Hi Jagan,
On 19/09/2017 20:37, Jagan Teki wrote:
> From: Jagan Teki <ja...@amarulasolutions.com>
>
> This series add OF_CONTROL support for SPL on Engicam i.MX6QDL
> boards, along with proper code optimzation changes.
>
>
> Jagan Teki (6):
> i.MX6: engicam: Fix MAINTAINERS/README
> imx6ul: geam6ul/isiot: Fix to MMC devices
> i.MX6: engicam: Move set_fdt_file to common
> i.MX6Q: icorem6: Move spl load fit to common/spl
> i.MX6Q: icore: Add SPL_OF_CONTROL support
> i.MX6Q: icore: Add imx6q board for icore/icore_rqs
>
> arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 +
> arch/arm/dts/imx6qdl-icore.dtsi | 2 +
> arch/arm/dts/imx6qdl.dtsi | 5 +
> arch/arm/mach-imx/mx6/Kconfig | 24 +--
> board/engicam/common/board.c | 24 +++
> board/engicam/common/board.h | 1 -
> board/engicam/common/spl.c | 16 ++
> board/engicam/geam6ul/MAINTAINERS | 2 +-
> board/engicam/geam6ul/geam6ul.c | 6 -
> board/engicam/icorem6/README | 33 ----
> board/engicam/icorem6_rqs/Kconfig | 12 --
> board/engicam/icorem6_rqs/MAINTAINERS | 9 --
> board/engicam/icorem6_rqs/Makefile | 6 -
> board/engicam/icorem6_rqs/icorem6_rqs.c | 171
> ---------------------
> board/engicam/{icorem6 => imx6q}/Kconfig | 2 +-
> board/engicam/{icorem6 => imx6q}/MAINTAINERS | 10 +-
> board/engicam/{icorem6 => imx6q}/Makefile | 2 +-
> board/engicam/{icorem6_rqs => imx6q}/README | 12 +-
> board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} | 108 +++----------
> board/engicam/isiotmx6ul/MAINTAINERS | 2 +-
> board/engicam/isiotmx6ul/isiotmx6ul.c | 11 --
> configs/imx6qdl_icore_mmc_defconfig | 1 +
> configs/imx6qdl_icore_rqs_defconfig | 3 +-
> configs/imx6ul_geam_mmc_defconfig | 1 -
> configs/imx6ul_isiot_emmc_defconfig | 1 -
> configs/imx6ul_isiot_mmc_defconfig | 1 -
> include/configs/imx6-engicam.h | 22 +--
> 27 files changed, 112 insertions(+), 377 deletions(-)
> delete mode 100644 board/engicam/icorem6/README
> delete mode 100644 board/engicam/icorem6_rqs/Kconfig
> delete mode 100644 board/engicam/icorem6_rqs/MAINTAINERS
> delete mode 100644 board/engicam/icorem6_rqs/Makefile
> delete mode 100644 board/engicam/icorem6_rqs/icorem6_rqs.c
> rename board/engicam/{icorem6 => imx6q}/Kconfig (87%)
> rename board/engicam/{icorem6 => imx6q}/MAINTAINERS (51%)
> rename board/engicam/{icorem6 => imx6q}/Makefile (80%)
> rename board/engicam/{icorem6_rqs => imx6q}/README (68%)
> rename board/engicam/{icorem6/icorem6.c => imx6q/imx6q.c} (73%)
>
I cannot build your boards when I apply the patchset
(CONFIG_SYS_FSL_ESDHC_ADDR is away now):
Building current source for 8 boards (8 threads, 1 job per thread)
arm: + imx6ul_isiot_emmc
+drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init':
+drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR'
undeclared (first use in this function)
+ cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+ ^
+drivers/mmc/fsl_esdhc.c:934:20: note: each undeclared identifier is
reported only once for each function it appears in
+make[4]: *** [spl/drivers/mmc/fsl_esdhc.o] Error 1
+make[3]: *** [spl/drivers/mmc] Error 2
+make[2]: *** [spl/drivers] Error 2
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
arm: + imx6ul_geam_mmc
+drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init':
+drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR'
undeclared (first use in this function)
+ cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+ ^
+drivers/mmc/fsl_esdhc.c:934:20: note: each undeclared identifier is
reported only once for each function it appears in
+make[4]: *** [spl/drivers/mmc/fsl_esdhc.o] Error 1
+make[3]: *** [spl/drivers/mmc] Error 2
+make[2]: *** [spl/drivers] Error 2
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
arm: + imx6ul_isiot_mmc
+drivers/mmc/fsl_esdhc.c: In function 'fsl_esdhc_mmc_init':
+drivers/mmc/fsl_esdhc.c:934:20: error: 'CONFIG_SYS_FSL_ESDHC_ADDR'
undeclared (first use in this function)
+ cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
Could you take a look, please ?
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
