> Subject: [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support
> eMMC's boot0 SPL update
>
> The TPC70 can boot from eMMC's boot0. This patch allows it to update this
> HW partition's SPL.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> include/configs/kp_imx6q_tpc.h | 5 +
>
> Subject: [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish
> between eMMC and SD boot
>
> The TPC70 can boot from SD card (debug/development) and eMMC
> (production).
> The board_boot_order() function provides a run time check for the device
> from which one wants to boot (it is
> Subject: [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers
> when setting ENET clock
>
> This is a cosmetic change, just to use proper define instead of magic numbers.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 3 ++-
> 1 file changed, 2 i
> Subject: [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to
> Makefile for DTB compilation
>
> This commit is necessary to fix following error:
>
> Device Tree Source is not correctly specified.
> Please define 'CONFIG_DEFAULT_DEVICE_TREE'
> or build with 'DEVICE_TREE=' argument
>
> Subject: [PATCH v2 06/11] imx: tpc70: led: Enable LED default state
>
> This change sets the default state of LEDs on TPC70.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 4
> 1 file changed, 4 insertions(+)
>
> diff --git a/board/k+p/kp_imx6q_tpc
> Subject: [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based)
> device tree description
>
> This commit defines the TPC70 imx6q board with device tree description.
Is the imx6q-kp.dtsi usable for this board from Linux kernel?
Regards,
Peng.
>
> Signed-off-by: Lukasz Majewski
> --
> Subject: [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related
> properties from DTS
>
> Those properties will be reused in the SPL to provide proper clock setting.
>
> Signed-off-by: Lukasz Majewski
> ---
>
> configs/kp_imx6q_tpc_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1
/567879982
Thanks,
- Kever
The following changes since commit d0d07ba86afc8074d79e436b1ba4478fa0f0c1b5:
Prepare v2019.10-rc1 (2019-07-29 21:16:16 -0400)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git
tags/u-boot-rockchip-20190809
for
Configure stream IDs for integrated PCI devices. There are hardware
defaults but unfortunately they are outside the acceptable range for
SMMU, so we need to tune them down. Use values based on Linux device tree
iommu-map or, if missing, start from HW base value shifted down by 4.
Signed-off-by:
V3:
2/4: Fix RST/BYPASS seq issue to avoid glitch
4/4: ARM clk not use 24M for switch, use pll2_500m Add R-b/A-b tag
Fix pll gate shift bit.
V2:
2/4: fix MASK/SHIFT usage
This is to support i.MX8MM clk driver.
i.MX8MM use similar clock design as i.MX7D, but it has use
different PLL, so
Add Kconfig entry for i.MX8MM
Signed-off-by: Peng Fan
---
drivers/clk/Kconfig | 4 ++--
drivers/clk/imx/Kconfig | 16
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a3f0171b45..fce595b4b3 100644
--- a/drivers/
Add pll14xx driver
Signed-off-by: Peng Fan
---
drivers/clk/imx/clk-pll14xx.c | 381 ++
drivers/clk/imx/clk.h | 25 +++
2 files changed, 406 insertions(+)
create mode 100644 drivers/clk/imx/clk-pll14xx.c
diff --git a/drivers/clk/imx/clk-pll14xx.c
Import i.MX8M composite clk from Linux Kernel 5.3.0-rc2
Signed-off-by: Peng Fan
---
drivers/clk/imx/clk-composite-8m.c | 170 +
1 file changed, 170 insertions(+)
create mode 100644 drivers/clk/imx/clk-composite-8m.c
diff --git a/drivers/clk/imx/clk-composite
Add i.MX8MM clk driver support.
Signed-off-by: Peng Fan
---
drivers/clk/imx/Makefile | 2 +
drivers/clk/imx/clk-imx8mm.c | 415 +++
2 files changed, 417 insertions(+)
create mode 100644 drivers/clk/imx/clk-imx8mm.c
diff --git a/drivers/clk/imx/Make
> Sync kernel dts for i.MX6ULL from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan
> ---
>
> V2:
> None
>
> arch/arm/dts/imx6ull-14x14-evk.dts | 523 +---
> arch/arm/dts/imx6
> Import kernel dts for i.MX6ULZ from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan
> ---
>
> V2:
> None
>
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/imx6ulz.dtsi | 37 +
> Add i.MX6ULZ cpu type and helper.
>
> Signed-off-by: Peng Fan
> ---
>
> V2:
> None
>
> arch/arm/include/asm/arch-imx/cpu.h | 1 +
> arch/arm/include/asm/mach-imx/sys_proto.h | 1 +
> arch/arm/mach-imx/cpu.c | 2 ++
> arch/arm/mach-imx/mx6/soc.c | 4
> Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
> with i.MX6ULL. so most code of i.MX6ULL can be reused
> by i.MX6ULZ.
>
> Signed-off-by: Peng Fan
> ---
>
> V2:
> Add entry in MAINTAINERS
>
> arch/arm/dts/imx6ulz-14x14-evk.dts| 22 ++
> board/freescale/mx6ullev
> Add Kconfig entry for i.MX8MM
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/Kconfig | 4 ++--
> drivers/clk/imx/Kconfig | 16
> 2 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index a3f0171b45..fce595b4b3 1
On 07.08.19 15:01, Marek Behún wrote:
The non-DM version of this driver used to set BAR0 register after the
calls to pci_set_region.
I found out that for some strange reason the ath10k driver in kernel
fails to work if this is done the other way around.
I know that Linux's driver should not depen
On Tue, Jun 11, 2019 at 8:30 AM Ley Foon Tan wrote:
>
> On Fri, May 24, 2019 at 10:30 AM Ley Foon Tan wrote:
> >
> > This patchset fix issues in Intel FPGA PCIe driver.
> > - Fix TLP polling timeout
> > - Fix enumerating mult-function PCIe device issue
> > - Fix PCIe switch read config register i
> Add pll14xx driver
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/imx/clk-pll14xx.c | 381
> ++
> drivers/clk/imx/clk.h | 25 +++
> 2 files changed, 406 insertions(+)
> create mode 100644 drivers/clk/imx/clk-pll14xx.c
>
> diff --git a/driver
> Import i.MX8M composite clk from Linux Kernel 5.3.0-rc2
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/imx/clk-composite-8m.c | 170
> +
> 1 file changed, 170 insertions(+)
> create mode 100644 drivers/clk/imx/clk-composite-8m.c
>
> diff --git a/drivers/
> Add i.MX8MM clk driver support.
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/imx/Makefile | 2 +
> drivers/clk/imx/clk-imx8mm.c | 415
> +++
> 2 files changed, 417 insertions(+)
> create mode 100644 drivers/clk/imx/clk-imx8mm.c
>
> diff --git
> Subject: [PATCH] mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT
> is selected
>
> Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being
> done for the U-boot case.
>
> Signed-off-by: Faiz Abbas
> ---
> drivers/mmc/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff -
> Subject: [PATCH] mmc: zynq_sdhci: fix uninitialized pointer deref on probe
>
> Since commit 3d296365e4e8 ("mmc: sdhci: Add support for
> sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field.
> Move the mmc field initialization before sdhci_setup_cfg() call to avoid crash
> on
> Subject: [PATCH] test/py: Fix MMC/SD block write test dependency
>
> Test is using random command which has own Kconfig symbol CMD_RANDOM
> which already depends on CMD_MEMORY. That's why replace cmd_memory
> by cmd_random.
>
> Fixes: 09da18deab8b ("test/py: add MMC/SD block write test")
> Sign
> Subject: [PATCH 1/7] mmc: atmel_sdhci: fix uninitialized pointer deref on
> probe
>
> Commit 3d296365e4e8 ("mmc: sdhci: Add support for
> sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc field.
>
> Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
> Cc: Faiz
Hi Tom,
Please pull u-boot-mmc tree, update:
mmc test fix
sdhci driver fix
CI: https://travis-ci.org/MrVan/u-boot/builds/569664807
Thanks,
Peng.
The following changes since commit fef408679b2f634ebfd6298d9fc99db99e60fb1d:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell (2019-
Hi Alex,
On Fri, Aug 9, 2019 at 3:59 PM Alex Marginean
wrote:
>
> Configure stream IDs for integrated PCI devices. There are hardware
> defaults but unfortunately they are outside the acceptable range for
> SMMU, so we need to tune them down. Use values based on Linux device tree
> iommu-map or
Hi Harald,
On Thu, Aug 8, 2019 at 7:21 PM Harald Seiler wrote:
>
> Hi Heinrich,
>
> On Wed, 2019-08-07 at 21:26 +0200, Heinrich Schuchardt wrote:
> > Hello Harald,
> >
> > Tom suggested you could help on this issue.
> >
> > I suggest that the pipeline status should be public on all custodian
> >
From: Marcel Ziswiler
Support the V1.2 hardware revision with the following pin muxing
changes:
Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.
Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable sign
Hi Tom,
On Fri, Aug 9, 2019 at 1:22 PM Igor Opaniuk wrote:
>
> From: Marcel Ziswiler
>
> Support the V1.2 hardware revision with the following pin muxing
> changes:
>
> Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
> are now used as DDC pins.
>
> Gen2_i2c_scl_pt5 and gen2
On 8/9/19 12:20 PM, Bin Meng wrote:
Hi Harald,
On Thu, Aug 8, 2019 at 7:21 PM Harald Seiler wrote:
Hi Heinrich,
On Wed, 2019-08-07 at 21:26 +0200, Heinrich Schuchardt wrote:
Hello Harald,
Tom suggested you could help on this issue.
I suggest that the pipeline status should be public on al
As android_image.h uses types like u32, we need to include corresponding
headers in place. Otherwise the user will be forced to include those in
C file, or next build error can occur:
include/android_image.h:32:5: error: unknown type name 'u32'
u32 kernel_size; /* size in bytes */
In
Add optional parameter to 'avb verify' sub-command, so that user is able
to specify which slot to use, in case when user's partitions are
slotted. If that parameter is omitted, the behavior of 'avb verify' will
be the same as before, so user API is content.
Signed-off-by: Sam Protsenko
---
cmd/a
Hi Bin,
On 8/9/2019 12:58 PM, Bin Meng wrote:
Hi Alex,
On Fri, Aug 9, 2019 at 3:59 PM Alex Marginean
wrote:
Configure stream IDs for integrated PCI devices. There are hardware
defaults but unfortunately they are outside the acceptable range for
SMMU, so we need to tune them down. Use value
On 8/8/2019 7:45 PM, Alex Marginean wrote:
MDI pins up to the RJ45 connector may be reversed on the board and the
default PHY configuration applied by firmware may or may not match that.
Add an optional DT property to configure MDI reversal for this case.
Signed-off-by: Alex Marginean
---
dri
Hi Alex,
On Fri, Aug 9, 2019 at 9:15 PM Alex Marginean wrote:
>
> Hi Bin,
>
> On 8/9/2019 12:58 PM, Bin Meng wrote:
> > Hi Alex,
> >
> > On Fri, Aug 9, 2019 at 3:59 PM Alex Marginean
> > wrote:
> >>
> >> Configure stream IDs for integrated PCI devices. There are hardware
> >> defaults but unfor
On 8/9/2019 4:27 PM, Bin Meng wrote:
Hi Alex,
On Fri, Aug 9, 2019 at 9:15 PM Alex Marginean wrote:
Hi Bin,
On 8/9/2019 12:58 PM, Bin Meng wrote:
Hi Alex,
On Fri, Aug 9, 2019 at 3:59 PM Alex Marginean
wrote:
Configure stream IDs for integrated PCI devices. There are hardware
defaults bu
On Fri, Aug 09, 2019 at 05:04:43PM +0800, Ley Foon Tan wrote:
> On Tue, Jun 11, 2019 at 8:30 AM Ley Foon Tan wrote:
> >
> > On Fri, May 24, 2019 at 10:30 AM Ley Foon Tan
> > wrote:
> > >
> > > This patchset fix issues in Intel FPGA PCIe driver.
> > > - Fix TLP polling timeout
> > > - Fix enumera
Hello,
I’m trying to get u-boot 2019.04 to execute the Linux 4.19.55 kernel from
u-boot on a generic Core i5 with 8 GB RAM and having issues. The kernel that
I’m trying to boot will boot fine from GRUB so I know it works but starting
from u-boot just shows “Starting kernel” and the system appe
> Sync kernel dts for i.MX6UL from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan
> ---
>
> V2:
> None
>
> arch/arm/dts/imx6ul-14x14-evk.dts| 422 +---
> arch/a
Original commit c61d94d86035 ("pxe: implement fdtdir extlinux.conf tag")
states, that if FDT file cannot be retrieved then FDT packaged in
firmware should be used.
If FDT file cannot be retrieved and it is specified explicitly using
FDT keyword then the label is skipped. If it cannot be found in
F
+Simon, Andy,
Hi Ryan,
On Fri, Aug 9, 2019 at 11:52 PM Ryan Wilkins wrote:
>
> Hello,
>
> I’m trying to get u-boot 2019.04 to execute the Linux 4.19.55 kernel from
> u-boot on a generic Core i5 with 8 GB RAM and having issues. The kernel that
> I’m trying to boot will boot fine from GRUB so I
-0400)
>
> are available in the Git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip.git
> tags/u-boot-rockchip-20190809
>
> for you to fetch changes up to 6a452e5bd33cf8f4e851445f29ab94b66485700a:
>
> doc: rockchip: Adapt Pine64 Rock64
On Fri, Aug 09, 2019 at 09:38:21AM +, Peng Fan wrote:
> Hi Tom,
>
> Please pull u-boot-mmc tree, update:
> mmc test fix
> sdhci driver fix
>
> CI: https://travis-ci.org/MrVan/u-boot/builds/569664807
>
> Thanks,
> Peng.
>
> The following changes since commit fef408679b2f634ebfd6298d9fc99d
The requested_partitions[] array should contain only boot partitions.
Usually it's only 'boot' partition, as can be seen in [1]. Also, seems
like the requested_partitions[] are only used when there is no 'vbmeta'
partition [2], which is not a regular use-case.
Make requested_partitions[] contain o
On Thu, Aug 8, 2019 at 6:55 AM Peng Fan wrote:
>
> Sync kernel dts for i.MX6UL from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
Just a nit: I find it more readable when the version is stated like
5.2.8, 5.3-rc3, etc.
On Thu, Aug 8, 2019 at 6:55 AM Peng Fan wrote:
>
> Sync kernel dts for i.MX6ULL from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan
Reviewed-by: Fabio Estevam
___
On Thu, Aug 8, 2019 at 6:55 AM Peng Fan wrote:
>
> Add i.MX6ULZ cpu type and helper.
>
> Signed-off-by: Peng Fan
Reviewed-by: Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Thu, Aug 8, 2019 at 6:55 AM Peng Fan wrote:
>
> Import kernel dts for i.MX6ULZ from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan
Reviewed-by: Fabio Estevam
_
On Thu, Aug 8, 2019 at 6:55 AM Peng Fan wrote:
>
> Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
> with i.MX6ULL. so most code of i.MX6ULL can be reused
> by i.MX6ULZ.
>
> Signed-off-by: Peng Fan
Reviewed-by: Fabio Estevam
___
U-Boot maili
On Thu, Aug 8, 2019 at 3:16 PM Alex Marginean wrote:
>
> Hi Joe,
>
> On 7/25/2019 9:41 PM, Joe Hershberger wrote:
> > Hi Alex,
> >
> > https://patchwork.ozlabs.org/patch/1132514/ was applied to
> > http://git.denx.de/?p=u-boot/u-boot-net.git
>
> can you please check this commit (d9a9174), I think
Hi Peng,
On Fri, Aug 9, 2019 at 5:02 AM Peng Fan wrote:
>
> Add Kconfig entry for i.MX8MM
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/Kconfig | 4 ++--
> drivers/clk/imx/Kconfig | 16
> 2 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/Kcon
On Fri, Aug 9, 2019 at 5:02 AM Peng Fan wrote:
>
> Add pll14xx driver
Please expand this commit log a bit by adding in which SoC it is used,
where this driver comes from (Linux, internal U-Boot tree, etc).
___
U-Boot mailing list
U-Boot@lists.denx.de
ht
On Fri, Aug 9, 2019 at 5:02 AM Peng Fan wrote:
> + * The clk are not binded to a dev, because it is part of composite clk
s/binded/bound
> + * use composite clk to get dev
> + */
> +static ulong imx8m_clk_composite_divider_set_rate(struct clk *clk,
> +
Hi Vikas,
On Thu, 8 Aug 2019 at 18:24, Vikas Manocha wrote:
>
> Noncached area at present is being initialized to random space after malloc
> area. It works in most the cases as it goes to stack area & stack is not
> overwriting it being far from it.
Please can you add a motivation for this patc
Hi Heinrich,
On Fri, 9 Aug 2019 at 00:31, Heinrich Schuchardt wrote:
>
> Currently dozens of boards still do not use the driver model for the
> network devices. This makes integration between devices in the UEFI
> sub-system with the U-Boot devices complicated.
>
> See: https://travis-ci.org/xypr
Igor,
-Original Message-
From: Igor Opaniuk
Sent: Friday, August 9, 2019 3:38 AM
To: Tom Warren
Cc: Marcel Ziswiler ; Philippe Schenker
; Oleksandr Suvorov
; Dominik Sliwa ;
Igor Opaniuk ; Albert Aribaud
; Thierry Reding ; U-Boot
Mailing List
Subject: Re: [PATCH v1] apalis-tk1: su
Tom,
Please pull u-boot-tegra/master into U-Boot/master. Thanks!
All Tegra builds are OK on my system, and Igor has verified the Apalis
patches.
The following changes since commit 163bc1e4da425015000dd3f8f128aec994da9586:
Merge tag 'mmc-8-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-
Hi Simon,
> -Original Message-
> From: Simon Glass
> Sent: Friday, August 9, 2019 10:00 AM
> To: Vikas MANOCHA
> Cc: U-Boot Mailing List ; Bin Meng
> ; CITOOLS revi...@lists.codex.cro.st.com>; Mario Six ; Patrick
> DELAUNAY
> Subject: Re: [PATCH] board_f: reserve noncached space below
The time lines set force in doc/driver-model/migration.rst for different
subsystems to move to the driver model have been passed.
I ran a test on Travis CI
https://travis-ci.org/xypron2/u-boot/builds/569776600
that showed only 8 boards remain that cannot be built with CONFIG_DM=y.
H2200
* h2200
Currently we may end up with an LCD clock divider that differs from
the HDMI PHY clock divider if we can't exactly match the pixel clock.
Fix this by using DIV_ROUND_UP to calculate the divider. This works
since the PLL is chosen such that the resulting pixel clock is
never higher than the request
On Fri, Aug 9, 2019 at 5:02 AM Peng Fan wrote:
>
> Add i.MX8MM clk driver support.
>
> Signed-off-by: Peng Fan
> ---
> drivers/clk/imx/Makefile | 2 +
> drivers/clk/imx/clk-imx8mm.c | 415
> +++
> 2 files changed, 417 insertions(+)
> create mode 10
The R8A77980 V3H gether needs a few minor adjustments to the sh_eth
driver, add them to support ethernet on R8A77980.
Signed-off-by: Marek Vasut
Cc: Joe Hershberger
Cc: Nobuhiro Iwamatsu
---
V2: No change
---
drivers/net/sh_eth.c | 15 +++
drivers/net/sh_eth.h | 6 +-
2 files
Import R8A77980 V3H clock tables from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: Use tables from Linux 5.2.y
---
drivers/clk/renesas/Kconfig | 6 +
drivers/clk/renesas/Makefile| 1 +
drivers/clk/renesas/r8a77980-cpg-ms
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: Use DTs from Linux 5.2.y
---
arch/arm/dts/r8a77980-u-boot.dtsi | 24 +
arch/arm/dts/r8a77980.dtsi| 1605 +
inclu
Fix various type warnings when building this driver for 64bit machine.
Signed-off-by: Marek Vasut
Cc: Joe Hershberger
Cc: Nobuhiro Iwamatsu
---
V2: No change
---
drivers/net/sh_eth.c | 24
drivers/net/sh_eth.h | 8
2 files changed, 16 insertions(+), 16 deleti
Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit 5697a9d3d55f.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: Use tables from Linux 5.2.y
---
drivers/pinctrl/renesas/Kconfig| 10 +
drivers/pinctrl/renesas/Makefile |1 +
drivers/pinctrl/renesas/pfc-r8a77980.
Add board code for the R8A77980 V3H Condor board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: Use DTs from Linux 5.2.y
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/r8a77980-condor-u-boot.dts | 34 +++
arch/arm/dts/r8a77980-condor.dts| 292 +
Add a few bits of platform code to support R8A77980 V3H SoC.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
V2: No change
---
arch/arm/mach-rmobile/Kconfig.64 | 5 +
arch/arm/mach-rmobile/cpu_info.c | 1 +
arch/arm/mach-rmobile/include/mach/rmobile.h | 1 +
3 f
On the sandbox provide the relocation offset. This value can be used for
debugging with GDB using the `add-symbol-file u-boot ' command.
Signed-off-by: Heinrich Schuchardt
---
cmd/bdinfo.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 86c17dc427..560c039d3
On 6/24/19 8:49 PM, Simon Glass wrote:
Hi Heinrich,
On Mon, 24 Jun 2019 at 11:36, Heinrich Schuchardt wrote:
On 6/24/19 3:56 PM, Simon Glass wrote:
On Sun, 16 Jun 2019 at 22:44, Heinrich Schuchardt wrote:
Avoid duplicate translation of arrow key codes.
Signed-off-by: Heinrich Schuchardt
> On Aug 9, 2019, at 12:00 PM, Bin Meng wrote:
>
> +Simon, Andy,
>
> Hi Ryan,
>
>> On Fri, Aug 9, 2019 at 11:52 PM Ryan Wilkins
>> wrote:
>>
>> Hello,
>>
>> I’m trying to get u-boot 2019.04 to execute the Linux 4.19.55 kernel from
>> u-boot on a generic Core i5 with 8 GB RAM and having is
On 8/9/19 7:02 PM, Simon Glass wrote:
Hi Heinrich,
On Fri, 9 Aug 2019 at 00:31, Heinrich Schuchardt wrote:
Currently dozens of boards still do not use the driver model for the
network devices. This makes integration between devices in the UEFI
sub-system with the U-Boot devices complicated.
The driver model has been supported for network drivers since 2015. It is
time to convert the remaining boards. Set July 2020 as a timeline.
Signed-off-by: Heinrich Schuchardt
---
Makefile | 11 +++
doc/driver-model/migration.rst | 8
2 files changed, 19 i
Hi Tom,
This PR includes the following changes to x86:
- Enable SD slot on Intel Edison
- Populate CSRT ACPI table for shared DMA controller on Intel Tangier
- Convert Intel ICH-SPI driver to use new spi-mem ops
- Enable config_distro_bootcmd for QEMU x86
- Support U-Boot as a payload for Intel Sl
78 matches
Mail list logo
