 x1 : ff10
x2 : 7fcf059
On Tue, Mar 05, 2024 at 09:29:22AM +0800, zhangzj wrote:
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +static int rk3588_add_reserved_memory_fdt_nodes(void *new_blob)
> +{
> + struct fdt_memory gap1 = {
> + .start = 0x3fc00,
> + .end = 0x3fc4f,
> + };
> + struct
Hi Volodymyr,
On Wed, 6 Mar 2024 at 06:23, Volodymyr Babchuk
wrote:
>
> SA8155P Automotive Development Platform is Qualcomm SA8155-based board
> for developers. The nice thing that it has unlocked loaders with test
> keys support, which means that U-Boot for this platform can be
> launched at ear
On Wed, 6 Mar 2024 at 06:23, Volodymyr Babchuk
wrote:
>
> There are cases when previous bootloader stage leaves some seemingly
> valid value in r0, which in fact does not point to valid FDT
> blob. This behavior was encountered when trying to boot U-Boot as
> "hyp" loader on SA8155P-ADP.
>
> To be
On Wed, 6 Mar 2024 at 06:23, Volodymyr Babchuk
wrote:
>
> The current behaviour does a bitwise OR of the previous and new
> divider values, this is wrong as some bits maybe be set already. We
> need to clear all the divider bits before applying new ones.
>
> This fixes potential issue with 1Gbit e
1 - 100 of 110 matches
Mail list logo
