[U-Boot] [PATCH v2 05/10] arm: dts: imx6ul-isiot: Add FEC node

[Jagan Teki]

From: Jagan Teki <ja...@amarulasolutions.com>

Add FEC node for Engicam Is.IoT MX6UL module.

Cc: Stefano Babic <sba...@denx.de>
Cc: Matteo Lisi <matteo.l...@engicam.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/dts/imx6ul-isiot.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/dts/imx6ul-isiot.dts b/arch/arm/dts/imx6ul-isiot.dts
index 4b1cc59..c46759a 100644
--- a/arch/arm/dts/imx6ul-isiot.dts
+++ b/arch/arm/dts/imx6ul-isiot.dts
@@ -59,6 +59,13 @@
        };
 };
 
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet1>;
+       phy-mode = "rmii";
+       status = "okay";
+};
+
 &i2c1 {
        clock-frequency = <100000>;
        pinctrl-names = "default";
@@ -89,6 +96,21 @@
 };
 
 &iomuxc {
+       pinctrl_enet1: enet1grp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO    0x1b0b0
+                       MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC     0x1b0b0
+                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+                       MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10       0x1b0b0
+               >;
+       };
+
        pinctrl_i2c1: i2c1grp {
                fsl,pins = <
                        MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot