Hi Stefano,
On 10/02/2017 06:21 AM, Stefano Babic wrote:
On 31/08/2017 00:13, Eric Nelson wrote:
This adds support for two additional boot modes on the i.MX7D SoC, which
is most useful when doing U-Boot development on this chip.
1. "bmode usb" can be used to force the ROM boot loader's serial
2. "bmode normal" can be used to revert to the normal boot mode
as specified by fuses and BOOT_MODE pins
Signed-off-by: Eric Nelson <e...@nelint.com>
---
V2 adds "normal" mode as suggested by Troy Kisky
arch/arm/mach-imx/mx7/soc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 87bf105..15be42a 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -372,6 +372,9 @@ void set_wdog_reset(struct wdog_regs *wdog)
* to SBMR1, which will determine the boot device.
*/
const struct boot_mode soc_boot_modes[] = {
+ {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
+ {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
+
{"ecspi1:0", MAKE_CFGVAL(0x00, 0x60, 0x00, 0x00)},
{"ecspi1:1", MAKE_CFGVAL(0x40, 0x62, 0x00, 0x00)},
{"ecspi1:2", MAKE_CFGVAL(0x80, 0x64, 0x00, 0x00)},
Sorry, it was for a long time in the queue - discussion in thread is
spreading away from the original review (I had errouneosly set it to
Changes requested).
Applied to u-boot-imx, -master, thanks !
Sorry, but we rejected this patch (because it doesn't work).
https://patchwork.ozlabs.org/patch/807934/
Regards,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
