> Sync kernel dts for i.MX6ULL from
> commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")
>
> Signed-off-by: Peng Fan <peng....@nxp.com>
> ---
>
> V2:
> None
>
> arch/arm/dts/imx6ull-14x14-evk.dts | 523 +---------------
> arch/arm/dts/imx6ull-pinfunc-snvs.h | 7 +-
> arch/arm/dts/imx6ull-pinfunc.h | 116 ++--
> arch/arm/dts/imx6ull.dtsi | 1184
> ++---------------------------------
> 4 files changed, 127 insertions(+), 1703 deletions(-)
>
> diff --git a/arch/arm/dts/imx6ull-14x14-evk.dts
> b/arch/arm/dts/imx6ull-14x14-evk.dts
> index 9ebcfe1f4e..74aaa8a56a 100644
> --- a/arch/arm/dts/imx6ull-14x14-evk.dts
> +++ b/arch/arm/dts/imx6ull-14x14-evk.dts
> @@ -1,527 +1,18 @@
> -/*
> - * Copyright (C) 2016 Freescale Semiconductor, Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright (C) 2016 Freescale Semiconductor, Inc.
>
> /dts-v1/;
>
> #include "imx6ull.dtsi"
> +#include "imx6ul-14x14-evk.dtsi"
>
> / {
> - model = "Freescale i.MX6 ULL 14x14 EVK Board";
> + model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
> compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
> -
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - memory {
> - reg = <0x80000000 0x20000000>;
> - };
> -
> - backlight {
> - compatible = "pwm-backlight";
> - pwms = <&pwm1 0 5000000>;
> - brightness-levels = <0 4 8 16 32 64 128 255>;
> - default-brightness-level = <6>;
> - status = "okay";
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - reg_can_3v3: regulator@0 {
> - compatible = "regulator-fixed";
> - reg = <0>;
> - regulator-name = "can-3v3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
> - };
> -
> - reg_sd1_vmmc: regulator@1 {
> - compatible = "regulator-fixed";
> - regulator-name = "VSD_3V3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> - reg_gpio_dvfs: regulator-gpio {
> - compatible = "regulator-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_dvfs>;
> - regulator-min-microvolt = <1300000>;
> - regulator-max-microvolt = <1400000>;
> - regulator-name = "gpio_dvfs";
> - regulator-type = "voltage";
> - gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
> - states = <1300000 0x1 1400000 0x0>;
> - };
> - };
> -
> - spi5 {
> - compatible = "spi-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_spi4>;
> - status = "okay";
> - gpio-sck = <&gpio5 11 0>;
> - gpio-mosi = <&gpio5 10 0>;
> - cs-gpios = <&gpio5 7 0>;
> - num-chipselects = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - gpio_spi: gpio_spi@0 {
> - compatible = "fairchild,74hc595";
> - gpio-controller;
> - oe-gpios = <&gpio5 8 0>;
> - #gpio-cells = <2>;
> - reg = <0>;
> - registers-number = <1>;
> - registers-default = /bits/ 8 <0x57>;
> - spi-max-frequency = <100000>;
> - };
> - };
> -};
> -
> -&cpu0 {
> - arm-supply = <®_arm>;
> - soc-supply = <®_soc>;
> - dc-supply = <®_gpio_dvfs>;
> };
>
> &clks {
> - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> - assigned-clock-rates = <786432000>;
> -};
> -
> -&fec1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_enet1>;
> - phy-mode = "rmii";
> - phy-handle = <ðphy0>;
> - status = "okay";
> -};
> -
> -&fec2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_enet2>;
> - phy-mode = "rmii";
> - phy-handle = <ðphy1>;
> - status = "okay";
> -
> - mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ethphy0: ethernet-phy@2 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <2>;
> - };
> -
> - ethphy1: ethernet-phy@1 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <1>;
> - };
> - };
> -};
> -
> -&gpc {
> - fsl,cpu_pupscr_sw2iso = <0x1>;
> - fsl,cpu_pupscr_sw = <0x0>;
> - fsl,cpu_pdnscr_iso2sw = <0x1>;
> - fsl,cpu_pdnscr_iso = <0x1>;
> - fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
> -};
> -
> -&i2c1 {
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c1>;
> - status = "okay";
> -
> - mag3110@0e {
> - compatible = "fsl,mag3110";
> - reg = <0x0e>;
> - position = <2>;
> - };
> -
> - fxls8471@1e {
> - compatible = "fsl,fxls8471";
> - reg = <0x1e>;
> - position = <0>;
> - interrupt-parent = <&gpio5>;
> - interrupts = <0 8>;
> - };
> -};
> -
> -&i2c2 {
> - clock_frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2>;
> - status = "okay";
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog_1>;
> - imx6ul-evk {
> - pinctrl_hog_1: hoggrp-1 {
> - fsl,pins = <
> - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
> /* SD1 CD */
> - MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059
> /* SD1 VSELECT */
> - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059
> /* SD1 RESET */
> - >;
> - };
> -
> - pinctrl_csi1: csi1grp {
> - fsl,pins = <
> - MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
> - MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
> - MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
> - MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
> - MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
> - MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
> - MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
> - MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
> - MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
> - MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
> - MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
> - MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
> - >;
> - };
> -
> - pinctrl_enet1: enet1grp {
> - fsl,pins = <
> - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
> - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
> - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
> - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
> - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1
> 0x4001b031
> - >;
> - };
> -
> - pinctrl_enet2: enet2grp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
> - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
> - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
> - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
> - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
> - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
> - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
> - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
> - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
> - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2
> 0x4001b031
> - >;
> - };
> -
> - pinctrl_flexcan1: flexcan1grp{
> - fsl,pins = <
> - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
> - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
> - >;
> - };
> -
> - pinctrl_flexcan2: flexcan2grp{
> - fsl,pins = <
> - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
> - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
> - >;
> - };
> -
> - pinctrl_i2c1: i2c1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_i2c2: i2c2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> - >;
> - };
> -
> - pinctrl_lcdif_dat: lcdifdatgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> - >;
> - };
> -
> - pinctrl_lcdif_ctrl: lcdifctrlgrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> - >;
> - };
> -
> - pinctrl_pwm1: pwm1grp {
> - fsl,pins = <
> - MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
> - >;
> - };
> -
> - pinctrl_qspi: qspigrp {
> - fsl,pins = <
> - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
> - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
> - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
> - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
> - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
> - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
> - >;
> - };
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins = <
> - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> - >;
> - };
> -
> - pinctrl_uart2: uart2grp {
> - fsl,pins = <
> - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
> - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
> - MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
> - MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
> - >;
> - };
> -
> - pinctrl_uart2dte: uart2dtegrp {
> - fsl,pins = <
> - MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
> - MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
> - MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1
> - MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1
> - >;
> - };
> -
> - pinctrl_usdhc1: usdhc1grp {
> - fsl,pins = <
> - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
> - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> - >;
> - };
> -
> - pinctrl_usdhc2: usdhc2grp {
> - fsl,pins = <
> - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
> - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
> - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
> - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
> - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
> - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
> - >;
> - };
> -
> - pinctrl_wdog: wdoggrp {
> - fsl,pins = <
> - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
> - >;
> - };
> - };
> -};
> -
> -&iomuxc_snvs {
> - pinctrl-names = "default_snvs";
> - pinctrl-0 = <&pinctrl_hog_2>;
> - imx6ul-evk {
> - pinctrl_hog_2: hoggrp-2 {
> - fsl,pins = <
> - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00
> 0x80000000
> - >;
> - };
> -
> - pinctrl_dvfs: dvfsgrp {
> - fsl,pins = <
> - MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79
> - >;
> - };
> -
> - pinctrl_lcdif_reset: lcdifresetgrp {
> - fsl,pins = <
> - /* used for lcd reset */
> - MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
> - >;
> - };
> -
> - pinctrl_spi4: spi4grp {
> - fsl,pins = <
> - MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10
> 0x70a1
> - MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11
> 0x70a1
> - MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07
> 0x70a1
> - MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08
> 0x80000000
> - >;
> - };
> -
> - pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
> - fsl,pins = <
> - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
> - >;
> - };
> - };
> -};
> -
> -
> -&lcdif {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcdif_dat
> - &pinctrl_lcdif_ctrl
> - &pinctrl_lcdif_reset>;
> - display = <&display0>;
> - status = "okay";
> -
> - display0: display {
> - bits-per-pixel = <16>;
> - bus-width = <24>;
> -
> - display-timings {
> - native-mode = <&timing0>;
> - timing0: timing0 {
> - clock-frequency = <9200000>;
> - hactive = <480>;
> - vactive = <272>;
> - hfront-porch = <8>;
> - hback-porch = <4>;
> - hsync-len = <41>;
> - vback-porch = <2>;
> - vfront-porch = <4>;
> - vsync-len = <10>;
> -
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -};
> -
> -&pwm1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pwm1>;
> - status = "okay";
> -};
> -
> -&qspi {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_qspi>;
> - status = "okay";
> - ddrsmp=<0>;
> -
> - flash0: n25q256a@0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - /* compatible = "micron,n25q256a"; */
> - compatible = "jedec,spi-nor";
> - spi-max-frequency = <29000000>;
> - spi-nor,ddr-quad-read-dummy = <6>;
> - reg = <0>;
> - };
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1>;
> - status = "okay";
> -};
> -
> -&uart2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart2>;
> - fsl,uart-has-rtscts;
> - /* for DTE mode, add below change */
> - /* fsl,dte-mode; */
> - /* pinctrl-0 = <&pinctrl_uart2dte>; */
> - status = "okay";
> -};
> -
> -&usbotg1 {
> - dr_mode = "otg";
> - srp-disable;
> - hnp-disable;
> - adp-disable;
> - status = "okay";
> -};
> -
> -&usbotg2 {
> - dr_mode = "host";
> - disable-over-current;
> - status = "okay";
> -};
> -
> -&usbphy1 {
> - tx-d-cal = <0x5>;
> -};
> -
> -&usbphy2 {
> - tx-d-cal = <0x5>;
> -};
> -
> -&usdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc1>;
> - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
> - keep-power-in-suspend;
> - enable-sdio-wakeup;
> - vmmc-supply = <®_sd1_vmmc>;
> - status = "okay";
> -};
> -
> -&usdhc2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usdhc2>;
> - no-1-8-v;
> - non-removable;
> - keep-power-in-suspend;
> - enable-sdio-wakeup;
> - status = "okay";
> -};
> -
> -&wdog1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_wdog>;
> - fsl,wdog_b;
> + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
> + assigned-clock-rates = <320000000>;
> };
> diff --git a/arch/arm/dts/imx6ull-pinfunc-snvs.h
> b/arch/arm/dts/imx6ull-pinfunc-snvs.h
> index da3f412e42..54cfe72295 100644
> --- a/arch/arm/dts/imx6ull-pinfunc-snvs.h
> +++ b/arch/arm/dts/imx6ull-pinfunc-snvs.h
> @@ -1,9 +1,7 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> /*
> * Copyright (C) 2016 Freescale Semiconductor, Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> + * Copyright (C) 2017 NXP
> */
>
> #ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
> @@ -26,4 +24,3 @@
> #define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x002C
> 0x0070 0x0000 0x5 0x0
>
> #endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
> -
> diff --git a/arch/arm/dts/imx6ull-pinfunc.h b/arch/arm/dts/imx6ull-pinfunc.h
> index 7770ed39f6..eb025a9d47 100644
> --- a/arch/arm/dts/imx6ull-pinfunc.h
> +++ b/arch/arm/dts/imx6ull-pinfunc.h
> @@ -1,9 +1,6 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> /*
> * Copyright (C) 2016 Freescale Semiconductor, Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> */
>
> #ifndef __DTS_IMX6ULL_PINFUNC_H
> @@ -14,46 +11,77 @@
> * The pin function ID is a tuple of
> * <mux_reg conf_reg input_reg mux_mode input_val>
> */
> -#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068
> 0x02f4 0x0000 0x3 0x0
> +/* signals common for i.MX6UL and i.MX6ULL */
> +#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
> +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC
> 0x0348 0x0644 0x0 0x6
> +#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
> +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0
> 0x034C 0x0644 0x0 0x7
> +#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
> +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC
> 0x0358 0x0640 0x1 0x5
> +#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
> +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0
> 0x035C 0x0640 0x1 0x6
> +#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
> +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC
> 0x0478 0x0640 0x8 0x7
>
> -#define MX6UL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4
> 0x0370 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8
> 0x0374 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC
> 0x0378 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0
> 0x037C 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4
> 0x0380 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8
> 0x0384 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC
> 0x0388 0x0000 0x9 0x0
> -#define MX6UL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100
> 0x038C 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_CLK__EPDC_SDCLK 0x0104
> 0x0390 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108
> 0x0394 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C
> 0x0398 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110
> 0x039C 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_RESET__EPDC_GDOE 0x0114
> 0x03A0 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118
> 0x03A4 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C
> 0x03A8 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120
> 0x03AC 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124
> 0x03B0 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128
> 0x03B4 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C
> 0x03B8 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130
> 0x03BC 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134
> 0x03C0 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150
> 0x03DC 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA15__EPDC_GDRL 0x0154
> 0x03E0 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158
> 0x03E4 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA17__EPDC_GDSP 0x015C
> 0x03E8 0x0000 0x9 0x0
> -#define MX6UL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C
> 0x03F8 0x0000 0x9 0x0
> -
> -#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4
> 0x0460 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8
> 0x0464 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC
> 0x0468 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0
> 0x046C 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4
> 0x0470 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8
> 0x0474 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC
> 0x0478 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0
> 0x047C 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4
> 0x0480 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8
> 0x0484 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC
> 0x0488 0x0000 0x9 0x0
> -#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200
> 0x048C 0x0000 0x9 0x0
> +/* signals for i.MX6ULL only */
> +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084
> 0x0310 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084
> 0x0310 0x0644 0x9 0x4
> +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088
> 0x0314 0x0644 0x9 0x5
> +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088
> 0x0314 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C
> 0x0318 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C
> 0x0318 0x0640 0x9 0x3
> +#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090
> 0x031C 0x0640 0x9 0x4
> +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090
> 0x031C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8
> 0x0344 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC
> 0x0348 0x0000 0x9 0x0
> +#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0
> 0x034C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4
> 0x0350 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8
> 0x0354 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC
> 0x0358 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0
> 0x035C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4
> 0x0360 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8
> 0x0364 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC
> 0x0368 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0
> 0x036C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4
> 0x0370 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8
> 0x0374 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC
> 0x0378 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0
> 0x037C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4
> 0x0380 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8
> 0x0384 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC
> 0x0388 0x0000 0x9 0x0
> +#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100
> 0x038C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK 0x0104
> 0x0390 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108
> 0x0394 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C
> 0x0398 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110
> 0x039C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE 0x0114
> 0x03A0 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118
> 0x03A4 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C
> 0x03A8 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120
> 0x03AC 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124
> 0x03B0 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128
> 0x03B4 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C
> 0x03B8 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130
> 0x03BC 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134
> 0x03C0 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150
> 0x03DC 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL 0x0154
> 0x03E0 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158
> 0x03E4 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C
> 0x03E8 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C
> 0x03F8 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170
> 0x03FC 0x0000 0x9 0x0
> +#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174
> 0x0400 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4
> 0x0460 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8
> 0x0464 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC
> 0x0468 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0
> 0x046C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4
> 0x0470 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8
> 0x0474 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC
> 0x0478 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0
> 0x047C 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4
> 0x0480 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8
> 0x0484 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC
> 0x0488 0x0000 0x9 0x0
> +#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200
> 0x048C 0x0000 0x9 0x0
>
> #endif /* __DTS_IMX6ULL_PINFUNC_H */
> diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi
> index 4598f2f411..22e4a307fa 100644
> --- a/arch/arm/dts/imx6ull.dtsi
> +++ b/arch/arm/dts/imx6ull.dtsi
> @@ -1,1173 +1,81 @@
> -/*
> - * Copyright 2015-2016 Freescale Semiconductor, Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2016 Freescale Semiconductor, Inc.
>
> -#include <dt-bindings/clock/imx6ul-clock.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "imx6ul.dtsi"
> #include "imx6ull-pinfunc.h"
> #include "imx6ull-pinfunc-snvs.h"
> -#include "skeleton.dtsi"
>
> -/ {
> - aliases {
> - can0 = &flexcan1;
> - can1 = &flexcan2;
> - ethernet0 = &fec1;
> - ethernet1 = &fec2;
> - gpio0 = &gpio1;
> - gpio1 = &gpio2;
> - gpio2 = &gpio3;
> - gpio3 = &gpio4;
> - gpio4 = &gpio5;
> - i2c0 = &i2c1;
> - i2c1 = &i2c2;
> - i2c2 = &i2c3;
> - i2c3 = &i2c4;
> - mmc0 = &usdhc1;
> - mmc1 = &usdhc2;
> - serial0 = &uart1;
> - serial1 = &uart2;
> - serial2 = &uart3;
> - serial3 = &uart4;
> - serial4 = &uart5;
> - serial5 = &uart6;
> - serial6 = &uart7;
> - serial7 = &uart8;
> - spi0 = &qspi;
> - spi1 = &ecspi1;
> - spi2 = &ecspi2;
> - spi3 = &ecspi3;
> - spi4 = &ecspi4;
> - usbphy0 = &usbphy1;
> - usbphy1 = &usbphy2;
> - usb0 = &usbotg1;
> - usb1 = &usbotg2;
> - };
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - cpu0: cpu@0 {
> - compatible = "arm,cortex-a7";
> - device_type = "cpu";
> - reg = <0>;
> - clock-latency = <61036>; /* two CLK32 periods */
> - operating-points = <
> - /* kHz uV */
> - 528000 1175000
> - 99000 950000
> - >;
> - fsl,soc-operating-points = <
> - /* KHz uV */
> - 528000 1175000
> - 99000 1175000
> - >;
> - clocks = <&clks IMX6UL_CLK_ARM>,
> - <&clks IMX6UL_CLK_PLL2_BUS>,
> - <&clks IMX6UL_CLK_PLL2_PFD2>,
> - <&clks IMX6UL_CA7_SECONDARY_SEL>,
> - <&clks IMX6UL_CLK_STEP>,
> - <&clks IMX6UL_CLK_PLL1_SW>,
> - <&clks IMX6UL_CLK_PLL1_SYS>,
> - <&clks IMX6UL_PLL1_BYPASS>,
> - <&clks IMX6UL_CLK_PLL1>,
> - <&clks IMX6UL_PLL1_BYPASS_SRC>,
> - <&clks IMX6UL_CLK_OSC>;
> - clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
> "secondary_sel", "step",
> - "pll1_sw", "pll1_sys", "pll1_bypass",
> "pll1", "pll1_bypass_src", "osc";
> - };
> - };
> -
> - intc: interrupt-controller@00a01000 {
> - compatible = "arm,cortex-a7-gic";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - reg = <0x00a01000 0x1000>,
> - <0x00a02000 0x100>;
> - };
> -
> - clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ckil: clock@0 {
> - compatible = "fixed-clock";
> - reg = <0>;
> - #clock-cells = <0>;
> - clock-frequency = <32768>;
> - clock-output-names = "ckil";
> - };
> +/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
> +/delete-node/ &uart8;
> +/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
> +/delete-node/ &crypto;
> +
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 900000 1275000
> + 792000 1225000
> + 528000 1175000
> + 396000 1025000
> + 198000 950000
> + >;
> + fsl,soc-operating-points = <
> + /* KHz uV */
> + 900000 1250000
> + 792000 1175000
> + 528000 1175000
> + 396000 1175000
> + 198000 1175000
> + >;
> +};
>
> - osc: clock@1 {
> - compatible = "fixed-clock";
> - reg = <1>;
> - #clock-cells = <0>;
> - clock-frequency = <24000000>;
> - clock-output-names = "osc";
> - };
> +&ocotp {
> + compatible = "fsl,imx6ull-ocotp", "syscon";
> +};
>
> - ipp_di0: clock@2 {
> - compatible = "fixed-clock";
> - reg = <2>;
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - clock-output-names = "ipp_di0";
> - };
> +&usdhc1 {
> + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
> +};
>
> - ipp_di1: clock@3 {
> - compatible = "fixed-clock";
> - reg = <3>;
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - clock-output-names = "ipp_di1";
> - };
> - };
> +&usdhc2 {
> + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
> +};
>
> +/ {
> soc {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - interrupt-parent = <&gpc>;
> - ranges;
> -
> - busfreq {
> - compatible = "fsl,imx_busfreq";
> - clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks
> IMX6UL_CLK_PLL2_198M>,
> - <&clks IMX6UL_CLK_PLL2_BUS>, <&clks
> IMX6UL_CLK_ARM>,
> - <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks
> IMX6UL_CLK_PERIPH>,
> - <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks
> IMX6UL_CLK_PERIPH_CLK2>,
> - <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks
> IMX6UL_CLK_OSC>,
> - <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
> - <&clks IMX6UL_CLK_PERIPH2>, <&clks
> IMX6UL_CLK_PERIPH2_PRE>,
> - <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks
> IMX6UL_CLK_PERIPH2_CLK2_SEL>,
> - <&clks IMX6UL_CLK_STEP>, <&clks
> IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
> - <&clks IMX6UL_PLL1_BYPASS>, <&clks
> IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
> - <&clks IMX6UL_CLK_PLL1>;
> - clock-names = "pll2_pfd2_396m", "pll2_198m",
> "pll2_bus", "arm", "pll3_usb_otg",
> - "periph", "periph_pre", "periph_clk2",
> "periph_clk2_sel", "osc",
> - "ahb", "ocram", "periph2", "periph2_pre",
> "periph2_clk2", "periph2_clk2_sel",
> - "step", "mmdc", "pll1_bypass_src",
> "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
> - fsl,max_ddr_freq = <400000000>;
> - };
> -
> - pmu {
> - compatible = "arm,cortex-a7-pmu";
> - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - };
> -
> - ocrams: sram@00900000 {
> - compatible = "fsl,lpm-sram";
> - reg = <0x00900000 0x4000>;
> - };
> -
> - ocrams_ddr: sram@00904000 {
> - compatible = "fsl,ddr-lpm-sram";
> - reg = <0x00904000 0x1000>;
> - };
> -
> - ocram: sram@00905000 {
> - compatible = "mmio-sram";
> - reg = <0x00905000 0x1B000>;
> - };
> -
> - dma_apbh: dma-apbh@01804000 {
> - compatible = "fsl,imx6ul-dma-apbh",
> "fsl,imx28-dma-apbh";
> - reg = <0x01804000 0x2000>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
> - #dma-cells = <1>;
> - dma-channels = <4>;
> - clocks = <&clks IMX6UL_CLK_APBHDMA>;
> - };
> -
> - gpmi: gpmi-nand@01806000{
> - compatible = "fsl,imx6q-gpmi-nand";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
> - reg-names = "gpmi-nand", "bch";
> - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "bch";
> - clocks = <&clks IMX6UL_CLK_GPMI_IO>,
> - <&clks IMX6UL_CLK_GPMI_APB>,
> - <&clks IMX6UL_CLK_GPMI_BCH>,
> - <&clks IMX6UL_CLK_GPMI_BCH_APB>,
> - <&clks IMX6UL_CLK_PER_BCH>;
> - clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
> - "gpmi_bch_apb", "per1_bch";
> - dmas = <&dma_apbh 0>;
> - dma-names = "rx-tx";
> - status = "disabled";
> - };
> -
> - aips1: aips-bus@02000000 {
> - compatible = "fsl,aips-bus", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x02000000 0x100000>;
> - ranges;
> -
> - spba-bus@02000000 {
> - compatible = "fsl,spba-bus", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x02000000 0x40000>;
> - ranges;
> -
> - spdif: spdif@02004000 {
> - compatible = "fsl,imx6ul-spdif",
> "fsl,imx35-spdif";
> - reg = <0x02004000 0x4000>;
> - interrupts = <GIC_SPI 52
> IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&sdma 41 18 0>,
> - <&sdma 42 18 0>;
> - dma-names = "rx", "tx";
> - clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
> - <&clks IMX6UL_CLK_OSC>,
> - <&clks IMX6UL_CLK_SPDIF>,
> - <&clks IMX6UL_CLK_DUMMY>,
> <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_IPG>,
> - <&clks IMX6UL_CLK_DUMMY>,
> <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_SPBA>;
> - clock-names = "core", "rxtx0",
> - "rxtx1", "rxtx2",
> - "rxtx3", "rxtx4",
> - "rxtx5", "rxtx6",
> - "rxtx7", "dma";
> - status = "disabled";
> - };
> -
> - ecspi1: ecspi@02008000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-ecspi",
> "fsl,imx51-ecspi";
> - reg = <0x02008000 0x4000>;
> - interrupts = <GIC_SPI 31
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ECSPI1>,
> - <&clks IMX6UL_CLK_ECSPI1>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - ecspi2: ecspi@0200c000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-ecspi",
> "fsl,imx51-ecspi";
> - reg = <0x0200c000 0x4000>;
> - interrupts = <GIC_SPI 32
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ECSPI2>,
> - <&clks IMX6UL_CLK_ECSPI2>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - ecspi3: ecspi@02010000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-ecspi",
> "fsl,imx51-ecspi";
> - reg = <0x02010000 0x4000>;
> - interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ECSPI3>,
> - <&clks IMX6UL_CLK_ECSPI3>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - ecspi4: ecspi@02014000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-ecspi",
> "fsl,imx51-ecspi";
> - reg = <0x02014000 0x4000>;
> - interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ECSPI4>,
> - <&clks IMX6UL_CLK_ECSPI4>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart7: serial@02018000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart",
> "fsl,imx21-uart";
> - reg = <0x02018000 0x4000>;
> - interrupts = <GIC_SPI 39
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART7_IPG>,
> - <&clks
> IMX6UL_CLK_UART7_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart1: serial@02020000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart",
> "fsl,imx21-uart";
> - reg = <0x02020000 0x4000>;
> - interrupts = <GIC_SPI 26
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART1_IPG>,
> - <&clks
> IMX6UL_CLK_UART1_SERIAL>;
> - clock-names = "ipg", "per";
> - status = "disabled";
> - };
> -
> - esai: esai@02024000 {
> - compatible = "fsl,imx6ull-esai";
> - reg = <0x02024000 0x4000>;
> - interrupts = <GIC_SPI 51
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
> - <&clks IMX6UL_CLK_ESAI_MEM>,
> - <&clks IMX6UL_CLK_ESAI_EXTAL>,
> - <&clks IMX6UL_CLK_ESAI_IPG>,
> - <&clks IMX6UL_CLK_SPBA>;
> - clock-names = "core", "mem", "extal",
> - "fsys", "dma";
> - dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
> - dma-names = "rx", "tx";
> - dma-source = <&gpr 0 14 0 15>;
> - status = "disabled";
> - };
> -
> - sai1: sai@02028000 {
> - compatible = "fsl,imx6ul-sai",
> - "fsl,imx6sx-sai";
> - reg = <0x02028000 0x4000>;
> - interrupts = <GIC_SPI 97
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
> - <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_SAI1>,
> - <&clks 0>, <&clks 0>;
> - clock-names = "bus", "mclk0", "mclk1",
> "mclk2", "mclk3";
> - dma-names = "rx", "tx";
> - dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
> - status = "disabled";
> - };
> -
> - sai2: sai@0202c000 {
> - compatible = "fsl,imx6ul-sai",
> - "fsl,imx6sx-sai";
> - reg = <0x0202c000 0x4000>;
> - interrupts = <GIC_SPI 98
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
> - <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_SAI2>,
> - <&clks 0>, <&clks 0>;
> - clock-names = "bus", "mclk0", "mclk1",
> "mclk2", "mclk3";
> - dma-names = "rx", "tx";
> - dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
> - status = "disabled";
> - };
> -
> - sai3: sai@02030000 {
> - compatible = "fsl,imx6ul-sai",
> - "fsl,imx6sx-sai";
> - reg = <0x02030000 0x4000>;
> - interrupts = <GIC_SPI 24
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
> - <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_SAI3>,
> - <&clks 0>, <&clks 0>;
> - clock-names = "bus", "mclk0", "mclk1",
> "mclk2", "mclk3";
> - dma-names = "rx", "tx";
> - dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
> - status = "disabled";
> - };
> -
> - asrc: asrc@02034000 {
> - compatible = "fsl,imx53-asrc";
> - reg = <0x02034000 0x4000>;
> - interrupts = <GIC_SPI 50
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
> - <&clks IMX6UL_CLK_ASRC_MEM>,
> <&clks 0>,
> - <&clks 0>, <&clks 0>, <&clks
> 0>, <&clks 0>,
> - <&clks 0>, <&clks 0>, <&clks
> 0>, <&clks 0>,
> - <&clks 0>, <&clks 0>, <&clks
> 0>, <&clks 0>,
> - <&clks IMX6UL_CLK_SPDIF>,
> <&clks 0>, <&clks 0>,
> - <&clks IMX6UL_CLK_SPBA>;
> - clock-names = "mem", "ipg", "asrck_0",
> - "asrck_1", "asrck_2",
> "asrck_3", "asrck_4",
> - "asrck_5", "asrck_6",
> "asrck_7", "asrck_8",
> - "asrck_9", "asrck_a",
> "asrck_b", "asrck_c",
> - "asrck_d", "asrck_e",
> "asrck_f", "dma";
> - dmas = <&sdma 17 23 1>, <&sdma 18 23
> 1>, <&sdma 19 23 1>,
> - <&sdma 20 23 1>, <&sdma 21 23
> 1>, <&sdma 22 23 1>;
> - dma-names = "rxa", "rxb", "rxc",
> - "txa", "txb", "txc";
> - fsl,asrc-rate = <48000>;
> - fsl,asrc-width = <16>;
> - status = "okay";
> - };
> - };
> -
> - tsc: tsc@02040000 {
> - compatible = "fsl,imx6ul-tsc";
> - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_IPG>,
> - <&clks IMX6UL_CLK_ADC2>;
> - clock-names = "tsc", "adc";
> - status = "disabled";
> - };
> -
> - pwm1: pwm@02080000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x02080000 0x4000>;
> - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_PWM1>,
> - <&clks IMX6UL_CLK_PWM1>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm2: pwm@02084000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x02084000 0x4000>;
> - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm3: pwm@02088000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x02088000 0x4000>;
> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_PWM3>,
> - <&clks IMX6UL_CLK_PWM3>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm4: pwm@0208c000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x0208c000 0x4000>;
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - flexcan1: can@02090000 {
> - compatible = "fsl,imx6ul-flexcan",
> "fsl,imx6q-flexcan";
> - reg = <0x02090000 0x4000>;
> - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
> - <&clks IMX6UL_CLK_CAN1_SERIAL>;
> - clock-names = "ipg", "per";
> - stop-mode = <&gpr 0x10 1 0x10 17>;
> - status = "disabled";
> - };
> -
> - flexcan2: can@02094000 {
> - compatible = "fsl,imx6ul-flexcan",
> "fsl,imx6q-flexcan";
> - reg = <0x02094000 0x4000>;
> - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
> - <&clks IMX6UL_CLK_CAN2_SERIAL>;
> - clock-names = "ipg", "per";
> - stop-mode = <&gpr 0x10 2 0x10 18>;
> - status = "disabled";
> - };
> -
> - gpt1: gpt@02098000 {
> - compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
> - reg = <0x02098000 0x4000>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
> - <&clks IMX6UL_CLK_GPT1_SERIAL>;
> - clock-names = "ipg", "per";
> - };
> -
> - gpio1: gpio@0209c000 {
> - compatible = "fsl,imx6ul-gpio",
> "fsl,imx35-gpio";
> - reg = <0x0209c000 0x4000>;
> - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio2: gpio@020a0000 {
> - compatible = "fsl,imx6ul-gpio",
> "fsl,imx35-gpio";
> - reg = <0x020a0000 0x4000>;
> - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio3: gpio@020a4000 {
> - compatible = "fsl,imx6ul-gpio",
> "fsl,imx35-gpio";
> - reg = <0x020a4000 0x4000>;
> - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio4: gpio@020a8000 {
> - compatible = "fsl,imx6ul-gpio",
> "fsl,imx35-gpio";
> - reg = <0x020a8000 0x4000>;
> - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio5: gpio@020ac000 {
> - compatible = "fsl,imx6ul-gpio",
> "fsl,imx35-gpio";
> - reg = <0x020ac000 0x4000>;
> - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - snvslp: snvs@020b0000 {
> - compatible = "fsl,imx6ul-snvs";
> - reg = <0x020b0000 0x4000>;
> - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - fec2: ethernet@020b4000 {
> - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
> - reg = <0x020b4000 0x4000>;
> - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ENET>,
> - <&clks IMX6UL_CLK_ENET_AHB>,
> - <&clks IMX6UL_CLK_ENET_PTP>,
> - <&clks IMX6UL_CLK_ENET2_REF_125M>,
> - <&clks IMX6UL_CLK_ENET2_REF_125M>;
> - clock-names = "ipg", "ahb", "ptp",
> - "enet_clk_ref", "enet_out";
> - stop-mode = <&gpr 0x10 4>;
> - fsl,num-tx-queues=<1>;
> - fsl,num-rx-queues=<1>;
> - fsl,magic-packet;
> - fsl,wakeup_irq = <0>;
> - status = "disabled";
> - };
> -
> - kpp: kpp@020b8000 {
> - compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
> - reg = <0x020b8000 0x4000>;
> - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>;
> - status = "disabled";
> - };
> -
> - wdog1: wdog@020bc000 {
> - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
> - reg = <0x020bc000 0x4000>;
> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_WDOG1>;
> - };
> -
> - wdog2: wdog@020c0000 {
> - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
> - reg = <0x020c0000 0x4000>;
> - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_WDOG2>;
> - status = "disabled";
> - };
> -
> - clks: ccm@020c4000 {
> - compatible = "fsl,imx6ul-ccm";
> - reg = <0x020c4000 0x4000>;
> - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> - #clock-cells = <1>;
> - clocks = <&ckil>, <&osc>, <&ipp_di0>,
> <&ipp_di1>;
> - clock-names = "ckil", "osc", "ipp_di0",
> "ipp_di1";
> - };
> -
> - anatop: anatop@020c8000 {
> - compatible = "fsl,imx6ul-anatop",
> "fsl,imx6q-anatop",
> - "syscon", "simple-bus";
> - reg = <0x020c8000 0x1000>;
> - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> -
> - reg_3p0: regulator-3p0@120 {
> - compatible = "fsl,anatop-regulator";
> - regulator-name = "vdd3p0";
> - regulator-min-microvolt = <2625000>;
> - regulator-max-microvolt = <3400000>;
> - anatop-reg-offset = <0x120>;
> - anatop-vol-bit-shift = <8>;
> - anatop-vol-bit-width = <5>;
> - anatop-min-bit-val = <0>;
> - anatop-min-voltage = <2625000>;
> - anatop-max-voltage = <3400000>;
> - anatop-enable-bit = <0>;
> - };
> -
> - reg_arm: regulator-vddcore@140 {
> - compatible = "fsl,anatop-regulator";
> - regulator-name = "cpu";
> - regulator-min-microvolt = <725000>;
> - regulator-max-microvolt = <1450000>;
> - regulator-always-on;
> - anatop-reg-offset = <0x140>;
> - anatop-vol-bit-shift = <0>;
> - anatop-vol-bit-width = <5>;
> - anatop-delay-reg-offset = <0x170>;
> - anatop-delay-bit-shift = <24>;
> - anatop-delay-bit-width = <2>;
> - anatop-min-bit-val = <1>;
> - anatop-min-voltage = <725000>;
> - anatop-max-voltage = <1450000>;
> - };
> -
> - reg_soc: regulator-vddsoc@140 {
> - compatible = "fsl,anatop-regulator";
> - regulator-name = "vddsoc";
> - regulator-min-microvolt = <725000>;
> - regulator-max-microvolt = <1450000>;
> - regulator-always-on;
> - anatop-reg-offset = <0x140>;
> - anatop-vol-bit-shift = <18>;
> - anatop-vol-bit-width = <5>;
> - anatop-delay-reg-offset = <0x170>;
> - anatop-delay-bit-shift = <28>;
> - anatop-delay-bit-width = <2>;
> - anatop-min-bit-val = <1>;
> - anatop-min-voltage = <725000>;
> - anatop-max-voltage = <1450000>;
> - };
> - };
> -
> - usbphy1: usbphy@020c9000 {
> - compatible = "fsl,imx6ul-usbphy",
> "fsl,imx23-usbphy";
> - reg = <0x020c9000 0x1000>;
> - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USBPHY1>;
> - phy-3p0-supply = <®_3p0>;
> - fsl,anatop = <&anatop>;
> - };
> -
> - usbphy2: usbphy@020ca000 {
> - compatible = "fsl,imx6ul-usbphy",
> "fsl,imx23-usbphy";
> - reg = <0x020ca000 0x1000>;
> - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USBPHY2>;
> - phy-3p0-supply = <®_3p0>;
> - fsl,anatop = <&anatop>;
> - };
> -
> - tempmon: tempmon {
> - compatible = "fsl,imx6ul-tempmon",
> "fsl,imx6sx-tempmon";
> - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> - fsl,tempmon = <&anatop>;
> - fsl,tempmon-data = <&ocotp>;
> - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
> - };
> -
> - snvs: snvs@020cc000 {
> - compatible = "fsl,sec-v4.0-mon", "syscon",
> "simple-mfd";
> - reg = <0x020cc000 0x4000>;
> -
> - snvs_rtc: snvs-rtc-lp {
> - compatible = "fsl,sec-v4.0-mon-rtc-lp";
> - regmap = <&snvs>;
> - offset = <0x34>;
> - interrupts = <GIC_SPI 19
> IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - snvs_poweroff: snvs-poweroff {
> - compatible = "syscon-poweroff";
> - regmap = <&snvs>;
> - offset = <0x38>;
> - mask = <0x61>;
> - };
> -
> - snvs_pwrkey: snvs-powerkey {
> - compatible = "fsl,sec-v4.0-pwrkey";
> - regmap = <&snvs>;
> - interrupts = <GIC_SPI 4
> IRQ_TYPE_LEVEL_HIGH>;
> - linux,keycode = <KEY_POWER>;
> - wakeup;
> - };
> - };
> -
> - epit1: epit@020d0000 {
> - reg = <0x020d0000 0x4000>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - epit2: epit@020d4000 {
> - reg = <0x020d4000 0x4000>;
> - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - src: src@020d8000 {
> - compatible = "fsl,imx6ul-src", "fsl,imx51-src";
> - reg = <0x020d8000 0x4000>;
> - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> - #reset-cells = <1>;
> - };
> -
> - gpc: gpc@020dc000 {
> - compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
> - reg = <0x020dc000 0x4000>;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-parent = <&intc>;
> - fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0
> 0x1400640>;
> - };
> -
> - iomuxc: iomuxc@020e0000 {
> - compatible = "fsl,imx6ul-iomuxc";
> - reg = <0x020e0000 0x4000>;
> - };
> -
> - gpr: iomuxc-gpr@020e4000 {
> - compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
> - reg = <0x020e4000 0x4000>;
> - };
> -
> - mqs: mqs {
> - compatible = "fsl,imx6sx-mqs";
> - gpr = <&gpr>;
> - status = "disabled";
> - };
> -
> - gpt2: gpt@020e8000 {
> - compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
> - reg = <0x020e8000 0x4000>;
> - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - };
> -
> - sdma: sdma@020ec000 {
> - compatible = "fsl,imx6ul-sdma",
> "fsl,imx35-sdma";
> - reg = <0x020ec000 0x4000>;
> - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_SDMA>,
> - <&clks IMX6UL_CLK_SDMA>;
> - clock-names = "ipg", "ahb";
> - #dma-cells = <3>;
> - iram = <&ocram>;
> - fsl,sdma-ram-script-name =
> "imx/sdma/sdma-imx6q.bin";
> - };
> -
> - pwm5: pwm@020f0000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x020f0000 0x4000>;
> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm6: pwm@020f4000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x020f4000 0x4000>;
> - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm7: pwm@020f8000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x020f8000 0x4000>;
> - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> -
> - pwm8: pwm@020fc000 {
> - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
> - reg = <0x020fc000 0x4000>;
> - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "ipg", "per";
> - #pwm-cells = <2>;
> - };
> - };
> -
> - aips2: aips-bus@02100000 {
> - compatible = "fsl,aips-bus", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x02100000 0x100000>;
> - ranges;
> -
> - usbotg1: usb@02184000 {
> - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
> - reg = <0x02184000 0x200>;
> - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USBOH3>;
> - fsl,usbphy = <&usbphy1>;
> - fsl,usbmisc = <&usbmisc 0>;
> - fsl,anatop = <&anatop>;
> - ahb-burst-config = <0x0>;
> - tx-burst-size-dword = <0x10>;
> - rx-burst-size-dword = <0x10>;
> - status = "disabled";
> - };
> -
> - usbotg2: usb@02184200 {
> - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
> - reg = <0x02184200 0x200>;
> - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USBOH3>;
> - fsl,usbphy = <&usbphy2>;
> - fsl,usbmisc = <&usbmisc 1>;
> - ahb-burst-config = <0x0>;
> - tx-burst-size-dword = <0x10>;
> - rx-burst-size-dword = <0x10>;
> - status = "disabled";
> - };
> -
> - usbmisc: usbmisc@02184800 {
> - #index-cells = <1>;
> - compatible = "fsl,imx6ul-usbmisc",
> "fsl,imx6q-usbmisc";
> - reg = <0x02184800 0x200>;
> - };
> -
> - fec1: ethernet@02188000 {
> - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
> - reg = <0x02188000 0x4000>;
> - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ENET>,
> - <&clks IMX6UL_CLK_ENET_AHB>,
> - <&clks IMX6UL_CLK_ENET_PTP>,
> - <&clks IMX6UL_CLK_ENET_REF>,
> - <&clks IMX6UL_CLK_ENET_REF>;
> - clock-names = "ipg", "ahb", "ptp",
> - "enet_clk_ref", "enet_out";
> - stop-mode = <&gpr 0x10 3>;
> - fsl,num-tx-queues=<1>;
> - fsl,num-rx-queues=<1>;
> - fsl,magic-packet;
> - fsl,wakeup_irq = <0>;
> - status = "disabled";
> - };
> -
> - usdhc1: usdhc@02190000 {
> - compatible = "fsl,imx6ul-usdhc",
> "fsl,imx6sx-usdhc";
> - reg = <0x02190000 0x4000>;
> - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USDHC1>,
> - <&clks IMX6UL_CLK_USDHC1>,
> - <&clks IMX6UL_CLK_USDHC1>;
> - clock-names = "ipg", "ahb", "per";
> - bus-width = <4>;
> - fsl,tuning-step= <2>;
> - status = "disabled";
> - };
> -
> - usdhc2: usdhc@02194000 {
> - compatible = "fsl,imx6ul-usdhc",
> "fsl,imx6sx-usdhc";
> - reg = <0x02194000 0x4000>;
> - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_USDHC2>,
> - <&clks IMX6UL_CLK_USDHC2>,
> - <&clks IMX6UL_CLK_USDHC2>;
> - clock-names = "ipg", "ahb", "per";
> - bus-width = <4>;
> - fsl,tuning-step= <2>;
> - status = "disabled";
> - };
> -
> - adc1: adc@02198000 {
> - compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
> - reg = <0x02198000 0x4000>;
> - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_ADC1>;
> - num-channels = <2>;
> - clock-names = "adc";
> - status = "disabled";
> - };
> -
> - i2c1: i2c@021a0000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
> - reg = <0x021a0000 0x4000>;
> - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_I2C1>;
> - status = "disabled";
> - };
> -
> - i2c2: i2c@021a4000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
> - reg = <0x021a4000 0x4000>;
> - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_I2C2>;
> - status = "disabled";
> - };
> -
> - i2c3: i2c@021a8000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
> - reg = <0x021a8000 0x4000>;
> - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_I2C3>;
> - status = "disabled";
> - };
> -
> - romcp@021ac000 {
> - compatible = "fsl,imx6ul-romcp", "syscon";
> - reg = <0x021ac000 0x4000>;
> - };
> -
> - mmdc: mmdc@021b0000 {
> - compatible = "fsl,imx6ul-mmdc",
> "fsl,imx6q-mmdc";
> - reg = <0x021b0000 0x4000>;
> - };
> -
> - weim: weim@021b8000 {
> - compatible = "fsl,imx6ul-weim",
> "fsl,imx6q-weim";
> - reg = <0x021b8000 0x4000>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>;
> - };
> -
> - ocotp: ocotp-ctrl@021bc000 {
> - compatible = "fsl,imx6ull-ocotp", "syscon";
> - reg = <0x021bc000 0x4000>;
> - clocks = <&clks IMX6UL_CLK_OCOTP>;
> - };
> -
> - csu: csu@021c0000 {
> - compatible = "fsl,imx6ul-csu";
> - reg = <0x021c0000 0x4000>;
> - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> - status = "disabled";
> - };
> -
> - csi: csi@021c4000 {
> - compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
> - reg = <0x021c4000 0x4000>;
> - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>,
> - <&clks IMX6UL_CLK_CSI>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "disp-axi", "csi_mclk",
> "disp_dcic";
> - status = "disabled";
> - };
> -
> - lcdif: lcdif@021c8000 {
> - compatible = "fsl,imx6ul-lcdif",
> "fsl,imx28-lcdif";
> - reg = <0x021c8000 0x4000>;
> - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
> - <&clks IMX6UL_CLK_LCDIF_APB>,
> - <&clks IMX6UL_CLK_DUMMY>;
> - clock-names = "pix", "axi", "disp_axi";
> - status = "disabled";
> - };
> -
> - pxp: pxp@021cc000 {
> - compatible = "fsl,imx6ull-pxp-dma",
> "fsl,imx7d-pxp-dma";
> - reg = <0x021cc000 0x4000>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks
> IMX6UL_CLK_PXP>;
> - clock-names = "pxp_ipg", "pxp_axi";
> - status = "disabled";
> - };
> -
> - qspi: qspi@021e0000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ull-qspi",
> "fsl,imx6ul-qspi";
> - reg = <0x021e0000 0x4000>, <0x60000000
> 0x10000000>;
> - reg-names = "QuadSPI", "QuadSPI-memory";
> - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_QSPI>,
> - <&clks IMX6UL_CLK_QSPI>;
> - clock-names = "qspi_en", "qspi";
> - status = "disabled";
> - };
> -
> - wdog3: wdog@021e4000 {
> - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
> - reg = <0x021e4000 0x4000>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_WDOG3>;
> - status = "disabled";
> - };
> -
> - uart2: serial@021e8000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x021e8000 0x4000>;
> - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART2_IPG>,
> - <&clks IMX6UL_CLK_UART2_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart3: serial@021ec000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x021ec000 0x4000>;
> - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART3_IPG>,
> - <&clks IMX6UL_CLK_UART3_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart4: serial@021f0000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x021f0000 0x4000>;
> - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART4_IPG>,
> - <&clks IMX6UL_CLK_UART4_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - uart5: serial@021f4000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x021f4000 0x4000>;
> - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART5_IPG>,
> - <&clks IMX6UL_CLK_UART5_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> -
> - i2c4: i2c@021f8000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
> - reg = <0x021f8000 0x4000>;
> - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_I2C4>;
> - status = "disabled";
> - };
> -
> - uart6: serial@021fc000 {
> - compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x021fc000 0x4000>;
> - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX6UL_CLK_UART6_IPG>,
> - <&clks IMX6UL_CLK_UART6_SERIAL>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> - };
> -
> - aips3: aips-bus@02200000 {
> + aips3: aips-bus@2200000 {
> compatible = "fsl,aips-bus", "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> reg = <0x02200000 0x100000>;
> ranges;
>
> - dcp: dcp@02280000 {
> + dcp: crypto@2280000 {
> + compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
> reg = <0x02280000 0x4000>;
> interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> - /*clocks = <&clks IMX6UL_CLK_DCP>;*/
> + clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
> clock-names = "dcp";
> - status = "disabled";
> };
>
> - rngb: rngb@02284000 {
> - reg = <0x02284000 0x4000>;
> - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + iomuxc_snvs: iomuxc-snvs@2290000 {
> + compatible = "fsl,imx6ull-iomuxc-snvs";
> + reg = <0x02290000 0x4000>;
> };
>
> - uart8: serial@02288000 {
> + uart8: serial@2288000 {
> compatible = "fsl,imx6ul-uart",
> - "fsl,imx6q-uart", "fsl,imx21-uart";
> + "fsl,imx6q-uart";
> reg = <0x02288000 0x4000>;
> interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks IMX6UL_CLK_UART8_IPG>,
> <&clks IMX6UL_CLK_UART8_SERIAL>;
> clock-names = "ipg", "per";
> - dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
> - dma-names = "rx", "tx";
> status = "disabled";
> };
> -
> - epdc: epdc@0228c000 {
> - compatible = "fsl,imx7d-epdc";
> - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> - reg = <0x0228c000 0x4000>;
> - clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
> - <&clks IMX6UL_CLK_EPDC_PIX>;
> - clock-names = "epdc_axi", "epdc_pix";
> - /* Need to fix epdc-ram */
> - /* epdc-ram = <&gpr 0x4 30>; */
> - status = "disabled";
> - };
> -
> - iomuxc_snvs: iomuxc-snvs@02290000 {
> - compatible = "fsl,imx6ull-iomuxc-snvs";
> - reg = <0x02290000 0x10000>;
> - };
> -
> - snvs_gpr: snvs-gpr@0x02294000 {
> - compatible = "fsl, imx6ull-snvs-gpr";
> - reg = <0x02294000 0x10000>;
> - };
> };
> };
> };
>
Reviewed-by: Ye Li <ye...@nxp.com>
Best regards,
Ye Li
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
