On Tue, 4 Jan 2022 19:35:07 -0500
Jesse Taube <mr.bossman...@gmail.com> wrote:
Hi,
> From: Icenowy Zheng <icen...@aosc.io>
>
> Add device tree files for suniv and
> Lichee Pi Nano it is a board based on F1C100s.
>
> Signed-off-by: Icenowy Zheng <icen...@aosc.io>
> Signed-off-by: Jesse Taube <mr.bossman...@gmail.com>
Those files differ significantly from the kernel. It looks like the
copies here enable MMC, SPI and USB, which are missing from the Linux
tree. At the same time both seem to be coming from a slightly different
base. So I'd suggest to fix this up (create a minimal diff between
Linux and this, changing this version if needed), then sending this to
the kernel. Meanwhile we could go with the mainline Linux versions. I
am willing to merge them once the updates reach some maintainer tree.
Cheers,
Andre
> ---
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 64 ++++++
> arch/arm/dts/suniv-f1c100s.dtsi | 6 +
> arch/arm/dts/suniv.dtsi | 224 +++++++++++++++++++
> 4 files changed, 296 insertions(+)
> create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
> create mode 100644 arch/arm/dts/suniv.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 453e2fd1a9..07030deeca 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -497,6 +497,8 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
> stm32h743i-eval.dtb \
> stm32h750i-art-pi.dtb
>
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-a1000.dtb \
> sun4i-a10-ba10-tvbox.dtb \
> diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> new file mode 100644
> index 0000000000..919fc01b0e
> --- /dev/null
> +++ b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +/*
> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> + */
> +
> +/dts-v1/;
> +#include "suniv-f1c100s.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Lichee Pi Nano";
> + compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s",
> + "allwinner,suniv";
> +
> + aliases {
> + serial0 = &uart0;
> + spi0 = &spi0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + bus-width = <4>;
> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
> + status = "okay";
> +};
> +
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_pins_a>;
> + status = "okay";
> +
> + flash@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "winbond,w25q128", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <40000000>;
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpio = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi
> new file mode 100644
> index 0000000000..f084bc8dd1
> --- /dev/null
> +++ b/arch/arm/dts/suniv-f1c100s.dtsi
> @@ -0,0 +1,6 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +/*
> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> + */
> +
> +#include "suniv.dtsi"
> diff --git a/arch/arm/dts/suniv.dtsi b/arch/arm/dts/suniv.dtsi
> new file mode 100644
> index 0000000000..a4e933505d
> --- /dev/null
> +++ b/arch/arm/dts/suniv.dtsi
> @@ -0,0 +1,224 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> +/*
> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> + */
> +
> +#include <dt-bindings/clock/suniv-ccu.h>
> +#include <dt-bindings/reset/suniv-ccu.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&intc>;
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: clk-24M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc32k: clk-32k {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> +
> + fake100M: clk-100M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <100000000>;
> + clock-output-names = "fake-100M";
> + };
> + };
> +
> + cpus {
> + #address-cells = <0>;
> + #size-cells = <0>;
> +
> + cpu {
> + compatible = "arm,arm926ej-s";
> + device_type = "cpu";
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + sram-controller@1c00000 {
> + compatible = "allwinner,sun4i-a10-sram-controller";
> + reg = <0x01c00000 0x30>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + sram_d: sram@10000 {
> + compatible = "mmio-sram";
> + reg = <0x00010000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x00010000 0x1000>;
> +
> + otg_sram: sram-section@0 {
> + compatible =
> "allwinner,sun4i-a10-sram-d";
> + reg = <0x0000 0x1000>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + spi0: spi@1c05000 {
> + compatible = "allwinner,suniv-spi",
> + "allwinner,sun8i-h3-spi";
> + reg = <0x01c05000 0x1000>;
> + interrupts = <10>;
> + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
> + clock-names = "ahb", "mod";
> + resets = <&ccu RST_BUS_SPI0>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc0: mmc@1c0f000 {
> + compatible = "allwinner,sun4i-a10-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> + clock-names = "ahb", "mmc";
> + interrupts = <32>;
> + resets = <&ccu RST_BUS_MMC0>;
> + reset-names = "ahb";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ccu: clock@1c20000 {
> + compatible = "allwinner,suniv-ccu";
> + reg = <0x01c20000 0x400>;
> + clocks = <&osc24M>, <&osc32k>;
> + clock-names = "hosc", "losc";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + intc: interrupt-controller@1c20400 {
> + compatible = "allwinner,suniv-ic";
> + reg = <0x01c20400 0x400>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + pio: pinctrl@1c20800 {
> + compatible = "allwinner,suniv-pinctrl";
> + reg = <0x01c20800 0x400>;
> + interrupts = <38>, <39>, <40>;
> + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> + clock-names = "apb", "hosc", "losc";
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #gpio-cells = <3>;
> +
> + spi0_pins_a: spi0-pins-pc {
> + pins = "PC0", "PC1", "PC2", "PC3";
> + function = "spi0";
> + };
> +
> + uart0_pins_a: uart-pins-pe {
> + pins = "PE0", "PE1";
> + function = "uart0";
> + };
> +
> + mmc0_pins: mmc0-pins {
> + pins = "PF0", "PF1", "PF2",
> + "PF3", "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> + };
> +
> + timer@1c20c00 {
> + compatible = "allwinner,sun4i-a10-timer";
> + reg = <0x01c20c00 0x90>;
> + interrupts = <13>;
> + clocks = <&osc24M>;
> + };
> +
> + wdt: watchdog@1c20ca0 {
> + compatible = "allwinner,sun6i-a31-wdt";
> + reg = <0x01c20ca0 0x20>;
> + };
> +
> + uart0: serial@1c25000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c25000 0x400>;
> + interrupts = <1>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART0>;
> + resets = <&ccu RST_BUS_UART0>;
> + status = "disabled";
> + };
> +
> + uart1: serial@1c25400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c25400 0x400>;
> + interrupts = <2>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART1>;
> + resets = <&ccu RST_BUS_UART1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@1c25800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c25800 0x400>;
> + interrupts = <3>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&ccu CLK_BUS_UART2>;
> + resets = <&ccu RST_BUS_UART2>;
> + status = "disabled";
> + };
> +
> + usb_otg: usb@1c13000 {
> + compatible = "allwinner,suniv-musb";
> + reg = <0x01c13000 0x0400>;
> + clocks = <&ccu CLK_BUS_OTG>;
> + resets = <&ccu RST_BUS_OTG>;
> + interrupts = <26>;
> + interrupt-names = "mc";
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + extcon = <&usbphy 0>;
> + allwinner,sram = <&otg_sram 1>;
> + status = "disabled";
> + };
> +
> + usbphy: phy@1c13400 {
> + compatible = "allwinner,suniv-usb-phy";
> + reg = <0x01c13400 0x10>;
> + reg-names = "phy_ctrl";
> + clocks = <&ccu CLK_USB_PHY0>;
> + clock-names = "usb0_phy";
> + resets = <&ccu RST_USB_PHY0>;
> + reset-names = "usb0_reset";
> + #phy-cells = <1>;
> + status = "disabled";
> + };
> + };
> +};
