> On Aug 9, 2019, at 12:00 PM, Bin Meng <bmeng...@gmail.com> wrote: > > +Simon, Andy, > > Hi Ryan, > >> On Fri, Aug 9, 2019 at 11:52 PM Ryan Wilkins <r...@elevated-networks.com> >> wrote: >> >> Hello, >> >> I’m trying to get u-boot 2019.04 to execute the Linux 4.19.55 kernel from >> u-boot on a generic Core i5 with 8 GB RAM and having issues. The kernel >> that I’m trying to boot will boot fine from GRUB so I know it works but >> starting from u-boot just shows “Starting kernel” and the system appears to >> freeze. > > Which specific Core i5 processor are you using? And what's the U-Boot > target for that board? Is that U-Boot as EFI payload or something? Did > you set up U-Boot environment variable "bootargs" with Linux kernel's > command line, e.g.: I think you need at least specify console=tty0 or > ttyS0?
I’m using a Core i5-6500 on a Supermicro X11SSV-Q mainboard. U-boot is compiled as an EFI 64-bit payload which came from the efi-x86_payload64_defconfig. I disabled xHCI USB support because it was freezing on this board and preventing u-boot from doing anything else. I was setting bootargs to “console=tty0” during a few of the boot tests but it didn’t seem to make any difference. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
