> The bootdevs have a natural priority, based on the assumed speed of
> the device, so the board would only need to intervene (with an env var
> or a devicetree property) when that is wrong.
Does this make sense in general? The default boot order for a
board should depend on what is available on b
Hi,
Am 2022-01-19 15:56, schrieb Simon Glass:
On Wed, 19 Jan 2022 at 01:09, Michael Walle wrote:
> The bootflow feature provide a built-in way for U-Boot to automatically
> boot an Operating System without custom scripting and other customisation.
> This is called 'standard boot' since it pr
Hi Sughosh,
2022年1月20日(木) 3:56 Sughosh Ganu :
> +static int fwu_gpt_update_mdata(struct fwu_mdata *mdata)
> +{
> + int ret;
> + struct blk_desc *desc;
> + u16 primary_mpart = 0, secondary_mpart = 0;
> +
I think this update_mdata() method (or fwu_update_mdata() wrapper)
should a
able in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-amlogic.git
tags/u-boot-amlogic-20220120
for you to fetch changes up to 09c2debab70271fdb3b1ff89e0e7d186502c548d:
board: amlogic: vim3: configure serial# from ethaddr (2022-01-20
On 1/19/22 19:55, Sughosh Ganu wrote:
The patchset adds support for the FWU Multi Bank Update[1]
feature. Certain aspects of the Dependable Boot[2] specification have
also been implemented.
The document "Platform Security Firmware Update for the A-profile Arm
Architecture Beta" [1] that you rel
> From: Michael Walle
> Date: Thu, 20 Jan 2022 09:35:44 +0100
>
> > The bootdevs have a natural priority, based on the assumed speed of
> > the device, so the board would only need to intervene (with an env var
> > or a devicetree property) when that is wrong.
>
> Does this make sense in general
On 1/19/22 19:55, Sughosh Ganu wrote:
Add helper functions needed for accessing the FWU metadata which
contains information on the updatable images. These functions have
been added for the STM32MP157C-DK2 board which has the updatable
images on the uSD card, formatted as GPT partitions.
Signed-o
Hi Marek,
On Mon, Jan 17, 2022 at 6:54 PM Marek Vasut wrote:
>
> In case the eMMC contains any GP partitions or user sets up new GP
> partitions, the size of these GP partitions reduce the size of the
> USER partition. Subtract the size of those GP partitions from the
> calculated size of USER pa
On 1/19/22 19:55, Sughosh Ganu wrote:
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
partition. Add functions for reading from and writing to the metadata
when the updatable images and the metadata are stored on a
Hello all,
I'm working on a new USB device controller driver for U-Boot.
And I need some advice how to properly implement it.
Could you please describe what is gadget.ep0?
- Why ep0 defined separetly (not included in end points list)?
- Why other end-points has "in" and "out" `struct usb_ep` desc
Hi Tony,
On 1/20/22 01:28, Tony Dinh wrote:
Add board include header and defconfig files for Pogoplug V4
Signed-off-by: Tony Dinh
---
Changes in v3:
- Migrate config symbols from board include header to defconfig
- Remove obsolete config symbols from header file
- Don't use ifdefs for unselec
On 1/19/22 19:55, Sughosh Ganu wrote:
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, which is stored on
a dedicated partition. Add the metadata structure, and functions to
access the metadata. These are generic API's, and implem
On 1/19/22 19:55, Sughosh Ganu wrote:
The FWU Multi Bank Update feature allows the platform to boot the
firmware images from one of the partitions(banks). The first stage
bootloader(fsbl) passes the value of the boot index, i.e. the bank
from which the firmware images were booted from to U-Boot.
On 1/19/22 19:55, Sughosh Ganu wrote:
Add a command to read the metadata as specified in the FWU
specification and print the fields of the metadata.
Signed-off-by: Sughosh Ganu
---
Changes since V2:
* Include the log.h and stdio.h header files
cmd/Kconfig | 7 ++
cmd/Makefile|
On Mon, Jan 17, 2022 at 7:27 PM Angus Ainslie wrote:
>
> Add a JEDEC id for the Winbond W25Q16JV 16M-BIT serial flash memory with
> DUAL/QUAD SPI
>
> Changes since v2:
>
> Chagned the name to follow "DTR" parts
>
> Changes since v1:
>
> Updated the name for more suffixes
>
> Signed-off-by: Angus A
On Sat, Dec 18, 2021 at 1:52 AM Roman Bacik wrote:
>
> From: Rayagonda Kokatanur
>
> IPROC qspi driver supports both BSPI and MSPI modes.
>
> Signed-off-by: Rayagonda Kokatanur
> Signed-off-by: Bharat Gooty
> Acked-by: Rayagonda Kokatanur
>
> Signed-off-by: Roman Bacik
> ---
>
> Changes in v1
On Fri, Dec 17, 2021 at 12:14 AM Chris Morgan wrote:
>
> From: Chris Morgan
>
> Add support for slc-mode implemented in Linux for the Toshiba
> TC58TEG5DCLTA00 NAND and Hynix H27UCG8T2ETR NAND flash found on the NTC
> CHIP. This requires the addition of a paired-pages scheme, a new
> parameter fo
>> + {
>> + INFO("w25q16jvm", 0xef7015, 0, 64 * 1024, 32,
>
> Can this name as "w25q16jv-im/jm" ?
FWIW, "w25q15jvm" would be the "correct" name in linux. Although for this
particular flash the name in linux is "w25q16jv-im/jm"..
Anyhow, see [1] for a lengthy discussion on tha
On Tue, Jan 11, 2022 at 6:16 PM Andre Przywara wrote:
>
> On the Allwinner H6 SoC both the SPI0 and the eMMC device share one pin,
> so cannot be used simultaneously. On Linux this is a showstopper, since
> only one of them would be able to claim the pin, and the probe order is
> somewhat random.
On 1/16/22 23:11, Heinrich Schuchardt wrote:
Placing Unicode control codes in the middle of a comment
does not make much sense. Let's get rid of all Unicode in
drivers/ram/octeon/octeon3_lmc.c.
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
drivers/ram/
Hello Alistair!
On Wednesday 19 January 2022 14:48:21 Alistair Delva wrote:
> Hi Pali,
>
> Sorry for the late reply..
>
> On Thu, Jan 13, 2022 at 4:34 AM Pali Rohár wrote:
> >
> > Hello!
> >
> > Now I see that you have merged commit 4f2e2280862a ("RFC: arm: pci: Add
> > PCI cam support to PCI-E
Hello Mark!
On Thursday 20 January 2022 00:23:02 Mark Kettenis wrote:
> CAM is just a version of ECAM that only gives you access to the
> classic PCI config space (register offsets < 256). This has very
> little to do with the classic "mode 1" and "mode 2" config space
> access methods of the x86
Hi Fabio,
On 2022-01-18 08:59, Fabio Estevam wrote:
Hi Angus,
On Sun, Nov 28, 2021 at 12:42 PM Angus Ainslie wrote:
[1]
diff --git a/arch/arm/dts/imx8mq-librem5.dts
b/arch/arm/dts/imx8mq-librem5.dts
index b28420654f..b60a8538af 100644
--- a/arch/arm/dts/imx8mq-librem5.dts
+++ b/arch/arm/dts/
Hi Angus,
On Thu, Jan 20, 2022 at 10:56 AM Angus Ainslie wrote:
> I decided to bypass the devicetree to test it on the imx8mq
>
> static const iomux_v3_cfg_t configure_pads[] = {
>IMX8MQ_PAD_GPIO1_IO03__GPIO1_IO3 | MUX_PAD_CTRL(PAD_CTL_DSE6)
> | MUX_MODE_SION,
>IMX8MQ_PAD
Hi Jagan,
On 2022-01-20 04:55, Jagan Teki wrote:
On Mon, Jan 17, 2022 at 7:27 PM Angus Ainslie wrote:
Add a JEDEC id for the Winbond W25Q16JV 16M-BIT serial flash memory
with
DUAL/QUAD SPI
Changes since v2:
Chagned the name to follow "DTR" parts
Changes since v1:
Updated the name for mo
On Thu, 20 Jan 2022 19:08:57 +0530
Jagan Teki wrote:
Hi,
> On Tue, Jan 11, 2022 at 6:16 PM Andre Przywara wrote:
> >
> > On the Allwinner H6 SoC both the SPI0 and the eMMC device share one pin,
> > so cannot be used simultaneously. On Linux this is a showstopper, since
> > only one of them woul
On Thu, Jan 20, 2022 at 7:36 PM Andre Przywara wrote:
>
> On Thu, 20 Jan 2022 19:08:57 +0530
> Jagan Teki wrote:
>
> Hi,
>
> > On Tue, Jan 11, 2022 at 6:16 PM Andre Przywara
> > wrote:
> > >
> > > On the Allwinner H6 SoC both the SPI0 and the eMMC device share one pin,
> > > so cannot be used s
On Thu, Jan 20, 2022 at 7:53 PM wrote:
>
> On 1/20/22 3:20 PM, Michael Walle wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> > content is safe
> >
> >>> + {
> >>> + INFO("w25q16jvm", 0xef7015, 0, 64 * 1024, 32,
> >>
> >> Can this name a
On Thu, Jan 20, 2022 at 10:39:03AM +0900, AKASHI Takahiro wrote:
> Heinrich,
>
> On Wed, Jan 19, 2022 at 05:08:14PM +0100, Heinrich Schuchardt wrote:
> > On 1/18/22 05:39, AKASHI Takahiro wrote:
> > > Add CONFIG_TOOLS_MKEFICAPSULE. Then we want to always build mkeficapsule
> > > if tools-only_defc
Hi,
Here is an RFC series of patches for the FWU Multi Bank Update
support for the DeveloperBox platform. This series depends on
Sughosh's Multi Bank Update v3 [1]. Thus if that is updated,
this must be rebased and updated too.
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=281875
T
Use strlcpy() instead of strcpy() to prevent copying the
entity name over the name buffer size.
Signed-off-by: Masami Hiramatsu
---
drivers/dfu/dfu.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index af3975925a..66c41b5e76 100644
-
If dfu_alt_info has repeated spaces or tab (for indentation or
readability), the dfu fails to parse it. For example, if
dfu_alt_info="mtd nor1=image raw 10 20" (double spaces
after "raw"), the image entity start address is '0' and the size
'0x10'. This is because the repeated space is
When parsing the dfu_alt_info, check the number of arguments
and argument string strictly. If there is any garbage data
(which is not able to be parsed correctly) in dfu_alt_info,
that means something wrong and user may make a typo or mis-
understanding about the syntax. Since the dfu_alt_info is
u
Fix some typo and wrong information about dfu_alt_info.
Signed-off-by: Masami Hiramatsu
---
doc/usage/dfu.rst | 45 +
1 file changed, 33 insertions(+), 12 deletions(-)
diff --git a/doc/usage/dfu.rst b/doc/usage/dfu.rst
index 11c88072b8..25517637ae 1
Since dfu is not only used for USB, and some platform only
supports DFU_OVER_TFTP or EFI capsule update, dfu_alt_info
is defined on such platforms too.
For such platform, 'dfu list' command is useful to check
how the current dfu_alt_info setting is parsed.
Signed-off-by: Masami Hiramatsu
---
cm
To avoid calculating crc32 in several places, do it in
gpt_update_mdata(). This also ensures the mdata crc32
is always sane.
Signed-off-by: Masami Hiramatsu
---
lib/fwu_updates/fwu_mdata.c | 18 --
lib/fwu_updates/fwu_mdata_gpt_blk.c | 13 -
2 files change
It is better if a function which returns an error then release
all allocated memory resources. This simplifies the mind model
and less chance to forgot to free memory and double free.
Signed-off-by: Masami Hiramatsu
---
lib/fwu_updates/fwu_mdata_gpt_blk.c | 11 ---
1 file changed, 8 in
Remove some FWU metadata operations which only access or
modify the metadata itself from fwu_mdata_ops and move
it in fwu_mdata.c.
Signed-off-by: Masami Hiramatsu
---
include/fwu.h |9 ---
lib/fwu_updates/fwu_mdata.c | 105 ---
l
This changes SPI NOR flash partition layout for TBBR and
also make the U-Boot as position independent executable
again because BL33 is loaded on the memory.
With enabling TBBR, TF-A BL2 loads all BL3x images from
FIP image, and the U-Boot image is added to the FIP image
as BL33, and loaded to memo
Reboot to the trial state soon after successfully installing
the new firmware to the next bank and updating the active_index.
This is enabled by CONFIG_FWU_REBOOT_AFTER_UPDATE and is a
recommended option.
Signed-off-by: Masami Hiramatsu
---
lib/efi_loader/efi_capsule.c | 10 --
lib/fwu
Signed-off-by: Masami Hiramatsu
---
include/fwu.h | 13 ++
lib/fwu_updates/Kconfig| 34 ++
lib/fwu_updates/Makefile |5 -
lib/fwu_updates/fwu_mdata_sf.c | 241
4 files changed, 288 insertions(+), 5 deletions(-)
The DeveloperBox platform can support the FWU Multi bank
update. SCP firmware will switch the boot mode by DSW3-4
and load the Multi bank update supported TF-A BL2 from
0x60 offset on the SPI flash. Thus it can co-exist
with the legacy boot mode (legacy U-Boot or EDK2).
Signed-off-by: Masami H
Since the FWU metadata is not initialized at the installation,
if it is broken, it should be initialized. Usually, the FWU
metadata is not covered by capsule update, so it is safe to
initialize the metadata portion if it seems broken.
But for the production device, usually firmware will be install
Enable FWU Multi-Bank support for DeveloperBox SynQuacer platform.
This also enables fwu_metadata_read command and "reboot soon after
update" option.
Signed-off-by: Masami Hiramatsu
---
configs/synquacer_developerbox_defconfig |7 +++
1 file changed, 7 insertions(+)
diff --git a/configs
On 1/20/22 01:04, Marek Behún wrote:
From: Marek Behún
Add macro fdt_for_each_node_by_compatible() to allow iterating over
fdt nodes by compatible string.
Convert various usages of
off = fdt_node_offset_by_compatible(fdt, start, compat);
while (off > 0) {
code();
of
On 1/10/22 11:47, Marek Behún wrote:
From: Pali Rohár
On of the MiniPCIe ports on Turris Omnia is also a mSATA port. Whether
it works in SATA or PCIe mode is determined by a strapping pin, which
value is read from the MCU.
We already determine which type of card is connected when configuring
S
On 1/13/22 14:28, Pali Rohár wrote:
Kirkwood uses macros KW_DEFADR_PCI_MEM and KW_DEFADR_PCI_IO for base
address of PCIe mappings. Size of PCIe windows is not defined in any macro
yet, so export them in new KW_DEFADR_PCI_MEM_SIZE and KW_DEFADR_PCI_IO_SIZE
macros.
Kirkwood arch code already maps
On Thu, Jan 20, 2022 at 4:33 AM Michal Simek wrote:
> On 1/19/22 23:52, Ricardo Salveti wrote:
> > The available ram can be limited by ram_top as that depends on the
> > reserved memory nodes provided by the device-tree (via
> > board_get_usable_ram_top), so make sure to respect ram_top when setti
On 1/14/22 14:31, Pali Rohár wrote:
Hello Stefan,
this is v4 of series that adds more checks for kwbimage validity and
consistency to SPL, mainly checking image data checksum.
Patches now passed Github CI testing:
https://github.com/u-boot/u-boot/pull/106
Changes since v3:
- fix compile erros
On 1/16/22 23:11, Heinrich Schuchardt wrote:
Placing Unicode control codes in the middle of a comment
does not make much sense. Let's get rid of all Unicode in
drivers/ram/octeon/octeon3_lmc.c.
Signed-off-by: Heinrich Schuchardt
Applied to u-boot-marvell/master
Thanks,
Stefan
---
driver
On 1/18/22 10:33, Pali Rohár wrote:
Convert Turris MOX's comphy_update_map() to board_fix_fdt() and then
remove it.
Pali Rohár (2):
arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()
phy: marvell: Remove unused function comphy_update_map()
board/CZ.NIC/turris_mox/tur
On 1/18/22 10:43, Pali Rohár wrote:
After next branch was merged to v2022.01 release, U-Boot on A3720 started
printing "" line on UART during booting. There is no need to
print this debug line by default, so disable it via config option
CONFIG_DEBUG_UART_ANNOUNCE in all config files for Armada 37
Hi Tom,
please pull the next batch of mostly Marvell MVEBU related patches:
- fdt_support: Add fdt_for_each_node_by_compatible() helper macro (Marek)
- turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob (Pali)
- pci_mvebu
On Thu, Jan 20, 2022 at 08:23:24AM +0100, Heinrich Schuchardt wrote:
> Dear Tom,
>
> I put the patch to replace @return by Return: in code comments into a
> separate pull request at it is touching so many files. As we have a lot of
> churn in U-Boot we have to put in the patch close after prepara
> Merge tag 'xilinx-for-v2022.04-rc1' of
> https://source.denx.de/u-boot/custodians/u-boot-microblaze (2022-01-19
> 11:43:44 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-amlogic.git
> tags/u-boot-amlogi
On Sat, Jan 15, 2022 at 04:02:05PM -0500, Jesse Taube wrote:
>
>
> On 1/10/22 00:13, Tnze Jdao wrote:
> > I tested this patch and tried to run it on my LicheePi Nano. It works, but
> > I found there is WARNINGs when compile the code:
> > ---
> > include/configs/sunxi-common.h:128:0: warning:
Hi Mark,
On Thu, 20 Jan 2022 at 03:29, Mark Kettenis wrote:
>
> > From: Michael Walle
> > Date: Thu, 20 Jan 2022 09:35:44 +0100
> >
> > > The bootdevs have a natural priority, based on the assumed speed of
> > > the device, so the board would only need to intervene (with an env var
> > > or a de
Hi Michael,
On Thu, 20 Jan 2022 at 01:38, Michael Walle wrote:
>
> Hi,
>
> Am 2022-01-19 15:56, schrieb Simon Glass:
> > On Wed, 19 Jan 2022 at 01:09, Michael Walle wrote:
> >>
> >>
> >> > The bootflow feature provide a built-in way for U-Boot to automatically
> >> > boot an Operating System wit
On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> Hi Mark,
>
> On Thu, 20 Jan 2022 at 03:29, Mark Kettenis wrote:
> >
> > > From: Michael Walle
> > > Date: Thu, 20 Jan 2022 09:35:44 +0100
> > >
> > > > The bootdevs have a natural priority, based on the assumed speed of
> > > > the d
On 1/20/22 13:12, Chris Morgan wrote:
On Sat, Jan 15, 2022 at 04:02:05PM -0500, Jesse Taube wrote:
On 1/10/22 00:13, Tnze Jdao wrote:
I tested this patch and tried to run it on my LicheePi Nano. It works, but I
found there is WARNINGs when compile the code:
---
include/configs/sunxi-c
On Thu, Jan 20, 2022 at 05:31:09PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the next batch of mostly Marvell MVEBU related patches:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
Replace @return and @param.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_file.c | 2 +-
lib/efi_loader/efi_freestanding.c | 8
lib/efi_loader/efi_gop.c | 2 +-
lib/efi_loader/helloworld.c
> Date: Thu, 20 Jan 2022 13:30:47 -0500
> From: Tom Rini
>
> On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> > Hi Mark,
> >
> > On Thu, 20 Jan 2022 at 03:29, Mark Kettenis wrote:
> > >
> > > > From: Michael Walle
> > > > Date: Thu, 20 Jan 2022 09:35:44 +0100
> > > >
> > > > > Th
On 1/18/22 05:39, AKASHI Takahiro wrote:
With this enhancement, mkeficapsule will be able to sign a capsule
file when it is created. A signature added will be used later
in the verification at FMP's SetImage() call.
To do that, we need specify additional command parameters:
-monotonic-cout :
The available ram can be limited by ram_top as that depends on the
reserved memory nodes provided by the device-tree (via
board_get_usable_ram_top), so make sure to respect ram_top when setting
up bootm_size to avoid overlapping reserved memory regions (e.g. memory
used by OP-TEE).
The same logic
Hi Mark,
On Thu, 20 Jan 2022 at 11:56, Mark Kettenis wrote:
>
> > Date: Thu, 20 Jan 2022 13:30:47 -0500
> > From: Tom Rini
> >
> > On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> > > Hi Mark,
> > >
> > > On Thu, 20 Jan 2022 at 03:29, Mark Kettenis
> > > wrote:
> > > >
> > > > >
Hi Tom,
On Thu, 20 Jan 2022 at 11:30, Tom Rini wrote:
>
> On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> > Hi Mark,
> >
> > On Thu, 20 Jan 2022 at 03:29, Mark Kettenis wrote:
> > >
> > > > From: Michael Walle
> > > > Date: Thu, 20 Jan 2022 09:35:44 +0100
> > > >
> > > > > The bo
On Thu, Jan 20, 2022 at 12:56:55PM -0700, Simon Glass wrote:
> Hi Tom,
>
> On Thu, 20 Jan 2022 at 11:30, Tom Rini wrote:
> >
> > On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> > > Hi Mark,
> > >
> > > On Thu, 20 Jan 2022 at 03:29, Mark Kettenis
> > > wrote:
> > > >
> > > > > Fro
Hi Tom,
On Thu, 20 Jan 2022 at 13:08, Tom Rini wrote:
>
> On Thu, Jan 20, 2022 at 12:56:55PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Thu, 20 Jan 2022 at 11:30, Tom Rini wrote:
> > >
> > > On Thu, Jan 20, 2022 at 11:16:35AM -0700, Simon Glass wrote:
> > > > Hi Mark,
> > > >
> > > > On Th
Hi Stefan,
On Thu, Jan 20, 2022 at 3:55 AM Stefan Roese wrote:
>
> Hi Tony,
>
> On 1/20/22 01:28, Tony Dinh wrote:
> > Add board include header and defconfig files for Pogoplug V4
> >
> > Signed-off-by: Tony Dinh
> > ---
> >
> > Changes in v3:
> > - Migrate config symbols from board include head
On 1/20/2022 7:46 AM, tudor.amba...@microchip.com wrote:
FWIW, "w25q15jvm" would be the "correct" name in linux. Although for this
particular flash the name in linux is "w25q16jv-im/jm"..
would you fix it? :D
Anyhow, see [1] for a lengthy discussion on that name. That being said, I
still don
On Mon, Jan 17, 2022 at 8:37 PM Tom Rini wrote:
>
> On Fri, Dec 24, 2021 at 12:55:30PM +0530, Vignesh Raghavendra wrote:
>
> > On certain TI SoC, like AM64x there is a CPSW3G which supports 2
> > external independent MAC ports for single CPSW instance.
> > It is not possible for Ethernet driver to
From: Greentime Hu
phy_connect() may fail by returning a NULL pointer. Thus,
axiemac_phy_init() should handle the case or we may get an access
fault when it tries to dereference it.
Signed-off-by: Greentime Hu
Reviewed-by: Andy Chiu
Signed-off-by: Andy Chiu
---
drivers/net/xilinx_axi_emac.c
Separate the flow out so that it would be easiler to implement error
handling logic.
Signed-off-by: Andy Chiu
---
drivers/net/xilinx_axi_emac.c | 50 +--
1 file changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/x
Or we may get load access faults afterward.
The `phydev` field on axi-ethernet’s private struct is not set on a
failed phy_connect():
axi_emac_probe()
=> axiemac_phy_init()
=> priv->phydev = phy_connect() <--- may fail
However, all of the following calls on `axi_emac_ops` assume a valid
`phyd
From: Greentime Hu
If we just use fdtdec_get_addr_size_fixed to get "reg" it will use
64bit address cell to get the base address.
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible ="SiFive,FU500-soc", "fu500-soc", "sifive-soc", "simple-bus";
ranges;
L28: axidma@3001 {
On Fri, Jan 21, 2022 at 01:13:54AM +0200, Ramon Fried wrote:
> On Mon, Jan 17, 2022 at 8:37 PM Tom Rini wrote:
> >
> > On Fri, Dec 24, 2021 at 12:55:30PM +0530, Vignesh Raghavendra wrote:
> >
> > > On certain TI SoC, like AM64x there is a CPSW3G which supports 2
> > > external independent MAC port
On Thu, Jan 20, 2022 at 01:47:41PM -0700, Simon Glass wrote:
> Hi Tom,
>
> On Thu, 20 Jan 2022 at 13:08, Tom Rini wrote:
> >
> > On Thu, Jan 20, 2022 at 12:56:55PM -0700, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Thu, 20 Jan 2022 at 11:30, Tom Rini wrote:
> > > >
> > > > On Thu, Jan 20, 20
Hi Tom,
On Thu, 20 Jan 2022 at 16:23, Tom Rini wrote:
>
> On Thu, Jan 20, 2022 at 01:47:41PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Thu, 20 Jan 2022 at 13:08, Tom Rini wrote:
> > >
> > > On Thu, Jan 20, 2022 at 12:56:55PM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On Thu
On Thu, Jan 20, 2022 at 05:59:53PM -0700, Simon Glass wrote:
> Hi Tom,
>
> On Thu, 20 Jan 2022 at 16:23, Tom Rini wrote:
> >
> > On Thu, Jan 20, 2022 at 01:47:41PM -0700, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Thu, 20 Jan 2022 at 13:08, Tom Rini wrote:
> > > >
> > > > On Thu, Jan 20, 20
On Fri, Jan 21, 2022 at 12:31:00AM +0900, Masami Hiramatsu wrote:
> Reboot to the trial state soon after successfully installing
> the new firmware to the next bank and updating the active_index.
> This is enabled by CONFIG_FWU_REBOOT_AFTER_UPDATE and is a
> recommended option.
EFI_CAPSULE_HEADER.
Pogoplug V4 specifications:
Kirkwood 88F6192 SoC
800 MHz CPU
1Gbs Ethernet
128 MB RAM
128 MB NAND
1x USB 2.0
2x USB 3.0 (on PCIe bus)
1 SDHC slot
1x External SATA port (USM enclosure form factor slot)
Changes in v4:
- Remove CONFIG_FEATURE_COMMAND_EDITING and ifdefs for CMD_NET
in include head
Add DTS files for Pogoplug V4 board
Reviewed-by: Stefan Roese
Signed-off-by: Tony Dinh
---
(no changes since v2)
Changes in v2:
- Use mainline Linux DTS version
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180
2 file
Add Kconfig files for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
(no changes since v3)
Changes in v3:
- Migrate symbols from board include header to Kconfig
arch/arm/mach-kirkwood/Kconfig | 6 ++
board/cloudengines/pogo_v4/Kconfig | 16
2 files changed, 22 insert
Note: currently the fdt_get_phy_addr function in this file is
duplicate in this board and many other Kirkwood boards
(eg. Sheevaplug, GoFlex Home, etc.). This function is being
factored out into common area by another patch. And because it
was written for flattree only, the patch is being rewritten
Add board include header and defconfig files for Pogoplug V4
Signed-off-by: Tony Dinh
---
Changes in v4:
- Remove CONFIG_FEATURE_COMMAND_EDITING and ifdefs for CMD_NET
in include header
Changes in v3:
- Migrate config symbols from board include header to defconfig
- Remove obsolete config symbo
On Tue, 4 Jan 2022 19:34:58 -0500
Jesse Taube wrote:
Hi,
> From: Icenowy Zheng
>
> The ARMv7 start code has support for saving some boot params at the
> entry point, which is used by some SoCs to return to BROM.
>
> Port this to ARM926EJ-S start code.
>
> Signed-off-by: Icenowy Zheng
> Sig
On Tue, 4 Jan 2022 19:35:00 -0500
Jesse Taube wrote:
> From: Icenowy Zheng
>
> This commit introduces suniv dt-bindings headers needed for
> device tree files.
>
> Signed-off-by: Icenowy Zheng
> Signed-off-by: Jesse Taube
This seems to be some old copy, it doesn't match with what's in the
On Tue, 4 Jan 2022 19:35:01 -0500
Jesse Taube wrote:
> From: Icenowy Zheng
>
> This commit introduces suniv dt-bindings headers
> needed for device tree files.
>
> Signed-off-by: Icenowy Zheng
> Signed-off-by: Jesse Taube
This seems to be some old copy, it doesn't match with what's in the
On Tue, 4 Jan 2022 19:35:04 -0500
Jesse Taube wrote:
Hi,
> From: Icenowy Zheng
>
> Generic Timer Extension is not available on SUNIV.
Well, that, plus there are no ID registers with which we could query
this. But that has the same effect, so:
> Signed-off-by: Icenowy Zheng
> Signed-off-by:
On Tue, 4 Jan 2022 19:35:07 -0500
Jesse Taube wrote:
Hi,
> From: Icenowy Zheng
>
> Add device tree files for suniv and
> Lichee Pi Nano it is a board based on F1C100s.
>
> Signed-off-by: Icenowy Zheng
> Signed-off-by: Jesse Taube
Those files differ significantly from the kernel. It looks
Hi custodians,
On Sun, 9 Jan 2022 at 20:14, Simon Glass wrote:
>
>
> At present binman uses binary tools (like cbfstool, futiltiy, lz4) in an
> ad-hoc manner. Various parts of binman use tools.Run() to run tools as
> needed. If a tool is missing, an error is produced and binman stops.
>
> However
On 1/20/22 20:59, Andre Przywara wrote:
On Tue, 4 Jan 2022 19:35:07 -0500
Jesse Taube wrote:
Hi,
From: Icenowy Zheng
Add device tree files for suniv and
Lichee Pi Nano it is a board based on F1C100s.
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
Those files differ signifi
On Fri, Jan 21, 2022 at 12:31:10AM +0900, Masami Hiramatsu wrote:
> Signed-off-by: Masami Hiramatsu
> ---
> include/fwu.h | 13 ++
> lib/fwu_updates/Kconfig| 34 ++
> lib/fwu_updates/Makefile |5 -
> lib/fwu_updates/fwu_mdata_sf.c | 241
> +
On Fri, Jan 21, 2022 at 12:31:20AM +0900, Masami Hiramatsu wrote:
> The DeveloperBox platform can support the FWU Multi bank
> update. SCP firmware will switch the boot mode by DSW3-4
> and load the Multi bank update supported TF-A BL2 from
> 0x60 offset on the SPI flash. Thus it can co-exist
>
On Tue, 4 Jan 2022 19:34:59 -0500
Jesse Taube wrote:
Hi,
> From: Icenowy Zheng
>
> Some Allwinner SoCs use ARM926EJ-S core.
>
> Add Allwinner/sunXi specific code to ARM926EJ-S CPU dircetory.
>
> Signed-off-by: Icenowy Zheng
> Signed-off-by: Jesse Taube
> ---
> arch/arm/cpu/arm926ejs/Make
Hi Tom,
On Thu, 20 Jan 2022 at 18:08, Tom Rini wrote:
>
> On Thu, Jan 20, 2022 at 05:59:53PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Thu, 20 Jan 2022 at 16:23, Tom Rini wrote:
> > >
> > > On Thu, Jan 20, 2022 at 01:47:41PM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On Thu
On 1/20/22 21:25, Andre Przywara wrote:
On Tue, 4 Jan 2022 19:34:59 -0500
Jesse Taube wrote:
Hi,
From: Icenowy Zheng
Some Allwinner SoCs use ARM926EJ-S core.
Add Allwinner/sunXi specific code to ARM926EJ-S CPU dircetory.
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
---
Hi Alper,
On Sun, 16 Jan 2022 at 13:18, Alper Nebi Yasak wrote:
>
> My rk3399-gru-kevin has some problems with the eMMC. The board can boot
> to U-Boot proper with the eMMC working at a low speed, but trying to
> reinitialize it with "mmc dev 0" or "mmc rescan" makes it unusable. If
> the HS400 m
Coreboot supports U-Boot as a payload and this recently got a bit of a
facelist. Add a test for this.
For now this uses a binary build of coreboot (v4.15). Future work could
potentially build it from source, but we need to figure out the
toolchain problems first, since coreboot uses its own toolch
1 - 100 of 120 matches
Mail list logo
