SPL partition size depends on sector size and we want kernel to use
the same layout, so let U-Boot modify FDT accordingly.
Signed-off-by: Ladislav Michl
---
Changes:
-v2 rebased against current git as it no longer applies
board/isee/igep00x0/igep00x0.c | 17 +
configs/igep0020_
On Sat, Jan 14, 2017 at 02:06:09AM +, Andre Przywara wrote:
> The OrangePi Zero can happily use the EMAC along with its integrated
> PHY to use Ethernet (for TFTP booting, for instance).
> Add the emac node to the board .dts by copying it from the OrangePi One
> DT.
>
> Signed-off-by: Andre Pr
On Sat, Jan 14, 2017 at 02:06:10AM +, Andre Przywara wrote:
> Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
> which the board can actually boot from.
> Enable the SPL support for the SPI controller and SPI flash to allow
> putting the SPL, the DT and U-Boot proper int
Hi,
I've observed the CMD_ERR in U-Boot while accessing SD with boot from
eMMC on i.MX6 board.
SPL initializing SD as well eMMC controllers
a) On SD bootmode: from u-boot prompt mmc dev 0 and mmc dev 1 is
getting probe SD and eMMC
b) On eMMC bootmode: from u-boot prompt mmc dev 0 is returning wit
Miniarm is the internal project code. Now it is officially named Tinker board.
So rename it.
Signed-off-by: Eddie Cai
---
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/rk3288-miniarm.dts| 58 ---
arch/arm/dts/rk3288-miniarm.dtsi | 521 --
On Fri, Jan 13, 2017 at 01:29:58AM +, Andre Przywara wrote:
> Addresses passed on to readl and writel are expected to be of the same
> size as a pointer. Change the parameter types of sunxi_spi0_read_data()
> to make the compiler happy and allow a warning-free aarch64 compile.
>
> Signed-off-b
On Sat, 2017-01-14 at 10:06 -0700, Simon Glass wrote:
> Hi Joakim,
>
> On 14 January 2017 at 04:51, Bin Meng wrote:
> > +Simon,
> >
> > On Fri, Jan 13, 2017 at 4:12 AM, Joakim Tjernlund
> > wrote:
> > > I found two repos w.r.t x86_64 for u-boot, which one should I use?
> > >
> >
> > U-Boot x8
On Sunday 15 January 2017 05:04 PM, Maxime Ripard wrote:
On Sat, Jan 14, 2017 at 02:06:09AM +, Andre Przywara wrote:
The OrangePi Zero can happily use the EMAC along with its integrated
PHY to use Ethernet (for TFTP booting, for instance).
Add the emac node to the board .dts by copying it fr
On Sunday 15 January 2017 05:04 PM, Maxime Ripard wrote:
On Sat, Jan 14, 2017 at 02:06:10AM +, Andre Przywara wrote:
Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
which the board can actually boot from.
Enable the SPL support for the SPI controller and SPI flash to
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit 7f73ca484f792a0d2a7ee09860c32f3d02b3030d:
Kconfig: CONFIG_OF_PLATDATA doesn't really exist (2017-01-14 12:20:23 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you
Hi Tom,
Please take this PR.
thanks!
Jagan.
The following changes since commit 70c1e0474a9df2c4493b4e2330cc41d3132b4e90:
Merge git://git.denx.de/u-boot-rockchip (2017-01-12 21:20:51 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-spi.git master
for you to fetch c
On Fri, Dec 23, 2016 at 07:51:53AM +0100, Stefan Agner wrote:
> From: Stefan Agner
>
> Add a new top-level config option so support booting an image stored
> in RAM. This allows to move the RAM boot support into a sparate file
> and having a single condition to compile that file.
>
> Signed-off
On Tue, Dec 27, 2016 at 11:19:43AM +0200, Oded Gabbay wrote:
> Using CONFIG_IS_ENABLED() doesn't work in SPL. This patch replaces the only
> occurrence of CONFIG_IS_ENABLED() in start.S to a regular #if defined().
> It also adds "&& !defined(CONFIG_SPL_BUILD)" to that #if statement because
> the s
On Fri, Dec 23, 2016 at 07:51:52AM +0100, Stefan Agner wrote:
> From: Stefan Agner
>
> This converts the following to Kconfig:
> CONFIG_SPL_RAM_DEVICE
>
> Signed-off-by: Stefan Agner
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Wed, Dec 28, 2016 at 12:36:00AM +0900, Masahiro Yamada wrote:
> The include/common.h is a collection of unrelated declarations,
> macros, etc.
>
> It is horrible to include such a cluttered header just for some
> timer functions. Split out timer functions into include/time.h.
>
> Signed-off-
On Wed, Dec 28, 2016 at 12:35:59AM +0900, Masahiro Yamada wrote:
> Currently, mdelay() and udelay() are declared in include/common.h,
> while ndelay() in include/linux/compat.h. It would be nice to
> collect them into include/linux/delay.h like Linux.
>
> While we are here, fix the ndelay() impl
On Wed, Dec 28, 2016 at 12:36:02AM +0900, Masahiro Yamada wrote:
> It is not safe to compare timer values directly.
>
> On 32-bit systems, for example, timer_get_us() wraps around every
> 72 min. (2 ^ 32 / 100 =~ 4295 sec =~ 72 min). Depending on
> the get_ticks() implementation, it may wrap
On Wed, Dec 28, 2016 at 12:36:03AM +0900, Masahiro Yamada wrote:
> This was imported from Linux 4.9 and adjusted for U-Boot.
>
> - Replace the license block with SPDX
> - Drop all *_atomic variants, which make no sense for U-Boot
> - Remove the sleep_us argument, which makes no sense for U-Boo
On Wed, Dec 28, 2016 at 01:38:35PM +0200, Oded Gabbay wrote:
> When using ARMv8 with ARMV8_SPIN_TABLE=y, we want the slave cores to
> wait on spin_table_cpu_release_addr, until the Linux kernel will "wake" them
> by writing to that location. The address of spin_table_cpu_release_addr is
> transfer
On Wed, Dec 28, 2016 at 12:36:01AM +0900, Masahiro Yamada wrote:
> Copied from Linux 4.9.
>
> Signed-off-by: Masahiro Yamada
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists
On Wed, Jan 04, 2017 at 01:36:26PM +1300, Chris Packham wrote:
> Ensure '.' is used to separate octets. If another character is seen
> reject the string outright and return 0.0.0.0.
>
> Signed-off-by: Chris Packham
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital
On Mon, Jan 02, 2017 at 04:32:13PM -0500, Robert P. J. Day wrote:
> Some refactoring of the top-level Kconfig file which includes:
>
> * using "if" to remove numerous identical dependency tests
> * reordering config entries to group related ones
> * spelling and grammar fixes
>
> There should be
On Wed, Jan 04, 2017 at 01:36:25PM +1300, Chris Packham wrote:
> Previously values greater than 255 were implicitly truncated. Add some
> stricter checking to reject addresses with components >255.
>
> With the input "1234192.168.1.1" the old behaviour would truncate the
> address to 192.168.1.1.
On Thu, Jan 05, 2017 at 04:16:36AM +0100, Emmanuel Vadot wrote:
> Set CONFIG_SYS_MMC_MAX_DEVICE to 2 for am335x SoC.
> This define is needed in the API code.
>
> Signed-off-by: Emmanuel Vadot
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Wed, Jan 04, 2017 at 09:26:43AM -0600, Adam Ford wrote:
> Since we're including ti_armv7_common, let's pull in DEFAULT_LINUX_BOOT_ENV
> and remove unnecessary duplicative definitions. This patch also renames a
> few environmental variables to match what is inside ti_armv7_common. This
> should
On Fri, Jan 06, 2017 at 04:32:12PM -0600, Andrew F. Davis wrote:
> The SPL load address changes based on boot type in HS devices,
> ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs
> for similar reasons. Add this same logic for AM33xx devices.
>
> Also make the default value for I
On Fri, Jan 06, 2017 at 01:14:17PM -0600, George McCollister wrote:
> Add support for signing with the pkcs11 engine. This allows FIT images
> to be signed with keys securely stored on a smartcard, hardware security
> module, etc without exposing the keys.
>
> Support for other engines can be add
On Fri, Jan 06, 2017 at 04:23:59PM -0600, Andrew F. Davis wrote:
> Make building EFI example less noisy.
>
> Signed-off-by: Andrew F. Davis
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Sun, Jan 08, 2017 at 07:11:27PM +0100, Mark Kettenis wrote:
> Using \n in a substitution is a GNU extension. Use the 'G" command instead
> to insert the desired line.
>
> Signed-off-by: Mark Kettenis
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Mon, Jan 09, 2017 at 11:06:38AM +0100, Fabien Parent wrote:
> Small clean-up.
>
> Signed-off-by: Fabien Parent
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing lis
On Mon, Jan 09, 2017 at 11:06:36AM +0100, Fabien Parent wrote:
> Right now the SPL is trying to load u-boot based on defines, i.e. one
> has to define CONFIG_SPL_NAND_SIMPLE to boot from NAND,
> or CONFIG_SPL_SPI_LOAD to boot from SPI FLASH, etc...
> This prevent us from having a single SPL image
On Mon, Jan 09, 2017 at 11:06:37AM +0100, Fabien Parent wrote:
> Enable SPL MMC support in order to allow to build a single u-boot image
> that is able to boot from MMC and NAND devices.
>
> Signed-off-by: Fabien Parent
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signa
On Mon, Jan 09, 2017 at 11:15:14AM +0100, Ladislav Michl wrote:
> Replace hardcoded value with defined constant SECTOR_BYTES.
>
> Signed-off-by: Ladislav Michl
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
On Mon, Jan 09, 2017 at 11:31:43AM +0100, Ladislav Michl wrote:
> Boards with NAND and OneNAND are supported by single configuration,
> thus remove now obsolete IGEP0020_NAND BOARD entry.
>
> Signed-off-by: Ladislav Michl
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: D
On Mon, Jan 09, 2017 at 11:21:06AM +0100, Ladislav Michl wrote:
> SPL partition size depends on sector size and we want kernel to use
> the same layout, so let U-Boot modify FDT accordingly.
>
> Signed-off-by: Ladislav Michl
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description
On Mon, Jan 09, 2017 at 11:24:51AM -0700, Simon Glass wrote:
> From: Meng Yi
>
> Unfortunately version 2 of this patch was applied which was missing some
> changes. Fix this.
>
> Signed-off-by: Meng Yi
> Acked-by: Simon Glass
> Signed-off-by: Simon Glass
Applied to u-boot/master, thanks!
-
On Wed, Jan 11, 2017 at 04:51:53PM +0100, Gary Bisson wrote:
> Since commit aa6ab905b2, sata_initialize returns -1 if init_sata or
> scan_sata fails. But this return value becomes the do_sata return
> value which is equivalent to CMD_RET_USAGE.
>
> In case one issues 'sata init' and that the hard
On Wed, Jan 11, 2017 at 10:19:52AM -0600, Andrew F. Davis wrote:
> On AM33xx devices the secure ROM uses a different call index for
> signature verification, the function and arguments are the same.
>
> Signed-off-by: Andrew F. Davis
Applied to u-boot/master, thanks!
--
Tom
signature.asc
De
On Wed, Jan 11, 2017 at 11:09:27AM -0600, Andrew F. Davis wrote:
> Changes involving High-Security boards should be CC'd for additional
> assessment of the security implications.
>
> Signed-off-by: Andrew F. Davis
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital s
On Wed, Jan 11, 2017 at 10:28:08AM -0600, Andrew F. Davis wrote:
> This allows us to specify a FIT configuration that will automatically
> use the correct images from the FIT blob.
>
> Signed-off-by: Andrew F. Davis
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital
On Wed, Jan 11, 2017 at 6:09 PM, Andrew F. Davis wrote:
> Changes involving High-Security boards should be CC'd for additional
> assessment of the security implications.
>
> Signed-off-by: Andrew F. Davis
> ---
> Recently some fastboot additions have been made that may effect security
> on our HS
Use the generic "distro" boot framework to enable automatic DHCP boot.
The fdt and kernel addresses are adopted from downstream; ramdisk and
scriptaddr addresses were chosen arbitrarily.
Signed-off-by: Andreas Färber
---
Kconfig | 1 +
configs/odroid-c2_defconfig
On Sun, Jan 15, 2017 at 07:50:35PM +0100, Jagan Teki wrote:
> On Wed, Jan 11, 2017 at 6:09 PM, Andrew F. Davis wrote:
> > Changes involving High-Security boards should be CC'd for additional
> > assessment of the security implications.
> >
> > Signed-off-by: Andrew F. Davis
> > ---
> > Recently s
Use the generic "distro" boot framework to enable automatic DHCP boot.
The fdt and kernel addresses are adopted from downstream; ramdisk and
scriptaddr addresses were chosen arbitrarily.
Signed-off-by: Andreas Färber
---
Kconfig | 1 +
configs/odroid-c2_defconfig
Move it from meson-gxbb-common.h to odroid-c2.h to allow new boards not
to implement it.
Signed-off-by: Andreas Färber
---
include/configs/meson-gxbb-common.h | 1 -
include/configs/odroid-c2.h | 2 ++
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/meson-gx
On 15/01/2017 19:52, Andreas Färber wrote:
Use the generic "distro" boot framework to enable automatic DHCP boot.
The fdt and kernel addresses are adopted from downstream; ramdisk and
scriptaddr addresses were chosen arbitrarily.
Signed-off-by: Andreas Färber
---
Kconfig
Hi All,
I updated one of my two RK3288 boards (Viewsonic) with newer Android
factory firmware (using Windows) and now it won't boot mainline u-boot
when I use the same exact recipe that worked previously:
sudo ${UPGD} db rkbin/rk32/rk3288_boot.bin
sudo ${UPGD} wl 0x40 tftpboot/u-boot-dtb.bin
Am 15.01.2017 um 20:03 schrieb Alexander Graf:
> On 15/01/2017 19:52, Andreas Färber wrote:
>> Use the generic "distro" boot framework to enable automatic DHCP boot.
>>
>> The fdt and kernel addresses are adopted from downstream; ramdisk and
>> scriptaddr addresses were chosen arbitrarily.
>>
>> Si
Use the generic "distro" boot framework to enable automatic DHCP boot.
MMC and USB are not yet implemented, so this is the only boot option.
The fdt and kernel addresses are adopted from downstream; ramdisk and
scriptaddr addresses were chosen arbitrarily.
Signed-off-by: Andreas Färber
---
Kcon
> Am 15.01.2017 um 20:20 schrieb Andreas Färber :
>
>> Am 15.01.2017 um 20:03 schrieb Alexander Graf:
>>> On 15/01/2017 19:52, Andreas Färber wrote:
>>> Use the generic "distro" boot framework to enable automatic DHCP boot.
>>>
>>> The fdt and kernel addresses are adopted from downstream; ramdi
On Sun, Jan 15, 2017 at 01:04:31PM +0100, Ladislav Michl wrote:
> SPL partition size depends on sector size and we want kernel to use
> the same layout, so let U-Boot modify FDT accordingly.
>
> Signed-off-by: Ladislav Michl
> ---
> Changes:
> -v2 rebased against current git as it no longer app
> Am 15.01.2017 um 20:22 schrieb Andreas Färber :
>
> Use the generic "distro" boot framework to enable automatic DHCP boot.
> MMC and USB are not yet implemented, so this is the only boot option.
>
> The fdt and kernel addresses are adopted from downstream; ramdisk and
> scriptaddr addresses w
From: Jagan Teki
Add FEC node for Engicam Is.IoT MX6UL module.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
arch/arm/dts/imx6ul-isiot.dts | 22 ++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/dts
From: Jagan Teki
This patch set support Engicam Is.IoT MX6UL board support.
Jagan Teki (10):
configs: imx6: Don't define USDHC2_BASE_ADDR
arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
arm: dts: imx6ul-isiot: Add I2C nodes
imx6: isiotmx6ul: Add I2C support
arm: dts:
From: Jagan Teki
USDHC base address will assigned by SPL using fsl_esdhc_initialize
and u-boot with devicetree, hence no remove base address assignment
in config files.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
include/conf
From: Jagan Teki
Add I2C nodes for Engicam Is.IoT MX6UL module.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
arch/arm/dts/imx6ul-isiot.dts | 28
1 file changed, 28 insertions(+)
diff --git a/arch/
From: Jagan Teki
Boot from MMC:
-
U-Boot SPL 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33)
Trying to boot from MMC1
U-Boot 2017.01-rc2-gba3c151-dirty (Jan 02 2017 - 16:59:33 +0100)
CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU: Industrial temperature grade
From: Jagan Teki
Add FEC support for Engicam Is.IoT MX6UL module.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
arch/arm/cpu/armv7/mx6/Kconfig | 1 +
configs/imx6ul_isiot_mmc_defconfig | 3 +++
include/configs/imx6ul_isio
From: Jagan Teki
Add usdhc2 node, which is eMMC for Engicam Is.IoT MX6UL modules.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
arch/arm/dts/imx6ul-isiot.dts | 25 +
1 file changed, 25 insertions(+)
From: Jagan Teki
Add config options for booting Linux from NAND in UBI format.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
configs/imx6ul_isiot_nand_defconfig | 1 +
include/configs/imx6ul_isiot.h | 32 +
From: Jagan Teki
Enable I2C support for Engicam Is.IoT NAND module.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
configs/imx6ul_isiot_nand_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/imx6ul_isiot_na
From: Jagan Teki
Add I2C support for Engicam Is.IoT MX6UL module.
isiotmx6ul> i2c bus
Bus 0: i2c@021a
Bus 1: i2c@021a4000
isiotmx6ul> i2c dev 0
Setting bus to 0
isiotmx6ul> i2c dev
Current bus is 0
isiotmx6ul> i2c speed 10
Setting bus speed to 10 Hz
isiotmx6ul> i2c probe
Valid chip
From: Jagan Teki
Add NAND support for Engicam Is.IoT MX6UL board.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
Changes for v2:
- Fix to enable DM_ETH
board/engicam/isiotmx6ul/MAINTAINERS | 1 +
board/engicam/isiotmx6ul/isiotmx6ul.c | 69 +
New function - configure_pcie_dpll() - has been added to allow setting up
the PCIe DPLL clock (1500 MHz).
Signed-off-by: Lukasz Majewski
---
arch/arm/cpu/armv7/omap-common/clocks-common.c | 22 ++
arch/arm/include/asm/omap_common.h | 2 ++
2 files changed, 24 ins
Those registers are necessary to generate and output the PCIe clock.
Signed-off-by: Lukasz Majewski
---
arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 ++
arch/arm/include/asm/omap_common.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c
b/arch/arm/cpu/ar
With this code only 19.2 HMz SYSCLK (input) frequency is supported on
dra7xx based SoCs.
Signed-off-by: Lukasz Majewski
---
arch/arm/cpu/armv7/omap5/hw_data.c | 12
arch/arm/include/asm/omap_common.h | 1 +
2 files changed, 13 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/hw
Some boards do require early adjustments (due to e.g. HW fix) in SPL code.
In this particular case such operations must be performed just before ANY
external IC is accessed (good example here is the I2C early bus access).
Signed-off-by: Lukasz Majewski
---
common/spl/Kconfig | 8
common
On 01/15/2017 11:46 PM, Lukasz Majewski wrote:
> Some boards do require early adjustments (due to e.g. HW fix) in SPL code.
> In this particular case such operations must be performed just before ANY
> external IC is accessed (good example here is the I2C early bus access).
Shouldn't such stuff be
Signed-off-by: Lukasz Majewski
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1ea7ae0..0e05c0e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -242,7 +242,7 @@ T: git git://git.denx.de/u-boot-coldfire.git
F: arch/m68k/
DF
Dear All,
> On 01/15/2017 11:46 PM, Lukasz Majewski wrote:
> > Some boards do require early adjustments (due to e.g. HW fix) in
> > SPL code. In this particular case such operations must be performed
> > just before ANY external IC is accessed (good example here is the
> > I2C early bus access).
>
Hi Tom.
2017-01-16 3:29 GMT+09:00 Tom Rini :
> On Tue, Dec 27, 2016 at 11:19:43AM +0200, Oded Gabbay wrote:
>
>> Using CONFIG_IS_ENABLED() doesn't work in SPL. This patch replaces the only
>> occurrence of CONFIG_IS_ENABLED() in start.S to a regular #if defined().
>> It also adds "&& !defined(CON
Hi Joakim,
On Mon, Jan 16, 2017 at 12:49 AM, Joakim Tjernlund
wrote:
> On Sat, 2017-01-14 at 10:06 -0700, Simon Glass wrote:
>> Hi Joakim,
>>
>> On 14 January 2017 at 04:51, Bin Meng wrote:
>> > +Simon,
>> >
>> > On Fri, Jan 13, 2017 at 4:12 AM, Joakim Tjernlund
>> > wrote:
>> > > I found two r
Hi Simon,
I met two issue when using of-platdata
1. compitable name with '.'
I get compile error as below:
In file included from include/dt-structs.h:16:0,
from spl/dts/dt-platdata.c:3:
include/generated/dt-structs.h:26:35: error: expected identifier or ‘(’
before numeric c
Hi Joakim,
On 15 January 2017 at 09:49, Joakim Tjernlund
wrote:
> On Sat, 2017-01-14 at 10:06 -0700, Simon Glass wrote:
>> Hi Joakim,
>>
>> On 14 January 2017 at 04:51, Bin Meng wrote:
>> > +Simon,
>> >
>> > On Fri, Jan 13, 2017 at 4:12 AM, Joakim Tjernlund
>> > wrote:
>> > > I found two repos
On 14 January 2017 at 10:21, Tom Rini wrote:
> There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename
> the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA.
>
> Signed-off-by: Tom Rini
> ---
> common/spl/spl.c | 2 +-
> drivers/serial/Kconfig | 2
+Kever
Hi Rick,
On 15 January 2017 at 12:05, Rick Bronson wrote:
> Hi All,
>
> I updated one of my two RK3288 boards (Viewsonic) with newer Android
> factory firmware (using Windows) and now it won't boot mainline u-boot
> when I use the same exact recipe that worked previously:
>
> sudo ${UPG
On Monday 16 January 2017 04:09 AM, Lukasz Majewski wrote:
> With this code only 19.2 HMz SYSCLK (input) frequency is supported on
> dra7xx based SoCs.
This wold be breaking dra74x-evm which has 20MHz sysclk.
May I know what is intention for configuring PCIE dpll in u-boot?(you
want to use PCIE
On Sun, Jan 15, 2017 at 06:27:14PM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 7f73ca484f792a0d2a7ee09860c32f3d02b3030d:
>
> Kconfig: CONFIG_OF_PLATDATA doesn't really exist (2017-01-14 12:20:23 -0500)
>
> are avail
On Sun, Jan 15, 2017 at 06:32:14PM +0100, Jagan Teki wrote:
> Hi Tom,
>
> Please take this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 70c1e0474a9df2c4493b4e2330cc41d3132b4e90:
>
> Merge git://git.denx.de/u-boot-rockchip (2017-01-12 21:20:51 -0500)
>
> are available in t
If there is a '.' in a compatible string, then dtoc will produce a struct
with a name containing a '.'. This won't work, so replace it with '_'.
Also add a suitable test to the sandbox device tree to catch this.
Signed-off-by: Simon Glass
---
arch/sandbox/dts/sandbox.dts | 5 +
tools/dtoc/
Hi Kever,
On 15 January 2017 at 18:28, Kever Yang wrote:
> Hi Simon,
>
> I met two issue when using of-platdata
>
> 1. compitable name with '.'
> I get compile error as below:
> In file included from include/dt-structs.h:16:0,
> from spl/dts/dt-platdata.c:3:
> include/generat
Hello,
I am looking to enable the Watchdog Timer on my Freescale iMX6 board and
I am following the documentation supplied by NXP which states as follows:
---
The following sequence should be performed for WDOG initialization.
• PDE bit of Watchdog Miscellaneous Control Register (WDOG_WMCR) sho
Hi Rick,
On 01/16/2017 10:50 AM, Simon Glass wrote:
+Kever
Hi Rick,
On 15 January 2017 at 12:05, Rick Bronson wrote:
Hi All,
I updated one of my two RK3288 boards (Viewsonic) with newer Android
factory firmware (using Windows) and now it won't boot mainline u-boot
when I use the same exa
Do not rely on CONFIG_SPL_OF_PLATDATA to build the libfdt python module.
If swig is present, this will be build
Signed-off-by: Emmanuel Vadot
---
tools/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/Makefile b/tools/Makefile
index 5b81dde4b0..a609d05859 100644
The built _libfdt.so is placed in the /tools dir and need to say here
as it contains relative paths.
Add the directory to the python path so binman can use this module.
Signed-off-by: Emmanuel Vadot
---
tools/binman/binman.py | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/binman/binma
On Fri, Jan 13, 2017 at 01:29:53AM +, Andre Przywara wrote:
> If we take the liberty to use register r0 to perform our bit set, we
> should be nice enough to tell the compiler about it.
> Add r0 to the clobber list to avoid potential mayhem.
>
> Signed-off-by: Andre Przywara
Acked-by: Maxime
On Fri, Jan 13, 2017 at 08:28:07AM +, André Przywara wrote:
> On 13/01/17 08:09, Vishnu Patekar wrote:
> Hi Vishnu,
>
> > Even for the single core cortex-a7, SMP bit should be set before
> > enabling MMU and cache.
> >
> > Reference: Cortex A7 r0p5 TRM. section 4.3.31.
>
> Ah, good point, th
On Fri, Jan 13, 2017 at 01:29:55AM +, Andre Przywara wrote:
> For some reason we were pretty conservative when defining the maximum
> SPL size for the Allwinner A80(sun9i) SoC.
> According to the manual the SRAM A1 is even 40KB, but the BROM
> probably still has the 32 KiB load limit. For the s
On Fri, Jan 13, 2017 at 01:29:56AM +, Andre Przywara wrote:
> Traditionally Allwinner SoCs have their boot ROM mapped just below 4GB,
> while the first SRAM region is mapped at address 0.
> With the extended physical memory support of the A80 this was changed,
> so the BROM is now at address 0
On Fri, Jan 13, 2017 at 01:29:57AM +, Andre Przywara wrote:
> Every armv8 board needs the memory map, so change the #ifdef to
> ARM64 to avoid enumerating every single board or SoC.
>
> Signed-off-by: Andre Przywara
Acked-by: Maxime Ripard
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
On Fri, Jan 13, 2017 at 01:29:59AM +, Andre Przywara wrote:
> The DRAM controller in the Allwinner H5 SoC is again very similar to
> the one in the H3 and A64.
> Based on the existing socid parameter, add support for this controller
> by reusing the bulk of the code and only deviating where nee
91 matches
Mail list logo
