On Mon, 8 Feb 2021 20:14:26 +
Chris Packham wrote:
> On 9/02/21 8:15 am, Marek Behun wrote:
> > This patch is needed on some Turris Omnia boards with Samsung DDR chips,
> > otherwise DDR training fails in ~60% of cases.
> >
> > Marvell send us this patch for testing, I have updated it a littl
On Sun, Feb 07, 2021 at 09:10:43PM +0100, Marek Vasut wrote:
> The following changes since commit 8308a28af821d6498186b3dd7463db9874cd2daf:
>
> Merge tag 'ti-v2021.04-rc2' of
> https://gitlab.denx.de/u-boot/custodians/u-boot-ti (2021-02-05 09:39:31
> -0500)
>
> are available in the Git reposit
On Sun, Feb 07, 2021 at 09:41:32PM +0100, Marek Vasut wrote:
> The following changes since commit 3936fd998668846f77468d8f6a662e906920969c:
>
> Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2021-02-06
> 09:45:58 -0500)
>
> are available in the Git repository at:
>
> git://git.d
On Mon, Feb 08, 2021 at 11:10:09AM +, Priyanka Jain wrote:
> Dear Tom,
>
> Please find my pull-request for u-boot-fsl-qoriq/master
> https://github.com/u-boot/u-boot/pull/52/checks
>
> Summary
> Layerscape: Enable gpio
> Bug fixes & updates related to dspi, qspi, pciep, SVR mask,
> stream-i
On Mon, Feb 08, 2021 at 12:41:45PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the 2nd batch of Marvell MVEBU related patches. Here the
> summary log:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On 2/7/21 8:37 AM, Simon Glass wrote:
Hi Alexandru,
On Thu, 4 Feb 2021 at 12:56, Alexandru Gagniuc wrote:
The purpose of this change is to allow configuring TrustZone (TZC)
memory permissions. For example, OP-TEE expects TZC regions to be
configured in a very particular way. The API presented
Hi Stefan,
this patchset continues to address the issue you tried to solve with
commit "pci: pci_mvebu: Disable config access to PCI host bridge ports".
Some code refactoring is done here so that the code looks more sane and
the underlying information is documenter.
The last patch changes the lo
PCI uclass maps PCI bus numbers to the seq member of struct udevice.
Use dev_seq(dev) as the bus number in mvebu_pcie_probe instead of an
incrementing a static variable.
Signed-off-by: Marek Behún
Cc: Stefan Roese
Cc: Phil Sutter
Cc: Mario Six
Cc: Baruch Siach
---
drivers/pci/pci_mvebu.c | 4
Linux displays the real PCIe card connected to a mvebu PCIe slot as
device 0, not 1. This is done by setting local dev number to 1, so that
the local "Marvell Memory controller" device is on address 1.
Let's do it also in U-Boot.
With this commit the pci command in U-Boot prints something like:
Write bdf address in a same way in mvebu_pcie_read/write_config.
Signed-off-by: Marek Behún
Cc: Stefan Roese
Cc: Phil Sutter
Cc: Mario Six
Cc: Baruch Siach
---
drivers/pci/pci_mvebu.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/pci_mvebu.c b/drive
Other drivers (aardvark, intel_fpga) print "(addr,size,val)" when
debugging is enabled. Print size for pci_mvebu as well.
Signed-off-by: Marek Behún
Cc: Stefan Roese
Cc: Phil Sutter
Cc: Mario Six
Cc: Baruch Siach
---
drivers/pci/pci_mvebu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deleti
Refactor validation of bdf parameter in mvebu_pcie_read/write_config
functions.
We can simplify the code by putting the validation into separate
function.
Also there are always only two devices visible on local bus:
* on slot configured by function mvebu_pcie_set_local_dev_nr()
(by default this
Reviewed-by: Marek Behún
Reviewed-by: Marek Behún
Reviewed-by: Marek Behún
Reviewed-by: Marek Behún
UEFI test files like helloworld.efi require an architecture specific
PE-COFF header.
For non-sandbox the PE-COFF header is chosen by the target architecture.
For the sandbox we use the host architecture. This is not helpful for cross
compiling. Allow specifying the target architecture of the sandb
Stefan,
these patches should probably have a different From: - i.e. the
original authors should be preserved (from the first Signed-off-by
tags), for example:
motib
Baruch Siach
heaterC
But some of these are not full names, so I don't know whether I should
resend this or not.
What do y
On 2/8/21 6:56 PM, Heinrich Schuchardt wrote:
On 2/8/21 6:08 PM, Simon Glass wrote:
HI Marek,
On Mon, 8 Feb 2021 at 09:10, Marek Szyprowski
wrote:
Hi Simon,
On 06.02.2021 17:21, Simon Glass wrote:
On Thu, 4 Feb 2021 at 03:36, Marek Szyprowski
wrote:
...
Could you give me a bit more hints
Hi Jesse,
first of all thank you for helping me with this porting :-)
On 2/8/21 1:24 AM, Jesse Taube wrote:
Add basic driver support for the IMX General Purpose Timer (GPT) available
on almost all i.MX SoCs family.
Giulio Benetti (3):
timer: imx-gpt: Add timer support for i.MX SoCs family
Hi Pali,
> Resended v2 patch series with fixed commit messages
>
> This patch series fix usbtty code (serial console via USB peripheral
> mode), fix underlying musb peripheral code, fix compilation of
> CONFIG_USB_DEVICE (used by usbtty), remove unused Nokia RX-51 code to
> decrease size of U
On 2/8/21 1:52 PM, Jose Marinho wrote:
The ESRT is initialised during efi_init_objlist after
efi_initialize_system_table().
The ESRT is initially created with size for 50 FW image entries.
The ESRT is resized when it runs out of space. Every resize adds 50
additional entries.
The ESRT is populat
Hi Jesse,
On 2/8/21 1:24 AM, Jesse Taube wrote:
This timer driver is using GPT Timer (General Purpose Timer) available
on almost all i.MX SoCs family.
Signed-off-by: Giulio Benetti
Cc: Stefano Babic
Cc: Giulio Benetti
Cc: Jesse Taube
All these ^^^ Cc in commit log are useless in this case
On Monday 08 February 2021 23:15:33 Lukasz Majewski wrote:
> Hi Pali,
>
> > Resended v2 patch series with fixed commit messages
> >
> > This patch series fix usbtty code (serial console via USB peripheral
> > mode), fix underlying musb peripheral code, fix compilation of
> > CONFIG_USB_DEVICE
Subject should be:
ARM: dts: imxrt1050: add gpt1 node
Please try to:
# git log arch/arm/dts/imxrt1050.dtsi
this is to see the form already used to begin commit.
In general, try to imitate what others do in commited patches.
Best regards
--
Giulio Benetti
Benetti Engineering sas
On 2/8/21 1:24 A
On 2/8/21 11:18 PM, Heinrich Schuchardt wrote:
On 2/8/21 1:52 PM, Jose Marinho wrote:
The ESRT is initialised during efi_init_objlist after
efi_initialize_system_table().
The ESRT is initially created with size for 50 FW image entries.
The ESRT is resized when it runs out of space. Every resize
On Monday 08 February 2021 23:21:38 Pali Rohár wrote:
> On Monday 08 February 2021 23:15:33 Lukasz Majewski wrote:
> > Hi Pali,
> >
> > > Resended v2 patch series with fixed commit messages
> > >
> > > This patch series fix usbtty code (serial console via USB peripheral
> > > mode), fix under
Hi Jesse,
this patch should have been squashed with patch 1/4 as already suggested.
On 2/8/21 1:24 AM, Jesse Taube wrote:
Signed-off-by: Jesse Taube
Cc: Stefano Babic
Cc: Giulio Benetti
Cc: Jesse Taube
This timer driver is using GPT Timer (General Purpose Timer) available
on almost all i.M
On 2/8/21 11:34 PM, Pali Rohár wrote:
On Monday 08 February 2021 23:21:38 Pali Rohár wrote:
On Monday 08 February 2021 23:15:33 Lukasz Majewski wrote:
Hi Pali,
Resended v2 patch series with fixed commit messages
This patch series fix usbtty code (serial console via USB peripheral
mode),
On Monday 08 February 2021 23:45:37 Marek Vasut wrote:
> On 2/8/21 11:34 PM, Pali Rohár wrote:
> > On Monday 08 February 2021 23:21:38 Pali Rohár wrote:
> > > On Monday 08 February 2021 23:15:33 Lukasz Majewski wrote:
> > > > Hi Pali,
> > > >
> > > > > Resended v2 patch series with fixed comm
Hi Patrick,
On Mon, Feb 8, 2021 at 5:06 PM Patrick DELAUNAY
wrote:
>
> Hi Igor,
>
> On 1/24/21 10:39 AM, Igor Opaniuk wrote:
> > From: Igor Opaniuk
> >
> > Add support for rpmb-dev property in optee node.
> > Prioritize that provided eMMC info from DT for RPMB operations over
> > the one provide
From: Igor Opaniuk
Replace CONFIG_DM_I2C undefs with CONFIG_SPL_DM_I2C for the SPL build
case. This should be moved to appropriate board defconfigs
in the future.
Signed-off-by: Igor Opaniuk
---
(no changes since v1)
include/configs/T104xRDB.h | 2 +-
include/configs/imx8mp_evk.h |
From: Igor Opaniuk
At present if U-Boot proper uses driver model for I2C, then SPL has to
also. While this is desirable, it places a significant barrier to moving
to driver model in some cases. For example, with a space-constrained SPL
it may be necessary to enable CONFIG_SPL_OF_PLATDATA which in
Hi Patrick,
On Mon, 8 Feb 2021 at 11:13, Patrick DELAUNAY
wrote:
>
> Hi Simon,
>
> On 2/5/21 5:22 AM, Simon Glass wrote:
> > Using the internal vs. external pull resistors it is possible to get
> > 27 different combinations from 3 strapping pins. Add an implementation
> > of this.
> >
> > This in
From: Igor Opaniuk
At present if U-Boot proper uses driver model for I2C, then SPL has to
also. While this is desirable, it places a significant barrier to moving
to driver model in some cases. For example, with a space-constrained SPL
it may be necessary to enable CONFIG_SPL_OF_PLATDATA which in
From: Igor Opaniuk
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD
On 9/02/21 9:18 am, Marek Behun wrote:
> On Mon, 8 Feb 2021 20:11:06 +
> Chris Packham wrote:
>
>> Hi Marek,
>>
>> Do you have this in a repo I can pull from? I've got a couple of boards
>> I can give this a spin on.
> https://gitlab.nic.cz/turris/turris-omnia-uboot/
> branch v2021.04-rc-mv-dd
On 9/02/21 1:16 pm, Chris Packham wrote:
> On 9/02/21 9:18 am, Marek Behun wrote:
>> On Mon, 8 Feb 2021 20:11:06 +
>> Chris Packham wrote:
>>
>>> Hi Marek,
>>>
>>> Do you have this in a repo I can pull from? I've got a couple of boards
>>> I can give this a spin on.
>> https://gitlab.nic.cz/t
On Sun, 7 Feb 2021 23:57:20 -0600
Samuel Holland wrote:
> The XHCI controller has its own clock and reset. Add them.
>
> Signed-off-by: Samuel Holland
Checked against the manual:
Reviewed-by: Andre Przywara
Cheers,
Andre
> ---
> drivers/clk/sunxi/clk_h6.c | 2 ++
> 1 file changed, 2 inser
On Sun, 7 Feb 2021 23:57:21 -0600
Samuel Holland wrote:
Hi,
> This driver is needed for XHCI to work on the Allwinner H6 SoC. The
> driver is copied from Linux v5.10.
>
> Signed-off-by: Samuel Holland
Compared against the Linux driver, also against the version I made
myself a few months ago
On Mon, 8 Feb 2021 12:43:52 +0100
Marek Vasut wrote:
(CC:ing Masahiro, Manni and Kever)
> On 2/8/21 6:57 AM, Samuel Holland wrote:
> > Resetting an XHCI controller inside xhci_register undoes any register
> > setup performed by the platform driver. And at least on the Allwinner
> > H6, resetting
On Sun, 7 Feb 2021 23:57:23 -0600
Samuel Holland wrote:
(CC:ing Simon and Kever)
> Some platforms, like the Allwinner H6, do not have a separate glue layer
> around the dwc3. Instead, they rely on the clocks/resets/phys referenced
> from the dwc3 DT node itself. Add support for enabling the clo
On Sun, 7 Feb 2021 23:57:24 -0600
Samuel Holland wrote:
Hi,
(CC:ing Maxime and Chen-Yu)
> Pine H64 and Orange Pi 3 both provide a USB3 type A port.
> Enable it in U-Boot.
>
> Signed-off-by: Samuel Holland
That looks good to me, but the Pine H64 does not enable the USB
3.0 controller in its
On Sun, 7 Feb 2021 23:57:18 -0600
Samuel Holland wrote:
Hi Samuel,
> This series adds clock, PHY, and XHCI driver support for the USB3
> controller found in the Allwinner H6 SoC. Below is a log showing it
> functioning on the Orange Pi 3.
Many thanks for sharing this! The lack of USB 3.0 suppo
On Tue, 9 Feb 2021 01:08:54 +
Chris Packham wrote:
> On 9/02/21 1:16 pm, Chris Packham wrote:
> > On 9/02/21 9:18 am, Marek Behun wrote:
> >> On Mon, 8 Feb 2021 20:11:06 +
> >> Chris Packham wrote:
> >>
> >>> Hi Marek,
> >>>
> >>> Do you have this in a repo I can pull from? I've got
On 9/02/21 3:07 pm, Marek Behun wrote:
> On Tue, 9 Feb 2021 01:08:54 +
> Chris Packham wrote:
>
>> On 9/02/21 1:16 pm, Chris Packham wrote:
>>> On 9/02/21 9:18 am, Marek Behun wrote:
On Mon, 8 Feb 2021 20:11:06 +
Chris Packham wrote:
> Hi Marek,
>
> Do you ha
On Tue, Feb 09, 2021 at 01:37:54AM +0200, Igor Opaniuk wrote:
> From: Igor Opaniuk
>
> Replace CONFIG_DM_I2C undefs with CONFIG_SPL_DM_I2C for the SPL build
> case. This should be moved to appropriate board defconfigs
> in the future.
>
> Signed-off-by: Igor Opaniuk
> ---
>
> (no changes sinc
On 2/8/21 5:43 AM, Marek Vasut wrote:
> On 2/8/21 6:57 AM, Samuel Holland wrote:
>> Resetting an XHCI controller inside xhci_register undoes any register
>> setup performed by the platform driver. And at least on the Allwinner
>> H6, resetting the XHCI controller also resets the PHY, which prevents
On 2/8/21 8:27 PM, Samuel Holland wrote:
> On 2/8/21 5:43 AM, Marek Vasut wrote:
>> On 2/8/21 6:57 AM, Samuel Holland wrote:
>>> Resetting an XHCI controller inside xhci_register undoes any register
>>> setup performed by the platform driver. And at least on the Allwinner
>>> H6, resetting the XHCI
The SPI NOR flash node name in main device tree for Turris Omnia is
called `spi-nor@0`.
Rename node spi-flash@0 in Turris Omnia's -u-boot.dtsi file to spi-nor@0
so that U-Boot does not try to probe the same SPI NOR device multiple
times.
Signed-off-by: Marek Behún
Cc: Stefan Roese
---
arch/arm
Hello,
this patchset adds support for U-Boot to parse MTD partitions from
device-tree, and also improves support for SPI NOR access via the `mtd`
command.
Marek
Cc: Tom Rini
Cc: Dario Binacchi
Cc: Jagan Teki
Cc: Priyanka Jain
Cc: Simon Glass
Cc: Heiko Schocher
Cc: Jagan Teki
Marek Behún
Add functions ofnode_get_addr_size_index_notrans(), which is a
non-translating version of ofnode_get_addr_size_index().
Some addresses are not meant to be translated, for example those of MTD
fixed-partitions.
Signed-off-by: Marek Behún
Cc: Dario Binacchi
Cc: Simon Glass
---
drivers/core/ofno
Currently when the SPI_FLASH_MTD config option is enabled, only one SPI
can be registered as MTD at any time - it is the last one probed (since
with old non-DM model only one SPI NOR could be probed at any time).
When DM is enabled, allow for registering multiple SPI NORs as MTDs by
utilizing the
Add support for parsing partitions defined in device-trees via the
`partitions` node with `fixed-partitions` compatible.
The `mtdparts`/`mtdids` mechanism takes precedence. If some partitions
are defined for a MTD device via this mechanism, the code won't register
partitions for that MTD device fr
In order for `mtd list` U-Boot command to list SPI NOR devices without
the need to run `sf probe` before, we have to probe SPI NOR devices in
mtd_probe_devices().
Signed-off-by: Marek Behún
Cc: Jagan Teki
Cc: Priyanka Jain
Cc: Simon Glass
Cc: Heiko Schocher
Cc: Jagan Teki
---
drivers/mtd/mt
Fill in mtd->dev member with nor->dev.
This can be used by MTD OF partition parser.
Signed-off-by: Marek Behún
Cc: Jagan Teki
Cc: Priyanka Jain
Cc: Simon Glass
Cc: Heiko Schocher
Cc: Jagan Teki
---
drivers/mtd/spi/sf_mtd.c | 1 +
drivers/mtd/spi/spi-nor-core.c | 1 +
drivers/mtd/spi/
The device_probe() function does the same thing as mtd_probe() and
mtd_probe() is only used in mtd_probe_uclass_mtd_devs(), where the
probing can be made simpler by using uclass_foreach_dev_probe macro.
Signed-off-by: Marek Behún
Cc: Jagan Teki
Cc: Priyanka Jain
Cc: Simon Glass
Cc: Heiko Schoc
On 2/8/21 7:42 PM, Andre Przywara wrote:
> On Sun, 7 Feb 2021 23:57:23 -0600
> Samuel Holland wrote:
>
> (CC:ing Simon and Kever)
>
>> Some platforms, like the Allwinner H6, do not have a separate glue layer
>> around the dwc3. Instead, they rely on the clocks/resets/phys referenced
>> from the
Add support for stack protector for UBOOT, SPL, and TPL
as well as new pytest for stackprotector
Signed-off-by: Joel Peshkin
---
Cc: Simon Glass
Cc: Heinrich Schuchardt
Changes for v9:
- Fix pytest script post-test reboot
Changes for v8:
- Fix commit message
- Force canary to UL type
Hi Heinrich,
On Mon, 8 Feb 2021 at 15:18, Heinrich Schuchardt wrote:
>
> On 2/8/21 6:56 PM, Heinrich Schuchardt wrote:
> > On 2/8/21 6:08 PM, Simon Glass wrote:
> >> HI Marek,
> >>
> >> On Mon, 8 Feb 2021 at 09:10, Marek Szyprowski
> >> wrote:
> >>>
> >>> Hi Simon,
> >>>
> >>> On 06.02.2021 17:2
Hi Patrick,
On Mon, 8 Feb 2021 at 10:33, Patrick DELAUNAY
wrote:
>
> Hi Simon,
>
> 2 minor remarks,
>
> On 2/5/21 5:22 AM, Simon Glass wrote:
> > It is convenient to be able to adjust some of the flags for a GPIO while
> > leaving others alone. Add a function for this.
> >
> > Update dm_gpio_set_
Hi Stefano.
On Thu, 28 Jan 2021 at 02:24, Stefano Babic wrote:
>
> Hi Simon,
>
> On 27.01.21 22:31, Simon Glass wrote:
> > Hi Stefano,
> >
> > Thank you for the offer!
> >
> > What are the advantages of hosting the meeting on a private server?
>
> No, I do not see any special advantage - I will j
Hi Heinrich,
On Mon, 8 Feb 2021 at 15:06, Heinrich Schuchardt wrote:
>
> UEFI test files like helloworld.efi require an architecture specific
> PE-COFF header.
architecture-specific
>
> For non-sandbox the PE-COFF header is chosen by the target architecture.
> For the sandbox we use the host ar
Hi Marek,
On Mon, 8 Feb 2021 at 19:49, Marek Behún wrote:
>
> Add functions ofnode_get_addr_size_index_notrans(), which is a
> non-translating version of ofnode_get_addr_size_index().
>
> Some addresses are not meant to be translated, for example those of MTD
> fixed-partitions.
>
> Signed-off-by
From: Bharat Gooty
Add tuning functionality which is needed for HS200 mode.
For HS200, program the correct needed 1.8 voltage
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
---
drivers/mmc/iproc_sdhci.c | 88 +++
1 file changed, 79 insertion
On Mon, Feb 08, 2021 at 09:29:43PM -0700, Simon Glass wrote:
> Hi Heinrich,
>
> On Mon, 8 Feb 2021 at 15:06, Heinrich Schuchardt wrote:
> >
> > UEFI test files like helloworld.efi require an architecture specific
> > PE-COFF header.
>
> architecture-specific
>
> >
> > For non-sandbox the PE-COF
Hi Pratyush,
On 1/30/2021 3:08 AM, Pratyush Yadav wrote:
> On 28/01/21 01:36PM, tkuw584...@gmail.com wrote:
>> From: Takahiro Kuwano
>>
>> The S25HL-T/S25HS-T family is the Cypress Semper Flash with Quad SPI.
>> The datasheets can be found in the following links.
>>
>> https://www.cypress.com/fil
On 1/30/2021 3:17 AM, Pratyush Yadav wrote:
> On 28/01/21 01:36PM, tkuw584...@gmail.com wrote:
>> From: Takahiro Kuwano
>>
>> Some of Spansion/Cypress chips support Read/Write Any Register commands.
>> These commands are mainly used to write volatile registers and access to
>> the registers in
Hi Pratyush,
On 1/30/2021 3:40 AM, Pratyush Yadav wrote:
> Hi,
>
> On 28/01/21 01:36PM, tkuw584...@gmail.com wrote:
>> From: Takahiro Kuwano
>>
>> Some of Spansion/Cypress chips support volatile version of configuration
>> registers and it is recommended to update volatile registers in the field
Hi Pratyush,
Thank you for the feedback. I will address this in v5.
On 1/30/2021 3:49 AM, Pratyush Yadav wrote:
> Hi,
>
> On 28/01/21 01:36PM, tkuw584...@gmail.com wrote:
>> From: Takahiro Kuwano
>>
>> For dual/quad die package devices from Spansion/Cypress, the device's
>> status needs to be c
Am 9. Februar 2021 05:29:43 MEZ schrieb Simon Glass :
>Hi Heinrich,
>
>On Mon, 8 Feb 2021 at 15:06, Heinrich Schuchardt
>wrote:
>>
>> UEFI test files like helloworld.efi require an architecture specific
>> PE-COFF header.
>
>architecture-specific
>
>>
>> For non-sandbox the PE-COFF header is chose
Am 9. Februar 2021 06:30:31 MEZ schrieb AKASHI Takahiro
:
>On Mon, Feb 08, 2021 at 09:29:43PM -0700, Simon Glass wrote:
>> Hi Heinrich,
>>
>> On Mon, 8 Feb 2021 at 15:06, Heinrich Schuchardt
>wrote:
>> >
>> > UEFI test files like helloworld.efi require an architecture
>specific
>> > PE-COFF head
Am 9. Februar 2021 07:19:48 MEZ schrieb Asherah Connor :
>PE section table entries' SizeOfRawData must be a multiple of
>FileAlignment, and thus may be rounded up and larger than their
>VirtualSize.
>
>We should not load beyond the VirtualSize, which is "the total size of
>the section when loaded i
On 9/02/21 3:07 pm, Marek Behun wrote:
> On Tue, 9 Feb 2021 01:08:54 +
> Chris Packham wrote:
>
>> On 9/02/21 1:16 pm, Chris Packham wrote:
>>> On 9/02/21 9:18 am, Marek Behun wrote:
On Mon, 8 Feb 2021 20:11:06 +
Chris Packham wrote:
> Hi Marek,
>
> Do you h
Hello Patrick,
On 08.02.21 17:56, Patrick DELAUNAY wrote:
> Hi Heiko,
>
>
> On 2/8/21 12:38 PM, Heiko Schocher wrote:
>> add support for the UUU commands ACmd and UCmd.
>>
>> Enable them through the Kconfig option
>> CONFIG_FASTBOOT_UUU_SUPPORT
>>
>> base was commit in NXP kernel
>> 9b149c2a2882
Hi Tom,
I have tested this patch with Aspeed SDK as well as the U-Boot mainline
codebase on AST2500/AST2600 EVBs.
Both AST2500/AST2600 can boot to kernel normally. Thanks.
Chiawei
Tested-by: Chia-Wei Wang
> -Original Message-
> From: Tom Rini
> Sent: Thursday, February 4, 2021 10:24
On 2/9/21 7:48 AM, Heinrich Schuchardt wrote:
Am 9. Februar 2021 07:19:48 MEZ schrieb Asherah Connor :
PE section table entries' SizeOfRawData must be a multiple of
FileAlignment, and thus may be rounded up and larger than their
VirtualSize.
We should not load beyond the VirtualSize, which is "
There is no need to clear reset reason register because it is protected by
PMUFW already which is reported when verbose log is enabled as:
pm_core.c@733 APU> No write permission to 0xFF5E0220
Signed-off-by: Michal Simek
---
board/xilinx/zynqmp/zynqmp.c | 6 +-
1 file changed, 1 insertion(+)
101 - 178 of 178 matches
Mail list logo
