On Sat, Jul 21, 2018 at 06:53:16AM +0200, Heinrich Schuchardt wrote:
> On 07/11/2018 11:06 AM, AKASHI Takahiro wrote:
> > With this patch, PL031 driver is converted to driver-model-compliant
> > driver. In addition, CONFIG_SYS_RTC_PL031_BASE is no longer valid.
> >
> > Signed-off-by: AKASHI Takahi
On Sun, Jul 22, 2018 at 08:44:39AM +0200, Heinrich Schuchardt wrote:
> Hello Tom, hello Alex,
>
> I have been testing the patches. They are working fine for ASCII file
> names. To support Unicode file names extra work will be needed. But
> probably we should postpone this to a later patch series.
On Fri, Jul 20, 2018 at 08:09:00PM +0200, Heinrich Schuchardt wrote:
> On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
> > FAT's root directory does not have "." nor ".."
> > So care must be taken when scanning root directory with fat_itr_resolve().
> > Without this patch, any file path starting wit
When called with ENVOP_SAVE, env_get_location() only returns the
gd->env_load_location variable without actually checking for
the environment location and priority.
This behaviour causes env_save() to fall into an infinite loop when
the low-level drv->save() call fails.
The env_save() function sh
On Fri, Jul 20, 2018 at 08:02:57PM +0200, Heinrich Schuchardt wrote:
> On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
> > Directory iterator was introduced in major re-work of read operation by
> > Rob. We want to use it for write operation extensively as well.
> > This patch makes relevant functio
Hi Marcin,
On 19/07/2018 13:37, Marcin Niestroj wrote:
> ERR05 in IMX6UL errata says to use OCRAM memory above
> 0x908000 (instead of 0x907000) for silicon revision 1.2 shipped
> prior date code 1740.
>
> As we cannot check affected targets in runtime, apply that
> workaround by default for a
On Mon, Jul 23, 2018 at 05:06:46PM +0900, AKASHI Takahiro wrote:
> On Fri, Jul 20, 2018 at 08:02:57PM +0200, Heinrich Schuchardt wrote:
> > On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
> > > Directory iterator was introduced in major re-work of read operation by
> > > Rob. We want to use it for w
From: Tien Fong Chee
The SDRAM must first be rewritten by zeroes if ECC is used to initialize
the ECC metadata. Make the CPU overwrite the DRAM with zeroes in such a
case. This scrubbing implementation turns the caches on temporarily, then
overwrites the whole RAM with zeroes, flushes the caches
Hi Jagan,
On 07/07/2018 13:36, Jagan Teki wrote:
> On Sun, Jun 17, 2018 at 6:52 PM, Michael Trimarchi
> wrote:
>> Add the missing gpio phy reset binding to the gpio and
>> reset time configuration
>>
>> Signed-off-by: Michael Trimarchi
>> ---
>> Changes v1 -> v2:
>> - fix commit message
On Fri, Jul 20, 2018 at 07:55:06PM +0200, Heinrich Schuchardt wrote:
> On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
> > It would be good that FAT write function return error code instead of
> > just returning -1 as fat_read_file() does.
> > This patch attempts to address this issue although it is
On Fri, Jul 20, 2018 at 07:46:49PM +0200, Heinrich Schuchardt wrote:
> On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
> > In this patch, all the necessary code for allowing for a file offset
> > at write is implemented. What plays a major roll here is get_set_cluster(),
> > which, in contrast to it
On Mon, Jul 23, 2018 at 1:57 PM, Stefano Babic wrote:
> Hi Jagan,
>
> On 07/07/2018 13:36, Jagan Teki wrote:
>> On Sun, Jun 17, 2018 at 6:52 PM, Michael Trimarchi
>> wrote:
>>> Add the missing gpio phy reset binding to the gpio and
>>> reset time configuration
>>>
>>> Signed-off-by: Michael Trima
Hi Jay,
On 22/06/2018 07:16, Jay Carlson wrote:
> This patch adds support for booting blank i.MX6 devices in SD/MMC Manufacture
> Mode: a fallback mode which the boot ROM enters when no fuses or boot mode
> pins have been set, the USB serial downloader connection is inactive, and
> there
> is an
Hi Jagan
On Mon, Jul 23, 2018 at 10:40 AM, Jagan Teki wrote:
> On Mon, Jul 23, 2018 at 1:57 PM, Stefano Babic wrote:
>> Hi Jagan,
>>
>> On 07/07/2018 13:36, Jagan Teki wrote:
>>> On Sun, Jun 17, 2018 at 6:52 PM, Michael Trimarchi
>>> wrote:
Add the missing gpio phy reset binding to the gpi
Hi Jay,
On 22/06/2018 07:18, Jay Carlson wrote:
> This patch fixes the ordering of the EMI enum to match Table 8-8 in
> the i.MX6ULL Reference Manual, and has been spot-checked in two other
> i.MX reference manuals for accuracy.
>
> Signed-off-by: Jay Carlson
> ---
> arch/arm/include/asm/mach
On 23.07.2018 08:38, Michal Simek wrote:
> Remove additional trailing whitespaces in prompt reported by kconfiglib:
>
> warning: DM_PMIC_SANDBOX (defined at drivers/power/pmic/Kconfig:133) has
> leading or trailing whitespace in its prompt
> warning: (defined at dts/Kconfig:204) has leading or
On 20.7.2018 21:31, Stefan Herbrechtsmeier wrote:
> Hi Michal,
>
> Am 12.07.2018 um 16:04 schrieb Michal Simek:
>> There should be proper bank name setup to distiguish between different
>> gpio drivers. Use dev->name for it.
>>
>> Signed-off-by: Michal Simek
>> ---
>>
>> drivers/gpio/zynq_gpio.
On 03/07/2018 14:32, Stefan Agner wrote:
> Hi Tom, Hi Stefano,
>
> On 02.07.2018 11:08, Patrick DELAUNAY wrote:
>> Hi Stefan
>>
>>> From: Stefan Agner [mailto:ste...@agner.ch]
>>> Sent: mercredi 27 juin 2018 10:36
>>> Subject: Re: [PATCH v1 1/5] ARM: PSCI: initialize stack pointer on
>>> secondar
On 11/06/2018 14:26, Baruch Siach wrote:
> The newer rev 1.5 of the SolidRun i.MX6 SOM can optionally come with eMMC on
> the SOM. This series adds support for the eMMC device on these SOMs.
>
> Since eMMC has card detect signal this series uses the new mmc_get_op_cond()
> function that is broken
On 20/06/2018 23:27, Michael Trimarchi wrote:
> lcdif_power_down should not be included in spl build to avoid build
> failure introduced by commit eb111bb31d882877e75e6b8083808dcaf6493b92
>
> Signed-off-by: Michael Trimarchi
> ---
> arch/arm/mach-imx/mx6/soc.c | 2 ++
> 1 file changed, 2 inserti
On 28/06/2018 15:56, Mark Jonas wrote:
> Not all i.MX6 pads use the same drive strength table. So far only the
> 240 Ohm to 34 Ohm table was available. Because the constants used have
> speaking names it can be confusing to use e.g. PAD_CTL_DSE_48ohm when
> according to the reference manual 52 Ohm
On 24/06/2018 11:13, Yaniv Levinsky wrote:
> From: Uri Mashiach
>
> Enable the support for all SPI flash types.
>
> Signed-off-by: Uri Mashiach
> Signed-off-by: Yaniv Levinsky
> ---
> configs/cl-som-imx7_defconfig | 7 +++
> 1 file changed, 7 insertions(+)
>
> diff --git a/configs/cl-som
Unfortunately the v1-patches were only send to the maintainers and not
to the official mailinglist.
Am 21.07.2018 um 01:25 schrieb Grygorii Strashko:
On 07/18/2018 03:46 AM, Janine Hagemann wrote:
- Remove 0004-Net-phy-ti-Fix-fifo_depth-register-write.patch because
of the change from 000
Hi Otavio,
On 29/06/2018 20:19, Otavio Salvador wrote:
> From: Fabio Estevam
>
> Instead of keeping a custom environment, use a more generic approach
> by switching to disto config.
>
> Signed-off-by: Fabio Estevam
> Signed-off-by: Otavio Salvador
> ---
>
Applied (whole patchset) to u-boot-
On 06/07/2018 11:26, lz...@dh-electronics.de wrote:
> From: Ludwig Zenz
>
> In preparation for delivery bottlenecks, enable support for GigaDevice,
> Macronix, and Winbond nor flash chips.
>
> Signed-off-by: Ludwig Zenz
> ---
> configs/dh_imx6_defconfig | 3 +++
> 1 file changed, 3 insertions
On 05/07/2018 09:23, lz...@dh-electronics.de wrote:
> From: Ludwig Zenz
>
> This reverts commit a637fe6f27fd4c19ef9f43a5f871c244581422ac.
>
> The DDR DRAM calibration was enhanced by write leveling correction code.
> It can be used with T-topology now.
>
> Signed-off-by: Ludwig Zenz
> ---
> b
On 05/07/2018 09:23, lz...@dh-electronics.de wrote:
> From: Ludwig Zenz
>
> Preperation for conditional DDR3 initialization based on GPIO codes.
>
> Signed-off-by: Ludwig Zenz
> ---
> board/dhelectronics/dh_imx6/dh_imx6_spl.c | 40
> +++
> 1 file changed, 40 insert
On 05/07/2018 09:23, lz...@dh-electronics.de wrote:
> From: Ludwig Zenz
>
> Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit
> bus width
>
> Signed-off-by: Ludwig Zenz
> ---
> board/dhelectronics/dh_imx6/dh_imx6_spl.c | 191
> +++---
> 1 file
On 06/07/2018 03:58, Adam Ford wrote:
> Since the vast majority of i.MX6 boards are migrating to SPL,
> this patch converts im6q_logic to SPL and enables the SDP for
> loading SPL and u-boot.img over USB. The Falcon mode only
> supports NAND flash as of now due to limited space/RAM, but
> all i.MX
On 06/07/2018 16:10, Holger Dengler wrote:
> Signing parts of a u-boot imximage for image verification in High
> Assurance Boot (HAB) in a post-build process, requires some
> information from the imximage header. Currently, this information is
> only provided during the image build, which makes the
On 16/07/2018 22:11, Martin Kaiser wrote:
> From: Martin Kaiser
>
> The USBOH module on imx25 chips contains two USB controllers which are
> called USB OTG Controller and USB Host Controller. Each one has its EHCI
> root hub. The OTG Controller's EHCI registers start at offset 0, the Host
> Contr
On 20/07/2018 15:25, Adam Ford wrote:
> There are already definitions for ramdisk_addr_r and fdt_addr_r, so
> having a duplicate copy called ramdiskaddr and fdtaddr is confusing.
> This patch converts any references to ramdisk_addr_r and fdt_addr_r
> and removes the duplicates.
>
> Signed-off-by:
This reverts commit bc882f5d5c7b4d6ed5e927bf838863af43c786e7.
Signed-off-by: Patrick Delaunay
---
Changes in v2: None
drivers/led/led_gpio.c | 9 -
1 file changed, 9 deletions(-)
diff --git a/drivers/led/led_gpio.c b/drivers/led/led_gpio.c
index a36942b..533587d 100644
--- a/drivers/l
This patch add the 4 LED available on the ED1 board and activated
gpio led driver.
Reviewed-by: Simon Glass
Signed-off-by: Patrick Delaunay
---
Changes in v2: None
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 24
configs/stm32mp15_basic_defconfig| 2 ++
2 files
This patch save common LED property "default-state" value
in post bind of LED uclass.
The configuration for this default state is only performed when
led_default_state() is called;
It can be called in your board_init()
or it could added in init_sequence_r[] in future.
Reviewed-by: Simon Glass
Sig
Initialize the led with the default state defined in device tree.
Signed-off-by: Patrick Delaunay
---
Changes in v2: None
board/st/stm32mp1/stm32mp1.c | 4
1 file changed, 4 insertions(+)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index cc39fa6..db8c805 1006
The variable 'n' represents the number of bytes to be read from a certain
offset in a file, to a certain offset in buffer 'buf'. The variable 'len'
represents the length of the entire file, clamped correctly to avoid any
overflows.
Therefore, comparing 'n' and 'len' to determine whether clearing '
Initialize the led with the default state defined in device tree
in board_init and solve issue with test for led default state.
Signed-off-by: Patrick Delaunay
---
Led default-state is correctly handle in Sandbox, tested with:
./u-boot -d ./arch/sandbox/dts/test.dtb
=> led list
sandbox:red
Hi,
The commit bc882f5d5c7b4d6ed5e927bf838863af43c786e7
introduce auto probe of LED in binding function
but that cause issue on my board.
This first patch of this patchset activateis the LED on my board
to explain the issue, the second patch revert this commit and
the third one propose an other
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 474ecd2c84d97314b8145fbe3a57887f41b2edb3:
env: Simplify Makefile using $(SPL_TPL_) (2018-07-21 12:24:31 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fe
Add README file for i.MX8QXP MEK board.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: Anatolij Gustschin
---
This patch is for testing i.MX8QXP patchset [PATCH V2 00/32] i.MX: Add i.MX8QXP
support
https://lists.denx.de/pipermail/u-boot/2018-July/335079.html
The board is usi
Call xilinx_gpio_get_bank_pin() before use.
Reported-by: Stefan Herbrechtsmeier
Signed-off-by: Michal Simek
---
drivers/gpio/xilinx_gpio.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
index 48b52c985a55..8ce
Exchange two functions to avoid function declaration for next patch.
Signed-off-by: Michal Simek
---
drivers/gpio/xilinx_gpio.c | 38 +++---
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
in
There is no user for !DM driver that's why remove it.
Signed-off-by: Michal Simek
---
drivers/gpio/xilinx_gpio.c | 338 +
1 file changed, 2 insertions(+), 336 deletions(-)
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
index 9d3
Reading registers for finding out output value is not working because
input value is read instead in case of tristate.
Reported-by: Stefan Herbrechtsmeier
Signed-off-by: Michal Simek
---
drivers/gpio/xilinx_gpio.c | 38 +-
1 file changed, 33 insertions(+), 5
Hi,
On 20.7.2018 22:05, Stefan Herbrechtsmeier wrote:
> Hi Michal,
>
> Am 13.07.2018 um 17:20 schrieb Michal Simek:
>> This patch is enabling GPIO_DM support to have an option to use this
>> driver together with zynq gpio driver.
>> !DM part is kept there till Microblaze is cleanup which will be
On 20.7.2018 14:53, Tom Rini wrote:
> On Fri, Jul 20, 2018 at 02:05:07PM +0200, Michal Simek wrote:
>
>> CMD_DM is used for debug purpose and it shouldn't be enabled by default
>> via Kconfig. Unfortunately this is in the tree for quite a long time
>> that's why solution is to use imply DM for all
Hello there,
Sorry about this but I could use some assistance. I am trying to get the
ethernet to work under the sandbox and am having issues. I saw and applied the
patch from Joe Hershberger-2 that seemed to be relevant to my issue.
I have applied the patches on the following page to my late
On Mon, Jul 23, 2018 at 08:40:51AM +0200, Michal Simek wrote:
> On 20.7.2018 14:53, Tom Rini wrote:
> > On Fri, Jul 20, 2018 at 02:05:07PM +0200, Michal Simek wrote:
> >
> >> CMD_DM is used for debug purpose and it shouldn't be enabled by default
> >> via Kconfig. Unfortunately this is in the tree
Hi Marek,
On 23/07/2018 11:42, Marek Vasut wrote:
> The variable 'n' represents the number of bytes to be read from a certain
> offset in a file, to a certain offset in buffer 'buf'. The variable 'len'
> represents the length of the entire file, clamped correctly to avoid any
> overflows.
>
> The
device_get_supply_regulator() only needs to be called once.
But each time there's call to adc_vxx_value() for instance, it calls
adc_vxx_platdata_update() -> device_get_supply_regulator().
This also allows vdd_supply/vss_supply to be provided directly from
uc_pdata, e.g dt-binding variant like stm
Enable ADC on stm32mp15.
- CONFIG_CMD_ADC
- CONFIG_STM32_ADC
Signed-off-by: Fabrice Gasnier
---
configs/stm32mp15_basic_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/stm32mp15_basic_defconfig
b/configs/stm32mp15_basic_defconfig
index 3a94db5..bbb65b5 1
add clk_valid() to check for optional clocks are valid.
Signed-off-by: Fabrice Gasnier
---
include/clk.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/clk.h b/include/clk.h
index 9a35764..71679a9 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -294,4 +294,14 @@ int c
This patch adds documentation of device tree bindings for the STM32 ADC.
It's based on linux-v4.18-rc* dt-bindings, at the time of writing:
- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
Signed-off-by: Fabrice Gasnier
---
doc/device-tree-bindings/adc/st,stm32-adc.txt | 141 +++
Add ADC device tree node. This allows to get analog conversions on
stm32mp157.
Signed-off-by: Fabrice Gasnier
---
arch/arm/dts/stm32mp157.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi
index
This patch adds support for STMicroelectronics STM32 ADC (analog to
digital converter). It's originally based on Linux kernel v4.18-rcs
drivers/iio/adc/stm32-adc*. It's composed of:
- core driver (UCLASS_SIMPLE_BUS) manages common resources (clk, regu).
- child drivers (UCLASS_ADC) declare each ADC
On 07/23/2018 10:20 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> The SDRAM must first be rewritten by zeroes if ECC is used to initialize
> the ECC metadata. Make the CPU overwrite the DRAM with zeroes in such a
> case. This scrubbing implementation turns the caches on temporari
Hi Peng,
On Mon, Jul 23, 2018 at 7:00 AM, Peng Fan wrote:
> Add README file for i.MX8QXP MEK board.
Thanks for submitting the README file.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Fabio Estevam
> Cc: Anatolij Gustschin
> ---
>
> This patch is for testing i.MX8QXP patchset [PATC
Better use depends on instead of select.
Signed-off-by: Michal Simek
Reviewed-by: Tom Rini
---
Changes in v2: None
I found this in connection to setup imply CMD_DM and it seems to not
standard that it is selecting DM which is not used anywhere else.
---
common/Kconfig | 2 +-
1 file changed,
Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
entry should be separated by newline.
Signed-off-by: Michal Simek
---
Changes in v2:
- new patch - not to confuse script
arch/arm/Kconfig | 10 +-
arch/arm/mach-imx/mx6/Kconfig | 14 +++---
cmd/K
Fix Kconfig bool, default, select and imply options to be
alphabetically sorted.
Signed-off-by: Michal Simek
---
Changes in v2:
- new patch
I have sorted only Kconfig which I need for the next patch.
---
arch/Kconfig | 54 +-
arch/arm/Kconfig |
Another round of sorting Kconfig entries aplhabetically.
Signed-off-by: Michal Simek
---
Changes in v2: None
Kconfig | 22 ++---
arch/arc/Kconfig | 10 +-
arch/arm/cpu/armv7/ls102xa/Kconfig| 10 +-
arch/arm/
CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kconfig. Unfortunately this is in the tree for quite a long time
that's why solution is to use imply DM for all targets which are
enabling DM.
Signed-off-by: Michal Simek
---
Changes in v2:
- sort them
Based on this dis
On 19.7.2018 10:35, Marek Vasut wrote:
> On 07/19/2018 08:44 AM, Michal Simek wrote:
>> On 19.7.2018 08:36, Luis Araneda wrote:
>>> Hi,
>>>
>>> On Thu, Jul 19, 2018 at 1:58 AM Michal Simek
>>> wrote:
On 18.7.2018 22:11, Marek Vasut wrote:
> On 07/18/2018 04:57 PM, Michal Simek wrote:
>>>
Trivial Kconfig cleanup. Use tabs instead of spaces.
Signed-off-by: Michal Simek
---
drivers/fpga/Kconfig | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index d36c4c5e2804..50e901973d13 100644
--- a/drivers/fpga/K
On Mon, Jul 23, 2018 at 11:42:12AM +0200, Marek Vasut wrote:
> The variable 'n' represents the number of bytes to be read from a certain
> offset in a file, to a certain offset in buffer 'buf'. The variable 'len'
> represents the length of the entire file, clamped correctly to avoid any
> overflow
On Sun, Jul 22, 2018 at 08:44:39AM +0200, Heinrich Schuchardt wrote:
> Hello Tom, hello Alex,
>
> I have been testing the patches. They are working fine for ASCII file
> names. To support Unicode file names extra work will be needed. But
> probably we should postpone this to a later patch series.
On Sun, Jul 08, 2018 at 06:18:48AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_NAND_LPC32XX_SLC
>
> Signed-off-by: Adam Ford
>
> diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
> index 14c24ce6f2..8a37122104 100644
Applied to u-boot/ma
On Sun, Jul 08, 2018 at 06:43:36AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_NAND_DAVINCI
>
> Signed-off-by: Adam Ford
>
> diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig
> index 497e5515d7..43292a126d 100644
Applied to u-boot/master, thanks!
-
On Sun, Jul 08, 2018 at 08:11:07AM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_NAND_ATMEL
>
> Signed-off-by: Adam Ford
>
> diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig
> b/configs/at91sam9260ek_dataflash_cs0_defconfig
> index 3d2b8803ea..c77b8d8a
On Mon, Jul 23, 2018 at 03:55:13PM +0200, Michal Simek wrote:
> Fix Kconfig bool, default, select and imply options to be
> alphabetically sorted.
>
> Signed-off-by: Michal Simek
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
_
On Tue, Jul 10, 2018 at 06:47:33AM -0500, Adam Ford wrote:
> The DA850-EVM and OMAPL138_LCDK both use checks for CONFIG_USE_NAND.
> This patch changes these checks to CONFIG_NAND which is already defined
> in Kconfig. Since the OMAPL138_LCDK already had CONFIG_NAND defined in its
> defconfig, it
On Mon, Jul 23, 2018 at 03:55:12PM +0200, Michal Simek wrote:
> Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
> entry should be separated by newline.
>
> Signed-off-by: Michal Simek
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
__
On Mon, Jul 23, 2018 at 03:55:11PM +0200, Michal Simek wrote:
> Better use depends on instead of select.
>
> Signed-off-by: Michal Simek
> Reviewed-by: Tom Rini
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mai
On 23.7.2018 14:15, Tom Rini wrote:
> On Mon, Jul 23, 2018 at 08:40:51AM +0200, Michal Simek wrote:
>> On 20.7.2018 14:53, Tom Rini wrote:
>>> On Fri, Jul 20, 2018 at 02:05:07PM +0200, Michal Simek wrote:
>>>
CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kcon
On Sat, Jul 07, 2018 at 10:18:22PM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_MTD_PARTITIONS
>CONFIG_MTD_DEVICE
>
> Signed-off-by: Adam Ford
>
> diff --git a/README b/README
> index b1ddf89fc5..aee0f7371c 100644
Applied to u-boot/master, thanks!
--
Tom
On Sun, Jul 08, 2018 at 07:28:10AM -0500, Adam Ford wrote:
> Some boards indicate support from booting NAND or
> ONENAND booting, but don't enable the CONFIG_NAND. This
> makes those boards imply NAND which will make
> enabling other flags that are dependent on CONFIG_NAND
> possible and easier t
On Mon, Jul 23, 2018 at 03:55:15PM +0200, Michal Simek wrote:
> Another round of sorting Kconfig entries aplhabetically.
>
> Signed-off-by: Michal Simek
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
On Sun, Jul 08, 2018 at 07:50:28AM -0500, Adam Ford wrote:
> Many boards check for CMD_NAND and not NAND. This makes CMD_NAND
> imply NAND which will make some Kconfig migration of some NAND
> options easier later.
>
> Rsync all defconfig files using moveconfig.py
>
> Signed-off-by: Adam Ford
On Mon, Jul 23, 2018 at 03:55:14PM +0200, Michal Simek wrote:
> CMD_DM is used for debug purpose and it shouldn't be enabled by default
> via Kconfig. Unfortunately this is in the tree for quite a long time
> that's why solution is to use imply DM for all targets which are
> enabling DM.
>
> Sign
On 07/20/2018 07:49 PM, Simon Glass wrote:
Use GNU make pattern rules to indicate that a single run of binman
produces all three Tegra output files. The avoids make running binman
three times (perhaps in parallel) and those instances inteferring with
each other.
See http://patchwork.ozlabs.org/p
Hi Michal,
On Mon, 2018-07-23 at 15:55 +0200, Michal Simek wrote:
> Another round of sorting Kconfig entries aplhabetically.
>
> Signed-off-by: Michal Simek
> ---
>
> Changes in v2: None
[snip]
> arch/arc/Kconfig | 10 +-
Acked-by: Alexey Brodkin
___
On Mon, Mar 19, 2018 at 5:35 PM Tom Rini wrote:
>
> On Sun, Mar 04, 2018 at 04:46:53PM -0600, Adam Ford wrote:
>
> > Several boards do not use the default UART3, so they do a check
> > for ifdef CONFIG_SPL_BUILD and enable the pointer for
> > CONFIG_SYS_NS16550_COMx to point to OMAP34XX_UARTx.
> >
On Mon, Jul 23, 2018 at 10:53:02AM -0500, Adam Ford wrote:
> On Mon, Mar 19, 2018 at 5:35 PM Tom Rini wrote:
> >
> > On Sun, Mar 04, 2018 at 04:46:53PM -0600, Adam Ford wrote:
> >
> > > Several boards do not use the default UART3, so they do a check
> > > for ifdef CONFIG_SPL_BUILD and enable the
On Mon, Jul 23, 2018 at 11:44:04AM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 474ecd2c84d97314b8145fbe3a57887f41b2edb3:
>
> env: Simplify Makefile using $(SPL_TPL_) (2018-07-21 12:24:31 -0400)
>
> are available in th
Hi Michal,
Am 23.07.2018 um 11:08 schrieb Michal Simek:
On 20.7.2018 21:31, Stefan Herbrechtsmeier wrote:
Am 12.07.2018 um 16:04 schrieb Michal Simek:
There should be proper bank name setup to distiguish between different
gpio drivers. Use dev->name for it.
Signed-off-by: Michal Simek
---
Hi Michal,
On 23 July 2018 at 03:08, Michal Simek wrote:
>
> On 20.7.2018 21:31, Stefan Herbrechtsmeier wrote:
> > Hi Michal,
> >
> > Am 12.07.2018 um 16:04 schrieb Michal Simek:
> >> There should be proper bank name setup to distiguish between different
> >> gpio drivers. Use dev->name for it.
>
Hi Michal,
Am 23.07.2018 um 13:43 schrieb Michal Simek:
Reading registers for finding out output value is not working because
input value is read instead in case of tristate.
Reported-by: Stefan Herbrechtsmeier
Signed-off-by: Michal Simek
---
drivers/gpio/xilinx_gpio.c | 38 +++
Hi Michal,
Am 23.07.2018 um 13:43 schrieb Michal Simek:
On 20.7.2018 22:05, Stefan Herbrechtsmeier wrote:
Am 13.07.2018 um 17:20 schrieb Michal Simek:
This patch is enabling GPIO_DM support to have an option to use this
driver together with zynq gpio driver.
!DM part is kept there till Microbl
Hi Peng,
On Thu, Jul 19, 2018 at 11:04 AM, Peng Fan wrote:
> There is i.MX8/8X/8M, 8M is for i.MX8MQ and i.MX8MM
> i.MX8/8X has different SoC architecture compared with i.MX8M,
> such as there is SCU inside i.MX8/8X.
> So add a new macro dedicated for i.MX8/8X.
Yes, I understand the differences
On 07/23/2018 04:09 PM, Tom Rini wrote:
> On Mon, Jul 23, 2018 at 11:42:12AM +0200, Marek Vasut wrote:
>
>> The variable 'n' represents the number of bytes to be read from a certain
>> offset in a file, to a certain offset in buffer 'buf'. The variable 'len'
>> represents the length of the entire
Banana Pi M2 Ultra and M2 Berry are very similar boards. SATA can be
enabled exactly the same as for M2 Ultra introduced in
commit daa8b75a5527 ("sunxi: enable SATA on Banana Pi M2 Ultra").
Signed-off-by: Simon Baatz
---
configs/bananapi_m2_berry_defconfig | 3 +++
1 file changed, 3 insertions
Hi Patrick,
On 23 July 2018 at 03:41, Patrick Delaunay wrote:
> This reverts commit bc882f5d5c7b4d6ed5e927bf838863af43c786e7.
A revert should have a motivation and a discussion of the purpose,
just like any other patch. Can you add it please?
>
> Signed-off-by: Patrick Delaunay
> ---
>
> Chang
On 23 July 2018 at 03:41, Patrick Delaunay wrote:
> Initialize the led with the default state defined in device tree.
>
> Signed-off-by: Patrick Delaunay
> ---
>
> Changes in v2: None
>
> board/st/stm32mp1/stm32mp1.c | 4
> 1 file changed, 4 insertions(+)
Reviewed-by: Simon Glass
But I w
Hi,
On 20 July 2018 at 11:35, Heinrich Schuchardt wrote:
> On 07/20/2018 04:57 AM, AKASHI Takahiro wrote:
>> "mkdir" interface is added to file operations.
>> This is a preparatory change as mkdir support for FAT file system
>> will be added in next patch.
>>
>> Signed-off-by: AKASHI Takahiro
>>
Hi Patrick,
On 23 July 2018 at 03:41, Patrick Delaunay wrote:
> Initialize the led with the default state defined in device tree
> in board_init and solve issue with test for led default state.
>
> Signed-off-by: Patrick Delaunay
> ---
> Led default-state is correctly handle in Sandbox, tested w
On 20 July 2018 at 04:31, Michal Simek wrote:
> There is no reason not to use macros which are already defined.
> It is also much easier for grepping.
>
> Signed-off-by: Michal Simek
> ---
>
> tools/fit_image.c | 53 +
> 1 file changed, 29 inse
On 23 July 2018 at 06:35, Fabrice Gasnier wrote:
> Enable ADC on stm32mp15.
> - CONFIG_CMD_ADC
> - CONFIG_STM32_ADC
>
> Signed-off-by: Fabrice Gasnier
> ---
>
> configs/stm32mp15_basic_defconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Simon Glass
Hi Fabrice,
On 23 July 2018 at 06:35, Fabrice Gasnier wrote:
> device_get_supply_regulator() only needs to be called once.
> But each time there's call to adc_vxx_value() for instance, it calls
> adc_vxx_platdata_update() -> device_get_supply_regulator().
>
> This also allows vdd_supply/vss_suppl
On 20 July 2018 at 01:44, Patrice Chotard wrote:
> Signed-off-by: Patrice Chotard
> ---
>
> configs/stm32f429-evaluation_defconfig | 1 -
> 1 file changed, 1 deletion(-)
>
Reviewed-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists.denx.de
https://
1 - 100 of 127 matches
Mail list logo
