On 10/01/2017 02:41 AM, Tom Rini wrote:
On Sat, Sep 30, 2017 at 10:20:47PM +0200, Łukasz Majewski wrote:
On 09/14/2017 04:55 PM, Tom Rini wrote:
On Mon, Sep 11, 2017 at 10:53:51PM +0200, Łukasz Majewski wrote:
On 09/11/2017 07:31 PM, Tom Rini wrote:
On Sun, Sep 10, 2017 at 08:25:02PM +0200, L
Hi Simon,
On 25/09/2017 04:12, Simon Glass wrote:
Hi Jean-Jacques,
On 15 September 2017 at 04:57, Jean-Jacques Hiblot wrote:
Sort include files in accordance to U-Boot coding style.
Signed-off-by: Jean-Jacques Hiblot
---
lib/fdtdec.c | 10 +-
1 file changed, 5 insertions(+), 5 d
Hi Jaehoon,
On 22/09/2017 15:54, Jaehoon Chung wrote:
Hi,
On 09/21/2017 11:29 PM, Jean-Jacques Hiblot wrote:
This adds a simple helper function to display information (bus width and
mode) based on a capability mask. Useful for debug.
I agreed this is useful.. but there is no usage in your pa
On 22/09/2017 15:54, Jaehoon Chung wrote:
On 09/21/2017 11:30 PM, Jean-Jacques Hiblot wrote:
From: Kishon Vijay Abraham I
Add a new function *mmc_set_signal_voltage* in mmc core
which can be used during mmc initialization to select the
signal voltage. Platform driver should use the set_ios
c
On 22/09/2017 15:54, Jaehoon Chung wrote:
On 09/21/2017 11:30 PM, Jean-Jacques Hiblot wrote:
From: Kishon Vijay Abraham I
With certain SD cards like Kingston 8GB/16GB UHS card, it is seen that
MMC_CMD_ALL_SEND_CID cmd fails on first attempt, but succeeds
subsequently. Therefore, retry MMC_CM
On 22/09/2017 15:54, Jaehoon Chung wrote:
On 09/21/2017 11:30 PM, Jean-Jacques Hiblot wrote:
From: Kishon Vijay Abraham I
Add a new function to parse host controller dt node and
set mmc_config. This function can be used by mmc controller
drivers to set the generic mmc_config.
This function c
On 22/09/2017 16:42, Jaehoon Chung wrote:
Dear JJ,
On 09/21/2017 11:29 PM, Jean-Jacques Hiblot wrote:
This series brings support for HS200 and UHS modes to the mmc core.
It has been tested with the hsmmc driver on several platforms (DRA7,
AM57x, AM437x, beaglebone black, Atmel SAMA5D3 xplaine
On Sel, 2017-09-26 at 12:33 +0200, Marek Vasut wrote:
> On 09/26/2017 10:20 AM, Chee, Tien Fong wrote:
> >
> > On Isn, 2017-09-25 at 11:15 +0200, Marek Vasut wrote:
> > >
> > > On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee
> > > >
> > > >
On 10/02/2017 12:01 PM, Chee, Tien Fong wrote:
> On Sel, 2017-09-26 at 12:33 +0200, Marek Vasut wrote:
>> On 09/26/2017 10:20 AM, Chee, Tien Fong wrote:
>>>
>>> On Isn, 2017-09-25 at 11:15 +0200, Marek Vasut wrote:
On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
>
>
>
On Isn, 2017-09-25 at 11:23 +0200, Marek Vasut wrote:
> On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Clock frequency info is required in U-boot.
> >
> > Signed-off-by: Tien Fong Chee
> I want a TB on Gen 5
>
This patch break the gen5, because cm
On Isn, 2017-10-02 at 12:04 +0200, Marek Vasut wrote:
> On 10/02/2017 12:01 PM, Chee, Tien Fong wrote:
> >
> > On Sel, 2017-09-26 at 12:33 +0200, Marek Vasut wrote:
> > >
> > > On 09/26/2017 10:20 AM, Chee, Tien Fong wrote:
> > > >
> > > >
> > > > On Isn, 2017-09-25 at 11:15 +0200, Marek Vasut
On 10/02/2017 12:04 PM, Chee, Tien Fong wrote:
> On Isn, 2017-09-25 at 11:23 +0200, Marek Vasut wrote:
>> On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> Clock frequency info is required in U-boot.
>>>
>>> Signed-off-by: Tien Fong Chee
>> I want a TB o
On Sun, Oct 1, 2017 at 9:20 PM, Fabio Estevam wrote:
> Hi Tom,
>
> On Sun, Oct 1, 2017 at 11:49 AM, Tom Rini wrote:
>
>>> Same regression is observed with mx7dsabresd board as well.
>>
>> It's likely to be all i.MX :(
>
> Only the i.MX configs with CONFIG_DM_MMC=y.
>
>> Have all of the changes go
On Isn, 2017-10-02 at 12:10 +0200, Marek Vasut wrote:
> On 10/02/2017 12:04 PM, Chee, Tien Fong wrote:
> >
> > On Isn, 2017-09-25 at 11:23 +0200, Marek Vasut wrote:
> > >
> > > On 09/25/2017 10:40 AM, tien.fong.c...@intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee
> > > >
> > > >
Lukasz & Marek,
> On 12 Sep 2017, at 10:43, Łukasz Majewski wrote:
>
> Hi Dr. Philipp,
>
>> Hi Lukasz,
>>> On 12 Sep 2017, at 10:14, Łukasz Majewski wrote:
>>>
>>> Hi Philipp,
>>>
>>> This patch series is waiting for opening new merge window. It is already
>>> applied to usb-next tree.
>> D
On 10/02/2017 12:40 PM, Dr. Philipp Tomsich wrote:
> Lukasz & Marek,
>
>> On 12 Sep 2017, at 10:43, Łukasz Majewski wrote:
>>
>> Hi Dr. Philipp,
>>
>>> Hi Lukasz,
On 12 Sep 2017, at 10:14, Łukasz Majewski wrote:
Hi Philipp,
This patch series is waiting for opening new me
+Kever, +Eddie
Kever & Eddie,
> On 2 Oct 2017, at 12:41, Marek Vasut wrote:
>
> On 10/02/2017 12:40 PM, Dr. Philipp Tomsich wrote:
>> Lukasz & Marek,
>>
>>> On 12 Sep 2017, at 10:43, Łukasz Majewski wrote:
>>>
>>> Hi Dr. Philipp,
>>>
Hi Lukasz,
> On 12 Sep 2017, at 10:14, Łukasz Ma
Hi Jagan,
On Mon, Oct 2, 2017 at 7:23 AM, Jagan Teki wrote:
> Yes, currently I'm using DM_MMC for U-Boot proper and recently I've
> moved SPL as well [1]. But I've seen an issue with i.MX6UL while
> moving to OF_SPL
What exactly is the MX6UL issue you see?
Thanks
_
On Sun, 2017-09-03 at 17:46 +0800, Bin Meng wrote:
> Hi Andy,
>
> On Wed, Aug 30, 2017 at 11:04 PM, Andy Shevchenko
> wrote:
> > Intel Tangier SoC is a part of Intel Merrifield platform which
> > doesn't
> > utilize ACPI by default. Here is an attempt to unleash ACPI
> > flexibility
> > power on
From: Fabio Estevam
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline.
Currently the rootfs location is passed via mmcblk number and the
problem with this approach is that the mmcblk number for the SD
card changes depending on the kernel version.
In order to avoid
On 28/09/2017 07:34, Peng Fan wrote:
> Hi Stefano,
>
>> -Original Message-
>> From: Peng Fan
>> Sent: Tuesday, September 26, 2017 10:04 AM
>> To: 'Stefano Babic'
>> Cc: van.free...@gmail.com; u-boot@lists.denx.de; Fabio Estevam
>>
>> Subject: RE: [PATCH V4 11/12] imx: mx6sabresd: enable
On 31/08/2017 00:13, Eric Nelson wrote:
> This adds support for two additional boot modes on the i.MX7D SoC, which
> is most useful when doing U-Boot development on this chip.
>
> 1. "bmode usb" can be used to force the ROM boot loader's serial
> 2. "bmode normal" can be used to revert to the norm
Hi,
commit 46f9ef18461609064a1ffbc3f61dc027ec76b3ff
Author: Andrew F. Davis
Date: Fri Apr 21 10:01:28 2017 -0500
Kconfig: Enable FIT support by default for TI platforms
Almost all TI defconfigs enable this already, add this as a default
and remove the explicit assignment.
Si
The setbits/clrbits/clrsetbits macros are used widely across the tree,
let's provide implementation for them in the sandbox.
Signed-off-by: Maxime Ripard
---
arch/sandbox/include/asm/io.h | 47 +++
1 file changed, 47 insertions(+)
diff --git a/arch/sandbo
Hi Jagan,
On 19/09/2017 20:37, Jagan Teki wrote:
> From: Jagan Teki
>
> This series add OF_CONTROL support for SPL on Engicam i.MX6QDL
> boards, along with proper code optimzation changes.
>
>
> Jagan Teki (6):
> i.MX6: engicam: Fix MAINTAINERS/README
> imx6ul: geam6ul/isiot: Fix to MMC de
Hi Fabio,
On 27/09/2017 19:27, Fabio Estevam wrote:
> Latest wandboard hardware revision is revd1, which brings the following
> new features:
>
> - PFUZE100 PMIC
> - AR8035 Ethernet PHY
> - Upgrade Wifi/BT chip to BCM4339/BCM43430.
>
This patch cannot be applied anymore - as you will be prepari
On 30/09/2017 03:54, Otavio Salvador wrote:
> This rework the board to use the generic filesystem commands instead
> of forcing the use of FAT for the boot files.
>
> Signed-off-by: Otavio Salvador
> ---
>
> configs/mx25pdk_defconfig | 5 +++--
> include/configs/mx25pdk.h | 9 ++---
> 2 fil
On 30/09/2017 03:55, Otavio Salvador wrote:
> The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it.
>
> Signed-off-by: Otavio Salvador
> ---
>
> include/configs/mx25pdk.h | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
> index 57e2a6
On 25/09/2017 20:20, Fabio Estevam wrote:
> From: Fabio Estevam
>
> CONFIG_SPL_PAD_TO is already defined inside "imx6_spl.h", so there
> is no need to redefine it in the board config files.
>
> Signed-off-by: Fabio Estevam
> ---
> include/configs/apalis_imx6.h | 1 -
> include/configs/colibri
On Mon, Oct 02, 2017 at 03:24:01PM +0200, Guillaume Gardet wrote:
> Hi,
>
> commit 46f9ef18461609064a1ffbc3f61dc027ec76b3ff
> Author: Andrew F. Davis
> Date: Fri Apr 21 10:01:28 2017 -0500
>
> Kconfig: Enable FIT support by default for TI platforms
>
> Almost all TI defconfigs enable
On 22/09/2017 17:12, Diego Dorta wrote:
> When building with W=1 errors like the one below is seen:
>
> board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning:
> no previous prototype for ‘overwrite_console’
> [-Wmissing-prototypes] int overwrite_console(void)
>
> Fix the build warnings by includ
On 21/09/2017 20:10, Diego Dorta wrote:
> When compiling with W=1 the following warning is observed:
>
> board/freescale/mx6sabresd/mx6sabresd.c:266:5: warning:
> no previous prototype for ‘board_mmc_get_env_dev’
> [-Wmissing-prototypes] int board_mmc_get_env_dev(int devno)
>
> Remove this warnin
On Fri, Sep 29, 2017 at 7:53 AM, See, Chin Liang
wrote:
> On Tue, 2017-09-26 at 17:08 -0500, Dinh Nguyen wrote:
>> On Tue, Sep 19, 2017 at 4:22 AM, wrote:
>> >
>> > From: Chin Liang See
>> >
>> > Add Reset Manager driver support for Stratix SoC
>> >
>> > Signed-off-by: Chin Liang See
>> > ---
On 27/09/2017 18:12, Diego Dorta wrote:
> When compiling with W=1 the following warning is observed:
>
> board/freescale/mx6sabresd/mx6sabresd.c:586:5: warning: no previous prototype
> for ‘board_ehci_hcd_init’ [-Wmissing-prototypes] int board_ehci_hcd_init(int
> port)
>
> Remove this warning b
On 27/09/2017 18:12, Diego Dorta wrote:
> When compiling with W=1 the following warning is observed:
>
> board/freescale/mx6sabresd/mx6sabresd.c:680:5: warning: no previous prototype
> for ‘board_spi_cs_gpio’ [-Wmissing-prototypes] int board_spi_cs_gpio(unsigned
> bus, unsigned cs)
>
> Remove t
On 27/09/2017 18:12, Diego Dorta wrote:
> When compiling with W=1 the following warning is observed:
>
> board/freescale/mx6sabresd/mx6sabresd.c:601:5: warning: no previous prototype
> for ‘board_ehci_power’ [-Wmissing-prototypes] int board_ehci_power(int port,
> int on)
>
> Remove this warning
On 27/09/2017 20:00, Fabio Estevam wrote:
> CONFIG_CMD_BOOTZ symbol does not work in board config file
> anymore, so fix this by moving it to Kconfig.
>
> Signed-off-by: Fabio Estevam
> ---
> configs/mx7ulp_evk_defconfig | 1 +
> include/configs/mx7ulp_evk.h | 1 -
> 2 files changed, 1 insertion
On 27/09/2017 18:12, Diego Dorta wrote:
> When compiling with W=1 the following warning is observed:
>
> arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for
> ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void)
>
> Fix the build warning by including .
>
> Si
Hi Stefano,
On 10/02/2017 06:21 AM, Stefano Babic wrote:
On 31/08/2017 00:13, Eric Nelson wrote:
This adds support for two additional boot modes on the i.MX7D SoC, which
is most useful when doing U-Boot development on this chip.
1. "bmode usb" can be used to force the ROM boot loader's serial
Hi Uri,
On 24/09/2017 15:32, Fabio Estevam wrote:
> Hi Uri,
>
> On Sun, Sep 24, 2017 at 3:00 AM, Uri Mashiach
> wrote:
>> Add configuration file and spl_boot_device function for the i.MX7 SPL.
>>
>> Signed-off-by: Uri Mashiach
>
> Thanks for working on this!
>
> I will test your series and wi
On Mon, Oct 2, 2017 at 11:22 AM, Stefano Babic wrote:
> Hi Uri,
>
> On 24/09/2017 15:32, Fabio Estevam wrote:
>> Hi Uri,
>>
>> On Sun, Sep 24, 2017 at 3:00 AM, Uri Mashiach
>> wrote:
>>> Add configuration file and spl_boot_device function for the i.MX7 SPL.
>>>
>>> Signed-off-by: Uri Mashiach
>>
Hi Stefano,
On Mon, Oct 2, 2017 at 11:22 AM, Stefano Babic wrote:
> It looks like that at least a define is missing - by applying the patch
> and testing, I get the error:
>
> +board/compulab/cl-som-imx7/cl-som-imx7.c: In function
> 'cl_som_imx7_setup_fec':
> +board/compulab/cl-som-imx7/cl-som-i
On 02/10/2017 16:19, Eric Nelson wrote:
> Hi Stefano,
>
> On 10/02/2017 06:21 AM, Stefano Babic wrote:
>> On 31/08/2017 00:13, Eric Nelson wrote:
>>> This adds support for two additional boot modes on the i.MX7D SoC, which
>>> is most useful when doing U-Boot development on this chip.
>>>
>>> 1. "
Hi Stefano,
On 10/02/2017 05:22 PM, Stefano Babic wrote:
Hi Uri,
On 24/09/2017 15:32, Fabio Estevam wrote:
Hi Uri,
On Sun, Sep 24, 2017 at 3:00 AM, Uri Mashiach
wrote:
Add configuration file and spl_boot_device function for the i.MX7 SPL.
Signed-off-by: Uri Mashiach
Thanks for working o
Hi Otavio, Fabio,
On 02/10/2017 16:25, Otavio Salvador wrote:
> On Mon, Oct 2, 2017 at 11:22 AM, Stefano Babic wrote:
>> Hi Uri,
>>
>> On 24/09/2017 15:32, Fabio Estevam wrote:
>>> Hi Uri,
>>>
>>> On Sun, Sep 24, 2017 at 3:00 AM, Uri Mashiach
>>> wrote:
Add configuration file and spl_boot_d
Hi Uri,
On 02/10/2017 16:59, Uri Mashiach wrote:
> Hi Stefano,
>
> On 10/02/2017 05:22 PM, Stefano Babic wrote:
>> Hi Uri,
>>
>> On 24/09/2017 15:32, Fabio Estevam wrote:
>>> Hi Uri,
>>>
>>> On Sun, Sep 24, 2017 at 3:00 AM, Uri Mashiach
>>> wrote:
Add configuration file and spl_boot_device
On 24/09/2017 08:00, Uri Mashiach wrote:
> This patch series adds support for CompuLab CL-SOM-iMX7, SBC-iMX7,
> SBC-IOT-iMX7
> and IOT-GATE-iMX7.
>
> CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
> NXP i.MX7 processor family.
>
> SBC-iMX7 is a single board computer, implemented with
Le 02/10/2017 à 15:53, Tom Rini a écrit :
On Mon, Oct 02, 2017 at 03:24:01PM +0200, Guillaume Gardet wrote:
Hi,
commit 46f9ef18461609064a1ffbc3f61dc027ec76b3ff
Author: Andrew F. Davis
Date: Fri Apr 21 10:01:28 2017 -0500
Kconfig: Enable FIT support by default for TI platforms
A
On Mon, Oct 02, 2017 at 05:55:27PM +0200, Guillaume Gardet wrote:
>
>
> Le 02/10/2017 à 15:53, Tom Rini a écrit :
> >On Mon, Oct 02, 2017 at 03:24:01PM +0200, Guillaume Gardet wrote:
> >>Hi,
> >>
> >>commit 46f9ef18461609064a1ffbc3f61dc027ec76b3ff
> >>Author: Andrew F. Davis
> >>Date: Fri Apr
Le 02/10/2017 à 17:58, Tom Rini a écrit :
On Mon, Oct 02, 2017 at 05:55:27PM +0200, Guillaume Gardet wrote:
Le 02/10/2017 à 15:53, Tom Rini a écrit :
On Mon, Oct 02, 2017 at 03:24:01PM +0200, Guillaume Gardet wrote:
Hi,
commit 46f9ef18461609064a1ffbc3f61dc027ec76b3ff
Author: Andrew F. Davi
Previous I've added these two definitions to use u-boot witht he
raspberry pi, into include/configs/rpi.h
#define CONFIG_SYS_MAXARGS 32 /* dch doubled from 16 */
#define CONFIG_SYS_BARGSIZE 1540 /* dch added, default 512 */
However on the most recent master,
On Sun, Oct 01, 2017 at 08:41:36PM +0200, Marek Vasut wrote:
> The following changes since commit 6e9b109aa9bcdd094e77da9fb03de8b44da8eb9d:
>
> Merge git://git.denx.de/u-boot-usb (2017-09-27 09:39:48 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-usb.git mas
On Sun, Oct 01, 2017 at 05:34:55PM +, Antony Antony wrote:
> On Mon, Sep 25, 2017 at 01:12:23PM +0200, Maxime Ripard wrote:
> > On Sat, Sep 23, 2017 at 05:59:15PM +, Antony Antony wrote:
> > > Add initial DT for NanoPi NEO Plus2 by FriendlyARM
> > > - Allwinner quad core H5 Cortex A53 with
On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark wrote:
> From: Peter Jones
>
> EFI client programs need the signature information from the partition
> table to determine the disk a partition is on, so we need to fill that
> in here.
>
> Signed-off-by: Peter Jones
> [separated from efi_loader part, an
From: Fabio Estevam
Latest wandboard hardware revision is revd1, which brings the following
new features:
- PFUZE100 PMIC
- AR8035 Ethernet PHY
- Upgrade Wifi/BT chip to BCM4339/BCM43430.
The detection mechanism is to probe the PMIC and when it is
found, then the revision of the board is revd1.
From: Fabio Estevam
Add support for the latest MX6QP wandboard variant.
Based on Richard Hu's work from Technexion's U-Boot tree.
Signed-off-by: Fabio Estevam
---
Changes since v3:
- Rebased against latest u-boot-imx
arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
board/wandboard/spl.c
On Mon, Oct 2, 2017 at 7:17 PM, Fabio Estevam wrote:
> On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark wrote:
>> From: Peter Jones
>>
>> EFI client programs need the signature information from the partition
>> table to determine the disk a partition is on, so we need to fill that
>> in here.
>>
>> Si
On Mon, Oct 2, 2017 at 3:49 PM, Peter Robinson wrote:
> That would explain what I'm seeing as we pull this patch set in to
> 2017.09 for EFI boot support on aarch64 platforms.
Locally I am applying the following hack, so that I can continue to
work on mx6 with SPL:
https://pastebin.com/MX8tK76X
On Mon, Oct 02, 2017 at 04:02:37PM -0300, Fabio Estevam wrote:
> On Mon, Oct 2, 2017 at 3:49 PM, Peter Robinson wrote:
>
> > That would explain what I'm seeing as we pull this patch set in to
> > 2017.09 for EFI boot support on aarch64 platforms.
>
> Locally I am applying the following hack, so
UART pinmux has been changed on the last board revision. Change
board pinmux accordingly. Console is on UART7 now, add pinmux,
base address and update console string in environment.
Signed-off-by: Anatolij Gustschin
---
board/ccv/xpress/xpress.c | 14 ++
include/configs/xpress.h |
On Mon, Oct 2, 2017 at 2:17 PM, Fabio Estevam wrote:
> On Wed, Sep 13, 2017 at 7:05 PM, Rob Clark wrote:
>> From: Peter Jones
>>
>> EFI client programs need the signature information from the partition
>> table to determine the disk a partition is on, so we need to fill that
>> in here.
>>
>> Si
Hi Tom,
On Fri, Sep 29, 2017 at 12:52:47PM +, Tom Rini wrote:
> On Fri, Sep 29, 2017 at 02:37:55PM +0200, Maxime Ripard wrote:
> > Hi,
> >
> > On Thu, Sep 28, 2017 at 01:02:58PM +, Tom Rini wrote:
> > > On Thu, Sep 28, 2017 at 11:12:55AM +0200, Maxime Ripard wrote:
> > >
> > > > Hi Tom,
On Mon, Oct 02, 2017 at 10:44:31PM +0200, Maxime Ripard wrote:
> Hi Tom,
>
> On Fri, Sep 29, 2017 at 12:52:47PM +, Tom Rini wrote:
> > On Fri, Sep 29, 2017 at 02:37:55PM +0200, Maxime Ripard wrote:
> > > Hi,
> > >
> > > On Thu, Sep 28, 2017 at 01:02:58PM +, Tom Rini wrote:
> > > > On Thu,
On Fri, Sep 29, 2017 at 10:25 PM, Tom Rini wrote:
> On Tue, Sep 19, 2017 at 12:52:55PM +0200, Ulf Magnusson wrote:
>
>> Corresponds to 375506d (File writing nit) from upstream
>> (https://github.com/ulfalizer/Kconfiglib).
>>
>> Adds proper 'imply' support and fixes a few minor issues, one of which
On Sat, Sep 30, 2017 at 10:56:22PM -0700, Bin Meng wrote:
> Ignore these generated files during the build of dtc.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
Hey all,
So it's release day and I've put up v2017.11-rc1. The merge window is
now closed and I've updated git and the tarballs are also up now.
I think my patch queue is in OK shape currently, but I need to
pick up a number of series that were posted in the middle of September
and look to be go
Hi Tom,
On Mon, Oct 2, 2017 at 4:32 PM, Tom Rini wrote:
> FWIW, on cubox the current status is looping, and your kludge I just get
> no output :( But there may be some other problems here too as I'm
Just tried it on 2017.11-rc1 plus the attached hack and it boots fine:
U-Boot SPL 2017.11-rc1-
From: Fabio Estevam
Since commit ff98cb90514d ("part: extract MBR signature from partitions")
SPL boot on i.MX6 starts to fail:
U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 15:13:19)
Trying to boot from MMC1
(hangs here)
Revert the part_test_dos() changes from this commit, so that
SPL boot
Hi Rob,
On Mon, Oct 2, 2017 at 4:35 PM, Rob Clark wrote:
> not sure to what extent debug()/printf() works from SPL, but if it
> does maybe adding this patch with and without that commit and
> comparing logs would give some hint:
Unfortunately I don't get any logs with this debug patch.
> I don
On Mon, Oct 2, 2017 at 1:34 AM, Antony Antony wrote:
> Hi Maxime,
>
> sorry for the delayed response.
>
> On Mon, Sep 25, 2017 at 01:12:23PM +0200, Maxime Ripard wrote:
>> On Sat, Sep 23, 2017 at 05:59:15PM +, Antony Antony wrote:
>> > Add initial DT for NanoPi NEO Plus2 by FriendlyARM
>> > -
We should use the existing 64bit division instead of
reinventing the wheel.
Signed-off-by: Heinrich Schuchardt
---
The patch is based on v2017.11-rc1 with no other patches applied.
Applying it will require rebasing
[PATCH 1/1] efi_loader: provide function comments for boot services
https://patch
On Mon, Oct 2, 2017 at 6:06 PM, Chee, Tien Fong
wrote:
> On Isn, 2017-10-02 at 12:04 +0200, Marek Vasut wrote:
>> On 10/02/2017 12:01 PM, Chee, Tien Fong wrote:
>> >
>> > On Sel, 2017-09-26 at 12:33 +0200, Marek Vasut wrote:
>> > >
>> > > On 09/26/2017 10:20 AM, Chee, Tien Fong wrote:
>> > > >
>>
As the timer 2 is on APB1 bus, the maximum of clock frequency of APB1 timer
clock is half of SYSCLK. Then to calculate the timer prescaler for timer 2
which need to be divided by 2.
Signed-off-by: Bo Shen
---
arch/arm/mach-stm32/stm32f7/timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(
73 matches
Mail list logo
